I just called to subscribe. After reading 64 pages, my eyes are blur and worrying due to the DIR-615 frying issue.

so far no frying for me here... only that the port forwarding not working...

Dont worry it wont catch fire and burn ur house hehe

Best quote for the whole thread! just kidding ok?

This post has been edited by billytong: Aug 24 2010, 03:30 PM

Same for me. The port forwarding doesn't work.

What is the best option to rectify this problem with IPTV service maintain?

Hi Guys,


Does anybody of you have and/or know how to access the alcatel BTU to do some reconfiguration of it ? I would like to know some basics about it before i start. I would like to get the SIP out of the box into the correct box & reconfigure it so it is not accessible from outside as I heard.

Anybody with a starting point around here ?

Regards,

Gompf

i am on 10mbps unifi, but speedtest normally at 5-6mbps only.. should i complain to tmnet?

Yes you should if you get that kind of speed consistently. If you only get 5-6mbps on VIP/BIZ10, might as well you go for the 5mbps package instead.

Want specification of switch is require to replace the D-link DIR-615? Do we have similar switch that is more easily available in Malaysia to recommend in stead of Mikrotek RB250GS?

It needs to support port based and tag based VLANs. The RB250GS is probably the cheapest and most easily accessible managed switch on the market at the moment. It's also already been tested by 4 people here and confirmed to be working well with Unifi.

Does this also mean BT will not be working?


Btw, the lady called to confirm me the installation date. She asked me to prepare 4 extension plugs. What does this mean?

This post has been edited by DT8: Aug 24 2010, 05:37 PM

4 x port extension power cord for 3 pin.

This is for the devices that you will be getting from them for usage. BTU(Fiber Optic Modem), DIR-615(Router/Switch/WiFi AP), STB(IPTV Device), DECT Phone (Cordless Phone)

Of course it depends if you want to put all these 4 device together in one place. Anyway asking you to do this is just for testing purpose for their technician.

The problem right now is RB250GS only available in Singapore and already out of stock due to overhelming demand from Unifi users.

That's why. Because the wireless router I'll put upstair.

So, DIR-15 cannot be portforwarded means no BT?

...& there re 3 different brand of GPON unit..

Huawei, Fiberhome & Alcatel Lucent

---

Added on August 24, 2010, 6:23 pmThis post has been edited by nidup: Aug 24 2010, 06:23 PM

Can anyone please tell me DIR-15 cannot be portforwarded means no BT?

well mine can, BT-ing~

Another question guys,

Once I've installed the unifi, my desktop will no longer using Ethernet cable anymore but Wifi since the equipments are located downstair. Does this affect the speed drastically?

No as long the signal strength and quality is not very bad.

There are mikrotik distributors all over the world ._.

http://www.roc-noc.com/product.php?productid=381

Someone need to do bulk Orderz