[attachmentid=2013654][attachmentid=2013656][attachmentid=2013664]

Here's my newly setup WC bought from Ezzy..
Now doing leak test. 

[attachmentid=2017240]

The left side is before using WC, right side is when using WC. 
Looks good? The temp fluctuates often, between 1'c - 2'c as compared to using stock HSF.

If those never used HWMonitor before, there's 3 temp being displayed.

Current Temp | Min Temp | Max Temp
OMG    After posting the above, i went to YouTube and watch a tutorial vid on CPU WB installtion,
and suddenly notice that i forgot something important. I forgot to remove the protective sticker!!! 
HAHAHAH        
GOSH, im so noob...well, this is my 2nd time doing WC installation, due to eagerness to get the system running,
i made a silly mistake.
[attachmentid=2017255]

Even with the protective sticker still attached, the temp is a bit cooler than stock HSF, luckly didn't overheat.

@kakicam
1 question...how did u fill ur loop??
seems like :
pump>>rad>>cpu wb>>gpu wb>>res>>back to pump

the inlet after gpu wb to res shoud be at bottom...so u can open the res cap to release the trap air...
for ur current setup i think its hard for u to open the res cap...

owh..ok,u have the tube inside ur res...
thats why u can open it..
btw better u change the inlet...
easy 4 u to fill the loop next time....just my 2 cents...

@kakicam
what i see your problem is ur outlet gc wb coz the 2nd gc blocking the bottom outlet..try change to bottom and used 45 or 90deg
and route it to res bottom inlet..

Photo is kindda dark or having low exposure, can't view clearly

H20 cooled system in.....  is tht Graphite Series 600T casing?

Where's the rad?

nice setup bro..

hey bro. nice setup. the 950 is really that hot. lol. ur temps are same like mine. cannot do much :/

Hi guys, another noob question

how do you adjust the direction of bitspower angle fittings ? im pretty sure it is adjustable since i saw quite alot of pic showing them in different direction but i just dont get how it works...

i mean the non-rotary version of angle fittings, how do i noe which direction it will face after installed? 

I'm idling around 39-43 on all cores. load around 69-75.

you are using 360Rad rite? I'm using 480Rad.. maybe that contributed on the slightly lower temp on load..

yea bitspower sell them, here Bitspower Silver Shining 90-Degree IG1/4" Adapter - BP-WTP-C39

USD699 

1799 bang

still remember my mod? > http://forum.lowyat.net/topic/1493133/+1240
well, i've made another run with more ice and longer period.



booyeah 0degree!   

but this time condensation happened. have to shutdown immediately.

spamming here...   
Cable Management and added wheel to the case.

Laing DDC with EK top 

ic, i'm not the kind of guy who would make the jump so easily not until i see more bugs fixes and more 3rd party coolings. so in the mean time i will just wait and see. besides I hate it when everytime i have to spend the whole day tearing out my wc and skip lunch just to replace my mobo. it's such a chore lol. maybe i don't like wc'ing after all haha

Erm, not using SB. 980 atm.

4.5 on air? no way unless in a aircon room with case open. plus using 2x super high rpm fan. keke

max i can go with my venomous now is 4.2 nia with linx load temps 80+

1.29, quite high to get it stable