my fren tried again, same, top up around 1820 @ 7-8-7, 1826 can last for a while, 1840 straight fail, guess it's d wall @ such timing on older architectures. either he rents a thuban again or just contented w/ 1820. can't break d gskill flare's 1840 record by sir Louislkw...

have yet to try 8-8-8 but i doubt there'll be much improvement in term of mileage, tried 1880 bootable (@ cas 8) but nowhere near benchable, let alone prime stable.

i'm kinda tired testin d 955 on my 690g, decided to try to kill d board & chip, primin small fft @ 3.9ghz w/ 1.49v...

690g? why go bck to ddr2 bro, tot last tyme u use ddr3?

Bcoz he's an old timer he like to use old things, the older the chipset is the better

ke org nyer tua

kurang asam... when i'm angry i do kill chips...

not so old lah... look like this only...



This post has been edited by ah_khoo: Jul 28 2010, 11:57 PM

Hahahaha, kill no hal, ganti with 2 sticks of HP rams & one hell of a good kuhler

If u look like that, then i look like what? This eh?

He He He....i left the sign already...

i know you will find it some how....

you must be eating all the Ram Bibble ehh ah_khoo bro...

Ram bible lol, sis verdict, bile nk update database phenom II OC kt OC database eh.......

2 sticks of Hewlett Packets oem ram? not a problem bro. last time i checked my amd heatpipe cooler performed greatly. so is it a deal?

1.5v reboot lagi... arghh!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

meh... there's nothing to do w/ how gud i am sis, thanks to google for makin complicated search possible within just few minutes.

u should have removed d xmp-2200 sis...

all u need now is a 8xx board (& a thuban mebe), even el cheapo board like ahsos 88td-v evo /usb3 can bring d ram to another level... i mean ram mileage wise lah... cpu clock not so sure coz 955 seems to be performed not up to d standard if compared to mother of cheapskate boards in 790gx a3+.

This post has been edited by ah_khoo: Jul 29 2010, 10:10 AM

By next week the database would be updated...lil patient is needed... If only i can eat mee maggi like you guys did,sure senang hidup....but i cant eat mee maggi otherwise i will suffer for stomach ache...

apa yg reboot bro?

This post has been edited by verdict: Jul 29 2010, 01:15 AM

bailklah, hoho

Last Pi session for tonight...

i didnt put much effort on this run...no CPU Tweaker using during this session...

Good night AMD freak!!!

quite high temps there, ur using custom WC to tame the temps ryte?

Finally got back my rig, fixed the leak and currently priming at my OCed settings of 300x11 = 3300Mhz with 1.46V on load (yeah, it needs that high without crashing )

Custom prime settings with enabled FFTs = avg 45c, max is 47c (aircond room), gonna try without aircond tomorrow (results are wonderful, way better than last time)

wow, really like the temperature.
1.46v, full load 45c, air cond room.
how about idle temperature?

dem you WC user, ak jeles, ni yg wat ak x sabor2 nk lap cooler ak nie!

Update, 49c maximum after 1 hour of priming (guess its enough ler, lazy adi )
But avg 43-46c depending on which FFT it is calculating
Idle around 29-30c in aircond room, non aircond around 34-36c

So without aircond should be estimated 53c max, need to add another fan for the radiator. Currently using 1 fan only

This post has been edited by shinjite: Jul 29 2010, 04:44 AM

Maybe... max temp during priming is 56-57 IINM...

and idle is around 38...

can't lah sis, nanti jadik botak cam i how... x hensem...

690g + 955be reboot... tonite try 1.6v again...

this is what i managed last time w/ team dark 1600 lv on gd70... i'm dead sure d skill pi can do alot better than this...

http://forum.lowyat.net/index.php?act=Atta...post&id=1458349

Found out that priming FFTs at 8k uses more power hence higher CPU temps

Currently priming small FFTs without aircond, 8k can go up to 55c max, next 1 at 10k, dropped to 51c load. Improvement indeed a lot
Air cooling around 58-62c