ram i knew.some ram/mobo/both combo not like some divider.. .
but CPU multi kindda new to me.. i just encounterd once.. 5 min reboot in 13.5x but 1hr prime stable in 13x..
huge stability different..

anyway..thanks sis.. update result of ur ram faster..

IINM DK FXB didn't like multi with .5x behind...

it happen to me before... it start from 13.5x till lower multi and it causing me headache...

This post has been edited by verdict: Aug 21 2010, 01:30 PM

ok..got it..
last time (years ago) xixo did said.. dont use .5x multi..but his reason is superpi giving worse score with that.. not saying about stability..

btw..thanks sis.. lub u

*cough*
I did test previously.
same clock speed. different multi and HTT combination, some required more volt... need to look further.. that's the moment you need to enjoy while ocing.

about fail, not sure.. because they dependent on each other (micro factor) electrical stuff always like that..

1st of all i want to break Dura-Ace record on 32M on last submission...

then oni proceed with other stuff...

how bout 1840 bro? what's d juice needed for such freq @ 7-8-7? u can push ya nb freq is a'lil higher, i believe it'll be just fine w/o d need of more juice. why 2t is used while it can do 1t just fine? have u tried diff ram slots? my fren's team dark won't do 1800 prime stable on further slots...

more like d imc/ram doesn't like certain divider to me... it happens all d time... usually i have less luck w highest ram divider...

hard to get best setting for pi32m...damn hard...

summore all the item are in the casing...

unker/cloudwan wanna change ram with me for testing purpose?

This post has been edited by verdict: Aug 21 2010, 05:52 PM

update my bios this afternoon. so, i decided to test my proc stability. done prime95 for one hour. i forgot to install easytune, so didnt know the exact temp.



i see u guys also OC ram. is there a big difference when u set the timing tighter?
my ram rated CL7 : 7-7-7-21. should i set it to that value or let it be auto?

if capable of tight timing.. just set it la..
sometimes by auto, bios change and loosen the timing..

bro, still cannot ah, i moved the rams to the 1st & 3rd slot but still cannot , only this time atleast can prime for a few minutes
Got anymore ideas?

Here's a SS of my setting right now:

id say that a hell of different...
at least CL9 is ok.. really2 rare for ppl to set CL11 @1600mhz..

@cludwan..

go go go!
(just change the "8tvt" to "cloudwan" and u good to go )

This post has been edited by kuntawakaw: Aug 21 2010, 09:35 PM

Yup CL11 is too high for me, must atleast CL9 mah

Wei u x takut bro 8tvt saman u copyright infringement ka?
Thanx bro, i will try my best, saya janji akan belajar rajin2.. hahahaha

---

Added on August 21, 2010, 9:45 pmChange ram meh? hmmm let me play2 1st, haven't puas rape it yet

This post has been edited by cloudwan: Aug 21 2010, 09:45 PM

htt volt & nb volt @ stock? u mite wanna consider givin 'em a bit of boost... there's no harm especially vhtt... start from 1800 @ 7-8-7 then slowly increase from there bro... 1866 @ cas 7 rite away mite be a bit hard for d imc/board to swallow...

agree with you unker...

my one also hard to tame at this moment...think should get ripjaws or trident in future...that will cost lot of damage to my pocket...

G SKILL TRIDENT DDR3-2133 PC3 17066 4GB KIT ([TDS] F3-17066CL9D-4GBTDS ) = RM589 im dying!!!

This post has been edited by verdict: Aug 22 2010, 05:20 PM

Wahlau, that price, i don't think i'm gonna buy any ram with that price, the one i have is already considered expensive to me lagi plak RM699

u just need sometimes to get used to it sis, com'on, u just had it for a day or 2 so dun be too hard on yaself... which model ur havin sctually, mind 2 share?

w/ that kinda price i'd rather go for those confirmed w/ hypers, like super talent or dom gt...

yalor, to think that a pair of ram cost more than a decent board... hp ram sure a luxury toy to have nowadays...

any progress bro? mind to include cpu-tweaker in ya ss as well? or... can i virtually borrow ya rig for a while by usin log me in?

This post has been edited by ah_khoo: Aug 22 2010, 03:06 PM

Mine is [ PI ] F3-12800CL6D-4GBPI G.Skill PI 4GB DDR3 1600MHz 1.6V (6-8-6-24)

CORRECTED but still painfull!!!

G SKILL TRIDENT DDR3-2133 PC3 17066 4GB KIT ([TDS] F3-17066CL9D-4GBTDS ) = RM589

beside dom gt and super talent,what hp ram can find in SLS?

This post has been edited by verdict: Aug 22 2010, 05:25 PM

i think yas should be of psc chippies sis, capable of high freq but @ x-x+1or2-x... 6-7-6 @ 16xx still manageable, any higher u need to go w/ 7-8-7 or even 7-9-7... gskill flares are runnin on same kinda chippies iianm...

not so sure bout trident thou... just a wild guess... they mite be runnin on bbse...

super talent not available in sls sis, u gotta import it from d states...

This post has been edited by ah_khoo: Aug 22 2010, 05:55 PM

Hi. Whats the best daily oc for 1055T. Is it worth while to get 1090T or 1055T.

I normally use the mobo auto oc and it still can use the power saving features.

It depends on ur cooling system i believe, if u want 4ghz 24/7 also can like our bro CV6149 is doing but then again he's on WC
If it's me i would say 3.5ghz~3.6ghz is quite nice already for 24/7 but for bench 4ghz all the way

Between 1090T & 1055T, i'm really unsure, with 1055T ur stuck with only HTT oc but with the BE u get best of both worlds
Are u in a hurry to get one bro? How about waiting for the 1075T? Its a BE but cheaper than 1090T

---

Added on August 22, 2010, 10:34 pmBro trial after trial met with unsuccessful tries, here's my latest setting:



Demm trying to run the ram's at 1800mhz on 7-8-7 timings is really


This post has been edited by cloudwan: Aug 22 2010, 10:34 PM