balikla jalan dah jam..

try these:

6-6-6 @ 1333, 1.35~1.4v
6-7-6 @ 1600, 1.5xv
7-8-7 @ 1900~1940, 1.5xv

if u can do all listed above i'm pretty sure u can hit 7-9-7 @ 1k or somewhere near there. 
if can keep it below 1.4v that would be awesome... 

bro, d cheapo eco 1333 can't do tight timing @ 1600 ish, i made a wrong statement b4, 1600 @ 7-7-7 is not prime stable iirc. 1333 @ 6-6-6 is really nothing... iirc 1600 @ 6-7-6 gives d best bandwidth in memtest...

they shine @ 1800, any higher need tonnes of tweak (volt). was dead happy 1900 was doable but it was pure luck only. tried to do 967 * 2 but no go. let's see whether it can be done after a day of memtest @ 1900. that's how i spent d cuti during hari raya. lifeless isn't it??? 

sad... cannot pass 1800MHz. i really noob. wkkwkkw...

guys, im using tuniq tx3, on my proc, using the tuniq tower 120 extreme. wanna ask, i wanna change method of applying, wanna use the pea size methed, do u think i sgud go for it(given that how f***ing hard izzit to flatten this paste using credit card, not totally sure the heatsink pressure can do the job, coz would like to try natural pressure to minimize bubbles, any suggestion?(dunwan to waste the paste tats why im askin, u noe how little u get when u buy tx3 )

whiskey? i rike chivas... 

voltage wise sir? glad to see 4GHz is attainable... users nowadays are spoil by intel, after few attempts then give up liao... 

so u still wanna sell d 95watter?  today is payday... 

Voltage is good at least not vary from previous test..

Its the spirit of keep fighting, the more tough the more interesting.. 

Let see tonight whether 4.2ghz is achievable.. If no, really lemons juice
Not much different if between 1075t and 1090t. Both are BE.

Reluctant to buy again.. Haha (English pls, I dun have dictionary  )

[attachmentid=1784738]

Updated my Bios and tried the settings above. Hopefully stable.

*Sigh.. the pc rebooted after an hour of stressing..

my bad, i have short term memory & last time i tested a thuban was a quickie, perhaps i should convince my fren to buy a thuban??     
given d no. of CHIV we have here, asus should at least have a oc gatherin or workshop for amd users. guess they're busy countin money$$$ instead of givin back... 

why??? i'm gud to guys what?  :/cry:
gud job there, keep it up...  :/thumbs:

new teka teki...  :/P



what i did to my fren's 635???  :/hmm:  :/stars:  :/lol:

guess what guys... 

[attachmentid=1787139]

owh any how.im already at month using x3 440 and board TA790GXE 128M.

with stepping cacyc ac,why i cant unlock L3 catch?btw a newest bios for this board can use bio-unlocking.im to old to try unlock another core,just heppi if can unlock L3 sudah lah...well just wanna play safe without need to touch jumper reset.

hmm....this is 4ghz stable so far....havent got time to push further yet....

OC Validation
edit: using Venomous X Black wt 2xXigmatek 12CM to get 55C max, current DK i have just crashes...due to ACBEL 510W PSU i'm having, i'm having issues with wattage and volt errors but it still maintain 4ghz during load and keep auto-dropping multiplier (I assume that thuban eats lots of power after ocing to 4ghz based on a lot of review sites / Prime95 having problems with thuban >.<, overdrive stability test for 4 hours and still no multiplier auto-drop)

lol Confirm PSU not good enough, done some research....need at least 650W to push this thuban over 4ghz >.<

EDIT: Finally got a stable HT clock/voltage/Multiplier, by the way since i'm having PSU problems, Vcore might not been set correctly and during load it reduces greatly, not to mention it underclocks during load as well....Lesson learned, don't play with thuban if you don't have over 550W with real power PSU 

ahsos vanila 890fx should be ok cosiderin their 880 younger bro did pretty ok. biostar mem oc x cukup uummmpphhh from what i heard. msi 890fx can give gud mileage but performance wise (@ same clock) not as gud as others from what i read few months back. gigabyte ok but expensive too. 

my suggestion: CHIV ftw... 

r u stayin with green camp sis? 

i think if 45W TDP proc surely safe 24/7
but if 140w..not.. that vcore also quite odd to see.. kekeke 
yeah.. dom GT right?

is it gskill pi in malaysia jus hav 1600 mhz??this ram looks like so good..hehe..

Second of that... 

Overclock with Gigabyte 890FXA-UD7.
Manage to renew my personal SuperPi score.

can any one guide me how to overclock my phenom fx5000?i'm using gigabyte ma74gm-s2 mobo, and kingston ddr2 800 ram. thanks.

nao otai2 amd change ship ah?

even intel sifu oso starting to invade amd ship liao~hehehe

yesterday try my trident d,wit 1598mhz using 7-7-7-24,not so stable but can use,if i use 7-8-7 more worst...and also 7-9-7...wat problem of that???