Content

• Old GodZyla To GodZyla MK III (The Establishment)
• Lian Li PC 12 (Intro to this case and it's function) <-- See Below
• GodZyla - The Revamp of MK III <-- See Below
• D.I.Y Sata Sleeve <- See below
• The Making Of GodZyla Ram Cooler <-- Click Here
• The Making Of GodZyla Hard Disk Cooler <-- Click Here
• Cost Effective Way To Make Blow Holes <-- Click Here
• A Simple Fan Hub Or Fan Bus Bay <-- Click Here
• 3 Pin Fan Hub <-- Click Here
• Glowing Case Feet <-- Click Here
• Simple On/Off Switch For PC <-- Click Here
• Simple Cable Management <-- Click Here

Old GodZyla To GodZyla III


Lian Li PC 12


GodZyla - The Revamp of MK III


D.I.Y Sata Sleeve


The Making Of GodZyla Ram Cooler


The Making Of GodZyla Hard Disk Cooler


The Making Of GodZyla Glowing Case Feet


The Making Of GodZyla - 3Pin Fan Hub

---

Added on August 8, 2010, 11:55 amPart II - Making of Dark Revolation

This was a project done with a friend.

This post has been edited by KleoZy: Jan 8 2023, 07:32 PM

cool bro

good job! blink blink

wow cun meh...btw y the name Godzyla?
ur Gf name ziela ka?

waaha so bright..

my eyess burnnn..

Thank You!

Ya abit too blink lol..

Nope, I like the dino call Godzilla, however change it to GodZyla cos my nick has a Zy

don't burnn don't burnn lol...

omg,looks so nice

Thank You Thank You.. following is a project with a good friend

Dark Revelation








This is kind of time consuming but end result is what you see above


This post has been edited by KleoZy: Aug 15 2010, 01:54 AM

such cool names for rigs nice lights u got there bro.huhu

woah, nice lights you have bro

How is the energy consumption? Is it high?

Do you use a power regulator?

Power consumption not high as most of the lightings have switches to turn it off when not needed.

this is poisoning.. arghhh..

cool case

OMG~ Really, I love this one!! How long dya take to finish all the sleeves?

PS: Now Im really shame with my machine~

This post has been edited by gengstapo: Sep 23 2010, 02:27 AM

thx for sharing~~

My com died on my and it's serving me well for 9 faithful years.
well going to revive this post and this should be my last journal on PC build.

Just for remembrance. 2019

Hardware Introduction






Preparation




DIY Projects






Tips & Tricks




There will be more videos at later stage.

This post has been edited by KleoZy: Jan 6 2020, 09:55 PM

Honestly this is one damn good budget case. just to share with you fellow friends at Malaysia.
Thanks to your country got this case at a very good deal.

It might not be good quality as compared to Fractal Design Mestify nor to the Phanteks P400A but it's pack with features and comes with good pack of accessories.
very thoughtful of this case company. oh well for those wanted budget case and spend more on other stuff like GFX and so. check this case out.
I believe Malaysia have other online shops which sell this case for cheap

anyway happy with this purchase.. thank you!

Just to update on what's done.


and some other stuff on Lian Li Lancool II

Just to share. i think this should be useful for those who want to know more about fans and how to maintain their PC fans.

Sept Updates

Experimenting this as opportunity with case airflow and to do some mods on a Zotac RTX 2080 Super. Surprising result.

Just to share how to maintain your PC components. mainly anything with PCB,
in this vid I will share with you by using electronic cleaner, you will be able to preserve your card which will looks brand new. (tip, easy to sell with a brand new looking card)
This include how I bring the heatsink back to shine.

Just to reply my viewers on Youtube about RTX 3000 series card with my current rig setup. I do not intend to get the RTX 3000 series but still able to share what I know based on numerous RTX 3000 series card dimension.

Just got this SL120 Lian Li UNI Fans and to share my thoughts about these ARGB fans.

Part I[U]


Part II[U]


This post has been edited by KleoZy: Oct 17 2020, 04:32 AM

hmm. some 120mm fan testing.. non and argb fans


This post has been edited by KleoZy: Nov 9 2020, 02:26 AM

In depth on how to use the Lian Li UNI Fan SL120 controller

Done a pressure test on some 120mm fans which I have selected out from my previous video. just like to share.

Took my time and my main focus is to have a functional workstation, definitely not a desk for gamers.


This post has been edited by KleoZy: Nov 21 2020, 10:52 PM

For those who fancy the Lian Li O11 Dynamic mini. There are some findings that you might be interested.

Answering some of the question asked by viewers.

nice case 011 dyamic mini

This post has been edited by Blinklime: Dec 1 2020, 01:55 AM

Thank you for the compliment though I prefer black then white. i got an issue which I found a fix

another weekend vid just to answer some viewers

in progress with some modification and preparation before I migrate my current PC component to this o11d mini

While still working on my mini . I like to wish everyone here Merry Christmas and a Happy New Year.

here are some humble PC Builds in Singapore which I have collected. mainly are from friends.. Enjoy!

Happy New Year everyone, I have migrated my old PC component from my Lan Li Lancool II case to this O11D mini. Enjoy!

using uni fan controller on other argb fans. why not.. at least it's unique lol

Just to share how you can connect your Galahad AIO to the Uni Fan Controller

Just to share as this basic fix my help those who are unable to get their uni fan controller working.

Just to share experiences on radiator & GPU in a o11d mini case with a ATX form factor motherboard.

Just to share some toys i've gotten

Did an unboxing on the EK 360 Elite AIO. Just to share.

A small project which I have done base as in up the power on LED to sync up with the aRGB controller on the top panel of the Lian Li Lancool II, this apply to the Lancool II Mesh RGB case.



Pardon me, miss out some details, kindly watch Part II too. thank you!


