pls inform time and location of TT once it's decided..
i might wanna join if its nearby..

whats your car colour? i have the stock front grill currently not using.. its black but the outer trim is painted with oem colour and mine is galaxy grey..

how old is your waja? 4g18 or campro / campro cps?
if just open pod for 4g18/campro wont do..
but if cps then its another matter.. heheh..

last week my frens neo cps dynoed at rs dyno..
he just replace his air intake with open pod while most of the rest is stock including extractors..
cps on paper states its a 125ps engine right.. dyno result of cps with an open pod shows the figure of 154hp!

ps - i'm going to speedworks this saturday.. warranty claim on my full system hotbits on my neo..

i think he have some 'toyols' inside but is not owning up to it..

guys.. which dyno machine better? rs dyno at puchong or speedworks?
just wondering if any of you had experience dynoing on both machines..

thanks..

last 2 weeks i dynoed my neo at rs dyno with a partially blocked midbox..
i didnt knew my midbox was broken when i dynoed but when the result came out it was a suprise as the numbers were quite low.. and robyn who did the dyno state everything was fine with my neo.. only when i got back to dori2 and told my tuner the result did he trouble shoot and found out about my midbox problem.. i guess if he's a really experienced guy then maybe he just couldnt care less about my dyno that day as i'm not a regular there..

last friday i sent my neo for warranty claim at speedworks for the midbox problem.. its the 2nd time.. 1st time my bullet kong.. now midbox.. and its not even 1 year yet.. so much for hotbits..

---

Added on December 20, 2010, 9:23 amjust install 1 pair for the front enough? blakang tak payah?
and whats the price for the front pair if not 'sponsored'?


This post has been edited by reef_d: Dec 20 2010, 09:23 AM

with that price, you most probably will get a worn steering oso.. better double that and get a halfcut momo subaru or evo steering.. 4 spoke leather.. around rm300.. a slightly cheaper option which i went for is a momo imitation steering wheel with real leather as the leather is soft giving nice grip.. those halfcut leather steering some times are a bit hard since they are already quite old, even tho looks like new..

attached pic is my momo imitation steering.. got it for rm200.. 80 for bosskit.. another 20 for installation.. love it cos it really gives new car feel.. heheh..

---

Added on December 22, 2010, 2:12 pmmostly they charge around rm200-rm250 to wrap the wheel..
depends on individual preference regarding wrapping..
have to remember.. when u wrap u are adding additional thickness to the steering wheel..
some ppl dont mind, some like their steering wheel feel thin.. some like it thick..

This post has been edited by reef_d: Dec 22 2010, 02:12 PM


Attached thumbnail(s)

better go buy the steering wrap from kedai abang.. more nicer.. cheap and like leather for the one they sell rm40.. the rm80 ones and above is real leather..

any1 knows if a headlamp can be fix if the beam adjuster (further/nearer) spoilt?

i really want to pasang HID kit but installer say no point installing if cannot adjust where the beam is pointed..
right now my right side headlight cannot adjust.. turn the screw on top of the headlight and nothing happens..

if the new projector got its own adjuster then ok laa but what if its seperated like the adjuster is part of the lamp housing and not the projector?

any1 using petronas syntium fully synthetic engine oil?
i'm clearing my store so got some extra engine oil selling of cheaply..

2 litre of syntium 1000 left inside a 4L bottle.. full bottle cost around RM150.. this 2 litre i'll sell 4 rm40 only..

1 litre of syntium 3000 left inside a 4L bottle.. full bottle cost around 180.. selling this 1 litre for rm20 only..

any1 interested pls pm..

if u have 3litre good enough ma..
just buy 1 litre bottle.. eon servis usually got sell 1 liter bottle.. i use to buy them when sending my waja there..

now since my neo already frequent dori2, my waja will start sending there too..
dori recommend for 5k interval or 8k interval service can use CITGO oils..
for 10k interval use castrol magnatec..

are you sure your absorbers are ok? no leaking at all? how old is it? if its oem and 2 years old i think its a good time to replace it..
also if you have a bent cornering arm that could also cause the klok klok sound..
thankfully 1 cornering arm doesnt cost much.. replaced it with labour for RM90 at an eon service center..

Since changing to rear heavy duty springs for my waja, i feel that my waja's rear is a bit lowered from stock.. some time i see some other waja which has very2 high rear, made the waja looks big! any idea how this is done?
stock spring + additional bushes?

especially for steven..

http://www.mudah.my/Stereng+full+leather+waja-7505460.htm



This post has been edited by reef_d: Dec 28 2010, 06:46 PM

any1 looking for cheap 2nd hand tyres for stock waja 15" rims can pm me..
i have 4 pieces of michelin energies for sale.. price very cheap!
just took them out today.. upgraded to pilot premacy..



ps - also still have 1 pair of rear heavy duty springs.. can fit waja, gen2, persona, neo n wira..

This post has been edited by reef_d: Dec 29 2010, 03:04 PM

traction A to AA worr..
and the energy is correct size for waja but oversized for my neo which is where its being used right now..
my neo lost some pickup because of this..

are you sure ah cannot use 205/45/16 on neo?
i used that setup before wor..

pickup very cun.. cornering oso very cun.. took a long sweeping corner at 110kmh..
maybe you are not using the stock suspension and spring.. dats y hitting the inner fender..

later i even use 195/55/16 with stock suspension..

still not hitting the fenders.. pickup n cornering suffered but in terms of grip, quietness and comfort, really a whole lot better then any tires i tried before.. also i used an online tyre calculator to do comparison..
let say stock 16" rims comes with 195/50/16.. when upgraded to 195/55/16.. the dimensions grew by 3.4% only..
not so good laa bcos the calculator says need to stay below 3% changes or some stuff wont be accurate like speed and braking dynamics also lari..

i MIGHT come on saturday morning IF i can get my new exhaust system installed by tmrw..
then its toyol installing time come saturday morning..

i tot that looks like standard projector pattern..
its looks identical like my oem projector..