AMD® Socket AM2&AM3 Overclocking V23, It has come!Bulldozer heat is around us.
|
|
 Aug 8 2010, 12:51 PM
Return to original view | Post
#1
|
 
Senior Member
1,413 posts Joined: Aug 2009 From: Damansara   
|
QUOTE(shahriranuar @ Aug 8 2010, 11:33 AM) i am guessing that too go to advanced>>jumper free config>>cpu over voltage>>use numpad "+" to increase the Vcore..cos its below 1.. and the temps are around 43-47 how am i suppose to adjust the cpu volt?  |
|
|
|
|
|
Aug 8 2010, 12:53 PM
Return to original view | Post
#2
|
|
Senior Member
1,413 posts Joined: Aug 2009 From: Damansara
|
QUOTE(shahriranuar @ Aug 8 2010, 12:51 PM) ok done and done.. just try with prime95,see got error or not..if BSOD,up ur Vcore a bit more..i use PCProbe II to monitor the temp..here is my new cpu-z..the core voltage peaked at 1.4 [attachmentid=1715105] now how do i check my cpu temp? and is it safe me 2 try prime95? and do i use it exactly.. sorry bout all d questions.. very new to this |
|
|
Aug 8 2010, 01:05 PM
Return to original view | Post
#3
|
|
Senior Member
1,413 posts Joined: Aug 2009 From: Damansara
|
QUOTE(shahriranuar @ Aug 8 2010, 12:57 PM) so at prime95 i just run a blend test? its up to u bro..if ur proc really not stable it will crash immediately in just a few second or 10 minutes time..what RAM did u use?..and how long shld it run? Added on August 8, 2010, 12:58 pm |
|
|
Aug 8 2010, 01:13 PM
Return to original view | Post
#4
|
|
Senior Member
1,413 posts Joined: Aug 2009 From: Damansara
|
QUOTE(shahriranuar @ Aug 8 2010, 01:07 PM) im using kingston ddr3 1333 i try others monitor b4 but failed..PCProbe the only one can see coz it read the cpu temp directly from bios..running prime95 now bro..but cant seem to install the pcprobe..any other monitors? and +1 for HWmonitor as well.. This post has been edited by angrysnail: Aug 8 2010, 01:15 PM |
|
|
Aug 8 2010, 06:08 PM
Return to original view | Post
#5
|
|
Senior Member
1,413 posts Joined: Aug 2009 From: Damansara
|
QUOTE(shahriranuar @ Aug 8 2010, 06:02 PM) when i change it back to 2 core it will show 555be what do u set on ACC?..i set it to ALL CORE..everyday boot up as Quad core.. when 4 core b55 x4 and yup if i restart again and set everything back at bios it will be ok is dis normal?  |
|
|
Aug 8 2010, 07:06 PM
Return to original view | Post
#6
|
|
Senior Member
1,413 posts Joined: Aug 2009 From: Damansara
|
haha..u mobo same like me what..i bought this proc on april..the different only ram..i got this issue last time but worst..test prime95,it stable but next day boot up,give me BSOD..i guess my ram timing to tight,then loose it a bit..then ok till today..what is urs RAM setting btw?..
|
|
|
|
|
|
Aug 8 2010, 07:15 PM
Return to original view | Post
#7
|
|
Senior Member
1,413 posts Joined: Aug 2009 From: Damansara
|
QUOTE(alan kc @ Aug 8 2010, 07:10 PM) He didnt adjust d ram timing..nw his problem is need to go to bios to unlock core everytime he start up. Oo..yeah,i 4got about the bios version as well..Added on August 8, 2010, 7:11 pm Sometime like that is bios problem. |
|
|
Aug 8 2010, 09:20 PM
Return to original view | Post
#8
|
|
Senior Member
1,413 posts Joined: Aug 2009 From: Damansara
|
QUOTE(shahriranuar @ Aug 8 2010, 08:29 PM) SUCCESSFULLY UPDATED BIOS!!!!!!!!!!!!!!!!! Nice bro..hehe.. WOOOOHOOOO!! now everything ok d.. updated bios using asus update utility it was easy~~ thank u everyone!  |
|
|
Aug 11 2010, 09:56 PM
Return to original view | Post
#9
|
|
Senior Member
1,413 posts Joined: Aug 2009 From: Damansara
|
QUOTE(shinjite @ Aug 11 2010, 05:00 PM) Weird....priming mine at quad core stock speeds, RAM set at 1066 5-5-5-15 will fail even with Vdimm 2.1v-2.2v (My OCZs are rated at 1066 5-5-5-15) same like mine..OCZ rated 7-7-7-20@1.8,always fail..now on 8-8-8-24@1.7,prime stable 3 hours at B55@3.4Ghz..But set at 800 no fail ~_~ When OCed only, Core 0 always fail, no matter what test conclusion 1333 not stable,1066 stable..  |
|
Topic ClosedOptions
|
| Change to: |  0.0334sec
 0.42
 7 queries
 GZIP Disabled
Time is now: 3rd December 2025 - 06:07 PM |
Quote