FAILED! Cinibench more for CPU.

Sell your dark charcol and get a Hyper. PM me.

Give you 3 choices of hyers to choose. Price is slightly expensive than ur dark charcoal.

I been searching high and low and found IT. Keep finger crossed.

This post has been edited by louislkw: Oct 7 2010, 09:10 AM

arghhh.... okie, looks like d eco is destined to die on me... i'll try my bestest then...

sms'ed u ledi regardin d hypers...

Erkkkk ni sapa yg retired nih...
Good luck bro..

any one knoe why my friend pc hang after unlocking 2 cores
BTW
he use PII X2 555BE

Maybe the unlocked cores are unstable? Have u tried with different ECC values?

myb the power supply
coz it use only 400w chapalang 1

what is the pc spec?

finally i'm can hit 3.0Ghz for my cheapo Athlon X2 5000+...last time i'm stuck at 2.6Ghz...actually my RAM can go too much..after replace with performance RAM..it's can be go more than 3.3Ghz but i'm not really go to much and worried about temp due to i'm just using Cooler Master HTX3 only...

yea, my ram also prevent me clock higher.
you have nice chips there,
3ghz at 1.296v.

is this ok guys

i donno whether my vcore is too high or not?

This post has been edited by lat_lonelyboyz: Oct 8 2010, 04:29 AM


Attached thumbnail(s)

It looks very high to me..at leat..mine at 3.5Ghz only require 1.32V..
Even if batch problems at least should not >1.4v

Reduce it unless you want push it further..

but..stock X3 720 around 1.3v right?
so what about run @3.5GHz and unlock to X4??
no need to op its vcore? must still 1.32v?

*using Hyper n520 cooler now. donno how max GHz it can handle

This post has been edited by lat_lonelyboyz: Oct 10 2010, 09:39 PM

You never know if you dont tried..why not try 1.35V first and see if its stable..

If you notice almost all AMD proc stock vCore around 1.3~.137V..
be it 2 core,3 core or 4 core or 6 core

This post has been edited by AMDAthlon: Oct 8 2010, 08:37 AM

orait boss. will try it later and do some stress job for my X3 720

i had noticed before that Phenom II just around 1.3~1.37v even up to X6

btw, can u suggest/teach me..how to push up to 4GHz? tried before and failed to boot

Before proceeding..i think you should read guide on first page first
You need to know some basics

oh...sorry.
didnt noticed before anyway, thx bro coz gimme some useful advise here.

@lat
if u have a perfectly healthy 4th core, <1.4 is possible..if not.. that is ok also..
depends on the core.. i have a bad 555Be that only able to unlock 3core and need 1.42vcore to make it stable.. it depends on luck after all

and iinm, back then 720 not clocking so well..around 3.6ghz only.. i donno about newer batch..

using c4f yesterday..but oc ram until 4.0 wit ram freq 1960 cant booting,what problem a??

what divider u used? for > 19xx, 1600 is d only way to go, in my case at least...

let me go back and see..i jus knw when my bus speed is 275,my dram is arn 1800++...but when i oc like u post ...bus 250,multiplier 14,dram 2000++ can boot up..