if can find cheap c3, it wont hurt much..

great.. i dont think here will have sempron 145..
is cheapest ever c3 proc..kekeke..


btw

updated with better vdimm

This post has been edited by kuntawakaw: Sep 4 2010, 03:49 PM

well.. i play experiment with the drive strength..
but cant use high vdimm..
1.7 fail within 1min.. 1.65 around 20mins and fail.. 1.56 stable up to 50mins but i stop the worker.. not fail yet..

so i kindda happy.. kekeke.. sir antonio said drive strength increase can kill the ram esp when increase vdimm..
but now low vdimm..so the ram most probably wil survive..gonna try to ECO later on..

is 1.65 as per turbo V
u bench with high vcore..ofkos like that..
change bodoh proc with lower power consumption and bodoh GC..
underclock and undervolt..
and stress ram kaw2..kekeke..

btw..
passed 1st 20mins..wish me luck

pass 1hr..i let it prime more..but suddenly whole house black out..
my mom flip the main switch..cuz no one answer her when she yelling downstairs

here..new result with better timings.. done last night before sleep..so able to prime around 30mins only..

wall edi with 7-9-7..tonnes of tweak done to make it stable..

will be naiser under other's hand..
note that these are single sided 1gb stick.. 2gb sticks with bdbg is nowhere to found..even 2nd hand in GS

ya..abang otromen being too humble.. and holding too much..
isnt that sir louis able to run the flare on 2k? flare using powerchip right?

micron kindda famous at early stage of ddr3..now quiet edi
ask ur fren to loan u kejap la..kekeke.. since u in SGP..no one here except sir louis able to do that.. kekeke

@louis.. cex bringing to malaysia.. 30sept..
the price is 1.4k

@verdict..
i have no idea about the drive strength
at 1st.. i was unable to push more than 850mhz..
so experimenting with drive strength.. found the one that able to improve clock..make it stronger..

so able to pass up to 910mhz..but.. now.. i just lower down it back to default value..still able to prime 1hr..

and my sticks gone weird..
let say.
1.7vdimm bsod/freeze
1.68vdimm fail 1min
1.609vdimm fail at 18mins
1.54 vdimm pass 1hr prime
(well..not happen in this attempt only..also happend in 800mhz 7-8-7 attempt and any other.. )

here some a weird proof
is the vdimm correct or mobo gone weird.

if google around..it will be the CKE and mclck drive strength..
cke give nothing to me..
memclk will boost stability if use higher dvider..but... default already max
so i tried the adress/cmd.. google said will increase stability is use tighter timing.. so this is the one that giving me the most impact..

but...as sir antonio said, increasing drive strength is more risky compared to increase vdimm..and even riskier if increase both..kekeke
edit : so better use ur test kit aka kvr 1st bro..kekeke.. i stil have 1 day from 1 week 1-to-1..that is y i dare to increase this and that..

i might be wrong tho with all these info..pls correct me if im wrong



This post has been edited by kuntawakaw: Sep 7 2010, 02:41 AM

@ah khoo
what was great.. 1.515v 1800mhz 7-8-7
i need 1.575v to make it primeable..

just primed for 20mins.. not sure pass 1hr mark or not..
and my other timings lose to yours..kekekek

@zerohunter.
considering ur mobo..yes..can
but the temp (max at 57c) is almost hit the max recommended temp..

u might need better cooler to push more..

if for fun stable OC, just hit it..until 1.55v also can..
but for daily usage.. i dont think its a good idea..

only 1 day switch back to ECO.. with all the chores, i cant tweak alot..currently need to find lowest vdimm possible for 1800mhz 7-8-7
its quite
cant pour excess volt..

@alan kc
i think ah khoo and sir louis stressed enough edi.. on how high BBSE,hypers and ect can go.. u can always google.. if u want to know diff result..

and for the IC..refer here.. they are not a walking library that will find every ram's ICs for u..
http://i4memory.com/f94/ddr3-ic-list-submissions-8426/

u using 4sticks? if not.. just let it be..
me also cant select it.. donno y and dont even bother...

if A channel i think the slot 1 and 2. (it depends on mobo..some 1 and 2..some 1 and 3)
channel B is for slot 3 and 4..

unker..im amazed.. im trying to run low volt just like ur prev setting 1800mhz 7-8-7 1.515v..but nowhere near that.. now stuck with 1.575.. too much differ

is gskill eco bro.. come geddit..kekeke

come change wit me

i sense someone going to dom GT
btw ah khoo.. ur ram is lower freq eco right? u think the same PCS chip used?
care to share the setting?
for 1800mhz... tightest timing u had
LLC? drive strength? i having hard time here

dom gt too expensive? i wonder what the "UGPM" contains

well..copied ur VDDA setting.. improves the prime time..for few mins..but.. i currently OC the ram..the vdda is not CPU isnt it?
anything u change under the mem controller? the tab where ECC,tristate,hole remapping and ect ect?

i wish i have a good hand like u unker..
tried with crippled propus (440 x3) no luck.. no improvement..

This post has been edited by kuntawakaw: Sep 13 2010, 11:41 PM

if u serious in superpi-ing..use the superpi mod then
http://www.techpowerup.com/downloads/366/s...pi_mod_v1.5.htm
and tweak ur OS to get better result.. for info, google superpi tweak

btw that s quite good edi.. keep it up dude..

This post has been edited by kuntawakaw: Sep 13 2010, 11:50 PM

vIMC is 1.45v as bios
this is my main OS..so no turboV installed..no AMD..no nothing..kekek

been tired of tweaking the Eco..going nowhere..will try push more but due to non-BE..having hard time proceed from here..kekee

@ah khoo..
i think for thuban, 3ghz imc is normal for <1.3v..correct me if im wrong..

@sanko
that board selling locally now?