Leave CPU INTERFACE ON
u get higher memory bandwidht with it and better performance in super pi and overall system performance

if you turn it off, you get higher fsb...but most of the time, lower clock can already achieve what you achieve at higher fsb with CPU interface on.

make sure its on la
i can do 245 with cpu interface. but when i use 230 mhz with cpu interface on, my sandra memory benchmark is higher than the 245( Cpu interface off) at the same timing

This post has been edited by thefryingfox: Jul 10 2005, 09:19 AM

ok thanksw for the info

i will leave my cpu interface enale than...

how about cpu thermal throttlinf shoul i disable it as well?

check here

http://www.abit-usa.com/downloads/bios/bio...ies=1&model=124

thermal throttle should be turn off for more stable oc

Tictac, why u didnt try come out a new bios tat will report the processor in PR rating? Sometime when other ppl c 2.4ghz Axp, they say it slower den their 3000+ . >_< Since u can change the name for mobile Ahtlon to AXP-M sure u can do it. ^^ My 2nd soltek mobo bios can report in PR. I wonder why abit didnt do it.

This post has been edited by Cyclone87: Jul 10 2005, 12:13 PM

someone should post something about bios tweaking!

- such as what to on an off at the bios!

no people try vdd pencil trick?

gsan wat voltage u set on ur vdd??

1.7v, i tried with the vdd pencil trick, but measure with multimeter, the vdd voltage still same, no increase.

me now using d26 MantaRays XT 2T

best for my rig!

This post has been edited by Mr_47: Jul 11 2005, 01:39 PM

I found that D26 MantaRays Xt 2T giv me less Bandwidth efficiency but can go higher FSB. Btw any guide for Vdd pencil mod?

if ya follow it exactly like the guide, it won;t work...i've tried shading the resistor or watever it is wif a few stroke using a 2b pencil but nothing happens...then i tried 10-20 strokes only 0.05v increment then when i cover the whole thing with led it's slightly higher than wat i wanted (2.1v max) and i hafto repeat the process for quite a lot of times b4 i manage to tweak it according to wat i wanted

so, could you show me how do you pencil it? izzit pencil the whole resistor or just around the side of it?

just pencil the whole resistor....at least tat's wat i;m doing...there's so lil space in the side u can't possible put enuogh led there to not intefere with other resistors or wateve besides it

L12 wiretrick is better thn pencil's i guess.

Guys, dont try D27 Taipan 2T with 250x10bios.AHAH

D27 Taipan 1T is much better

D27 3DFire 2T vs D26 MantaRays Xt 2T give me same bandwidth in my rig

This post has been edited by Mr_47: Jul 12 2005, 04:12 PM

i dunno bout u guys but had any 1 tried burning their proc using a program named S&M??? i'm having issues like auto-reboot in the middle when the prog is stressing my system memory...only occurs when i use modded bios D26 Mantaray XT and D27 3DFIRE (only tried both of these though) even when everything is running stock....everything seems to be ok when i switched back to stock D27 bios....just wondering whether any others if experiencing the same thing as i am

This post has been edited by evildonkey: Jul 12 2005, 09:26 PM

S&M

mmmm.......never heard about it!

BTW: gonna search and try it later.

Any One Want To Buy

NF7-S V2.0

Please PM Me Thanks

why wanna sell?ahah

anyone get RMA for nf7-s before???how long?