NF7/NF7-S Rev2.0 Modded Bios, : Discussions and Results :)
|
|
 Dec 2 2006, 11:56 AM
Return to original view | Post
#21
|
 
Junior Member
298 posts Joined: May 2006 From: Klang  
|
@GKWong
Thank you for sharing the BIOS files. I should credit you for the nice POST screen that u custom made. I like it! By the way, I am still finger crossing that after flashing my BIOS, I need not have to swap to my spare BIOS yet. |
|
|
|
|
|
Dec 5 2006, 10:29 AM
Return to original view | Post
#22
|
|
Junior Member
298 posts Joined: May 2006 From: Klang
|
QUOTE(GKWong @ Dec 4 2006, 05:30 PM) no prob, glad u like my POST screen. nah, BIOS still show BIOS checksum error - default loaded. so now is ur BIOS still working fine?  I have to change with the spare BIOS and see what will happen afterward. |
|
|
Dec 20 2006, 11:15 AM
Return to original view | Post
#23
|
|
Junior Member
298 posts Joined: May 2006 From: Klang
|
QUOTE(Kuso @ Dec 20 2006, 10:55 AM) i m nf7-s rev2.0 user, anyone can help me here ? Mind to provide us your cpu's OPN? and what is the codename of your CPU (eg: Palomino, Thoroughbred or Barton)?previously i was using 2 x 256mb ddr333, so my setting was clockspeed 166mhz x 12.5 which was 2.09ghz, then ytd i change my ram to 1gb ddr400, y i unable to run at 200mhz x 10 >"<... anyone can help ? IIANM, I think your CPU is multiplier locked. |
|
|
Dec 21 2006, 07:27 AM
Return to original view | Post
#24
|
|
Junior Member
298 posts Joined: May 2006 From: Klang
|
QUOTE(GKWong @ Dec 20 2006, 04:59 PM) any CPU-Z screenshot? what is the symptom when u set the multiplier to and fsb to 200x10? cant boot or remain same? I seconded GKWong. Kuso, if u able to provide us your screenshot of CPU-Z, that would be informative for us to see clearly what happened to your setup. We'll try to rectify this matter.try to set ur fsb at default and change only the multiplier. |
|
|
Dec 22 2006, 07:21 PM
Return to original view | Post
#25
|
|
Junior Member
298 posts Joined: May 2006 From: Klang
|
@Kuso
D26-MantaRays-XT - suitable for RAM stick with one side attached with chips D26-MantaRays-XT-CPC - suitable for RAM stick with two side (both) attached with chips |
|
|
Jan 23 2007, 03:43 PM
Return to original view | Post
#26
|
|
Junior Member
298 posts Joined: May 2006 From: Klang
|
I've retired from using nforce2 mainboard.. I used AM2 system now.
|
|
|
Jan 23 2007, 10:56 PM
Return to original view | Post
#27
|
|
Junior Member
298 posts Joined: May 2006 From: Klang
|
QUOTE(GKWong @ Jan 23 2007, 10:50 PM) ic...nice! so after retired from nforce2, plan to sell ur stuff?? Already sold the barton cpu and nvidia geforce 6800 gs. And the DDR400 RAM is on the way to be sold.The mainboard, hmm  I have yet to find the problem of inability to save BIOS setting permanently. I do not dare to sell this mainboard unless I able to fix the problem first. |
|
|
May 8 2007, 12:02 PM
Return to original view | Post
#28
|
|
Junior Member
298 posts Joined: May 2006 From: Klang
|
Anyone know where I can find a suitable person to repair abit NF7-S v2.0 mainboard? I think the mainboard has faulty BIOS chip. Maybe else the socket that hold the BIOS chip is damaged, or some electronic device soldered on the mainboard is not functional as expected.
I am still keeping this old mainboard. I have planned to sell, but on second thought, why not I repair it and make it as additional home server at my house? The symptom is inability to retain a BIOS setting. Even I cold boot or hot boot, sometimes the BIOS setting reset to default. I even changed the CMOS battery to a new one. This post has been edited by coolblade: May 8 2007, 12:03 PM |
| Change to: |  0.0298sec
 0.36
 7 queries
 GZIP Disabled
Time is now: 3rd December 2025 - 07:22 AM |
Quote