@jibek
neat setup bro...ur customer will be happy to see that

@owikh
dang...nice crazy setup bro!!!as always

@jack_ass69
where's the pic??

I bet it's gonna look like million dollar pc when it's done.  Damn...I like that dual tube res.

jack, what happened to your case?

i saw a kink tube between cpu wb and mosfet...
but its still ok i think...
that mobo

aik is that bp mobo block..?

updated.. adding some EK Dominator Ram waterblock.. thanks to Pis

if using EK HF full nickel with pure distilled water only no problem right?
im thinking of upgrading my cpu wb...

maybe can add another 45 degree adapter or longer then tube...

---

Added on June 15, 2011, 11:08 amur tube from pump to mobo also very tense...

ya bro..  got kink there u gonna have to use adapter or change the routing

jack, if the mobo block and the CPU block are on the same height, then can simply use the 90degree barbs, like the one in black color that's already on your mobo.  Looks good too with a pair of parallel 45degree orientation tube.

dont worry bro.. just get a pair of 45 or 90 degree adapter.. problem settled

hehe...nice setup bro!!!
what  brand of tubing u use??feser??looks like the tube is kink...
try change the orientation of the tube from mosfet to cpu wb to other side...just change the orientation with the tube from rad...
last time i use promoflex...less kink IMO ...

jack, these are the examples:
[attachmentid=2276265]
[attachmentid=2276266]

By the way, that kink looks real bad.  With the pump pushing the water, that kink is a big restriction for the flow.  Pressure will build up, and leak will occur at weak connection point.  At worst situation, it's possible that the tube will disconnect from the barb fitting and spraying water all over the place...

yes u are right...plus his using ek4.0 pump,mobo wb+cpu wb(LT) is big restriction to the flow already...but still can do the job nicely...
yeah and that 2xbitspower 90deg cost a bomb also...hehe

my wc rig 

WATERCOOLING :
1) EK Supreme HF nickel Acetal
2) Laing D5 + MCP655 pump.
3) EK Coolstream Radiator 360mm + EK Coolstream 240mm +
GTS 360mm radiator.
4) Bitspower 45 deg rotary adapter silver shining
5) Bitspower 90 deg rotary adapter silver shining
6) Bitspower 90 deg dual rotary adapter silver shining
7) Bitspower extender, multitransfer, male to male adapter,plug etc.
8) Bitspower Dual D5 Mod Top + Silver shining mod kit for pump
9) EK Advanced Reservoir 250ML
10) Koolance 360 Rad Shroud
11) Koolance Water Flow meter
12) Mounting Bracket
13) White Tubing 1/2" 3/4" Non UV reactive.
14) Termochill Red UV reactive Coolant Fluid.



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us



Uploaded with ImageShack.us

thermal paste is widely available at any shop nearby, including this TX4.
I'm still using the older TX2 since it's easier to apply & I bought 20pcs last time.

---

Added on July 17, 2011, 11:23 amIf u cut the thermal pad into small square pieces according to manual that would be enough.
But i prefer to cut it in long rectangular shape to paste on the adjacent chips at one shot so that it will stick firmly.

---

Added on July 17, 2011, 12:35 pmmy temporary rig powered by UD7...



comments are welcome before moving to MIVE-Z + wb