This post has been edited by KleoZy: Feb 13 2021, 01:19 AM

How to use Strimer plus with Uni Fan Controller

Since done almost all the Lian Li Products.
might as well do up the combo. Just to share.

Having a hard time getting the Lian Li Argb cable kit plus is super duper expensive to purchase online.
so do self crimping.

Just to update some of the vids.

more vid update

more updates

This might be useful to some who wishes to reduce noice in their PC Case.

For those looking for M-ATX case and do not wish to break your pocket.. this case is seriously good.

I have finish building some pc parts to this case. seriously no sweat, so spacious and good airflow when you throw in good fans like the Gentle typhoon or Arctic P12 (non argb version)



This post has been edited by KleoZy: Sep 21 2021, 09:17 AM

This post has been edited by KleoZy: Sep 25 2021, 10:34 AM

Looks badass.

the badass infact is the Montech Air 100 Lite or the ARGB case.
seriously good case, spacious and good airflow. will upload the test this week.

This is my style in PC build.

Finally got to test the AL120 vs SL120, waited for so long, just curious what these fans can do.

hmm. had alot teens from UK and USA asking me the same old question via email and through another communication portal. Just to share with you

A good friend of mine got this liquid AIO and have requested me to have a look. though it might not fight with the big boys but for normal usage. it's not too shabby.



This post has been edited by KleoZy: Oct 10 2021, 10:34 PM

Just to share the experience with this Be Quiet! Silent Loop 2 AIO.

pretty interesting case. first time taking up the challenge to build an ITX case

This is one rare case to get. Happy to share it with you. nothing fancy but consider a collector's item.

feeling uneasy about the temperature of the taku build. I have changed the air cooler and the result is amazing.



Bequiet! Silent Loop 2 280, not a bad liquid cooler. just like to share.

hmm.. this is not new but I often do this for friends build or even old system which I either sell or donate out.

Trying out something new and will like to share

This was challenging, anyway just to share, impressive temperature though not a high-end PC.

Just to share a ARGB Fan set from Gelid

Being selected to be one of the beta tester, it was fun and when the official release of the L-Connect 3, I run into issues which I found ways to revolve them. I will share this info with you. Enjoy!

I have fun with the AL and SL fans with the L-Connect 3 application. Just like to share.



This post has been edited by KleoZy: Apr 30 2022, 05:48 AM

I had fun with the strimer plus using the L-Connect 3 app and I will share it with you.

The improve version of Strimer Plus (Version 2)

It's been a while I have not used Aircoolers and thanks to Gelid and BlkSoda who have arrange these aircoolers for me to play with.. I will like to share my experience and impression of these aircoolers.

This is another good budget case that will not break your pocket.

I am delighted to share with you what my thought when building PC Component in this case (Tecware Flatline)

more vids will be out real soon

This post has been edited by KleoZy: Jun 12 2022, 04:09 AM

Is far more advance uni fan which I have experience. I will like to share it with you



This post has been edited by KleoZy: Jun 19 2022, 09:52 PM

I do like this case but time to move on. as a remembrance.

This might not be fanciful but it's cheap and does it's job well.

3 PC Aircooler which got hold of my attaction. hear good things about them so decided to test them out.
these videos are only part 1, there is a part two where I test and compete the thermal performance against each cooler.

Scythe Fuma 2 Rev B



Thermalright Peerless Assasin 120mm Black


Deepcool AK620


This post has been edited by KleoZy: Jul 2 2022, 10:13 PM

This is part two, thermal performance of the CPU Air Coolers.

Out of curiousity, if those wondering how does lian li uni fan performs on Liquid AIO, this might answer your question and please note, it's not a full test as noise test is not included. Just sharing my opinion.

Done an in-depth case open view and like to share.


This post has been edited by KleoZy: Jul 18 2022, 07:28 PM

Just like to share and hopefully this will aid you to resolve your L-Connect 3 issues.

Just to share, if you have this case and wonder if it can mount a 420 Liquid AIO?

This is how I did it.

Taking the time to do this test right, I have done some of the Fan directions (Intake & Exhaust) with this Lian Li Lancool III chassis and the Arctic Liquid Freezer II 420 at the top of this chassis. These are my findings and will like to sharing my experience with you.

If you have purchase an Arctic Liquid Freezer II between May 2021 to March 2022, you might need a service kit from Arctic to replace the gasket and cold pate. Arcitc did acknowledge there is an issue and I will like to share and to show how it its fixed.

The Lian Li SP850 SFX power supply is new in the market and I will like to share with you my impression and to share some tips & tricks with you.
Besides this, there is an ongoing event at Lian Li, the early access program on the new upcoming Lancool 216 chassis. For those of you who are interested, you might want to take part here https://www.reddit.com/r/lianli/comments/xw...access_program/


This post has been edited by KleoZy: Oct 9 2022, 02:35 PM

I am amazed by this small tower M-ATX case, it's so elegant.
therefore have reached out to Asustek Singapore and am so gald they are able to loan this for me to share with you.

Hi Everyone, this might not be new to those who knew about Arctic Liquid Freezer II but to me it's a huge discovery, I will like to share this information with you on the amazing engineer work done by Arctic.

I have seen lots of good review about this Liquid AIO and I wonder how good or how cool it is. I like to thank Deepcool to have provided this AIO for me to share with you.

Once again with curiousity, I have test out these 5 liquid AIOs. I have done two to three times on each AIOs as to be sure the readings I took are accurate. Therefore which Liquid AIOs provides the best cooling, watch to find out more. Thank you!

Arctic have recently launched the MX 6 Thermal paste recently and I am curious on how this thermal paste perform, so I have tested it and will like to share my experience with you.

Lian Li have launched the SL120 & SL140 V2, I have done three part of it.