there's no value ram that can do wonders nowadays... those like dom gt cost an arm & leg... i miss those days where we can get kvr w/ premium chippies... premium stuff gettin more & more expensive... 

7-8-7 tu no a mammoth task sis, if i were to ask i 'd demand abg otromen to do a 7-7-7 @ 1800 & above... 
mane sis verdict... i want at least 1800 @ 6-6-6... 

for a start i demand a 1600 @ 6-6-6... com'on sis... it's about time for u to ditch d 790fx & embrace 890fx... 

no wonder abg otromen can't concentrate on his oc, ruper2 nyer got new prawn farm... 

500gb f3
Today you go to get ram aite?

this just in

someone just got a new set of ram

ah_khoo, whacking 1.71v to RAM still causes worker failures & memtest error

My settings:
cpu volt: 1.35v
cpu-nb: auto
bus speed: 279mhz
cpu mul: 11x
cpu mhz: 3079mhz
htt mhz: 1959mhz
nb mhz: 1959mhz
ram volt: 1.7125v
ram div: 3:10 (1333)
ram mhz: 1866mhz
timings: 27-7-8-7 2T

Got any ideas?

Right now just running back at a safe & manageable speed of 1724 cl8-8-8 at 1.65v.. Will have another go at it after work today 

u did try copy ah khoo's setting? include subtiming..
higher divider no good also bro?

hey2 sifu..
if there such thing that proc dont like certain multi?
i thought intel only got.. i just realize it now..

ram i knew.some ram/mobo/both combo not like some divider.. .
but CPU multi kindda new to me.. i just encounterd once.. 5 min reboot in 13.5x but 1hr prime stable in 13x..
huge stability different..

anyway..thanks sis.. update result of ur ram faster..

htt volt & nb volt @ stock? u mite wanna consider givin 'em a bit of boost... there's no harm especially vhtt... start from 1800 @ 7-8-7 then slowly increase from there bro... 1866 @ cas 7 rite away mite be a bit hard for d imc/board to swallow... 

u just need sometimes to get used to it sis, com'on, u just had it for a day or 2 so dun be too hard on yaself... which model ur havin sctually, mind 2 share? 

w/ that kinda price i'd rather go for those confirmed w/ hypers, like super talent or dom gt... 
yalor, to think that a pair of ram cost more than a decent board... hp ram sure a luxury toy to have nowadays... 

any progress bro? mind to include cpu-tweaker in ya ss as well? or... can i virtually borrow ya rig for a while by usin log me in? 

She going to the darkside?   

I wanted to ask a long time now but kept forgetting ah, usually for DDR3 what value do we put best for the refresh cycle time when ocing the rams? 110ns? 160ns?

trfc normally 110ns.. if me, i will only put 160ns to gain high freq only..
keke..
might need to check with AOD also sis..encounter this few times.. but i trust AOD/cpu tweak more..
reason is because when leave like that (bios 110ns / cpu tweaker 160ns) prime stable..
change cpu tweaker to 110ns, prime fail..

so this bulldozer is due when?

kekekek.. not to mention tend to fail more compared to 1m..
if fail at loop 1 i can tolerate..if loop 23? kekeek

Quite off topic though..

But anyone know where to get Dry Ice desgined for Food/Drinks nearby KL??

Where can i find?

what proc u using again bro?

EDIT: btw here's my validator..just to share
http://valid.canardpc.com/show_oc.php?id=1362783