that depends on how u define high end, > RM500, > RM750 or near to RM1k?

a decent board not necessarily costly, but not havin a decent board could mean average/poor ram mileage (i consider u njoy tweakin ram more than chip). havin a decent board is like ownin a gud car, u mite drive it @ normal speed most of d time but u can drive as fast as u want (well, obviously not as fast as premium cars) when u have d "urge". 

any 955be users here? i need to know wat max temp for it..my friend using tx3 hsf and 2-3min in prime95 already reach 68 degree.. i know lot threads recommend not more than 62 degree..how my friend case?

he he he...wait haaa...let me play-play first... :/sweat:

abang oltromen ada barang baru also...extra HDD for prawn...nyumm nyumm... :/drool:

that depends on how u define high end, > RM500, > RM750 or near to RM1k?

a decent board not necessarily costly, but not havin a decent board could mean average/poor ram mileage (i consider u njoy tweakin ram more than chip). havin a decent board is like ownin a gud car, u mite drive it @ normal speed most of d time but u can drive as fast as u want (well, obviously not as fast as premium cars) when u have d "urge".  :/P
for a start i demand a 1600 @ 6-6-6... com'on sis... it's about time for u to ditch d 790fx & embrace 890fx...  :/hehe:

no wonder abg otromen can't concentrate on his oc, ruper2 nyer got new prawn farm...  :/furious:

500gb f3 :/wub:
Today you go to get ram aite? :/w

already have...now with hilmi...ngek ngek ngek...

buka puasa with him...today i cabut early from client place after dismount a server from an old rack.... ;/)Orang jahat!!! bang oltromen tolong fire... :/respect:

if daily usage.. stick 1.4v and below.. that should safe

i mean he didnt oc..still at 3.2ghz stock speed..but the full load temp is 68c where i feel worry for him..max temp is 75c? or 70?

what the vcore there? sometimes the "Auto" will messed up the vcore..depends on board..
btw u shud know tx3 is not good enough..another solution..undervolt.. i think reduce 0.05v is not a problem..

1.35..default.ya, i know tx3 is not good enough..will trying reduce vcore.

ah_khoo, whacking 1.71v to RAM still causes worker failures & memtest error

My settings:
cpu volt: 1.35v
cpu-nb: auto
bus speed: 279mhz
cpu mul: 11x
cpu mhz: 3079mhz
htt mhz: 1959mhz
nb mhz: 1959mhz
ram volt: 1.7125v
ram div: 3:10 (1333)
ram mhz: 1866mhz
timings: 27-7-8-7 2T

Got any ideas?

Ouch...certain BBSE luv higher volts bro...now you running at what speed?

my new biatch didt like higher volts...1.6v doing 1600 cl6-7-6 oni...this ram design for pi purpose lor...

Ouch...certain BBSE luv higher volts bro...now you running at what speed?

my new biatch didt like higher volts...1.6v doing 1600 cl6-7-6 oni...this ram design for pi purpose lor...

any 955be users here? i need to know wat max temp for it..my friend using tx3 hsf and 2-3min in prime95 already reach 68 degree.. i know lot threads recommend not more than 62 degree..how my friend case?

he is using the stock cooler HSF ryte?

Right now just running back at a safe & manageable speed of 1724 cl8-8-8 at 1.65v.. Will have another go at it after work today 

Yeahh!!! go for it bro...as i also almost give up this early morning...

now wanna go TMNUT check about their Unifi thing~

Hmmmm i kinda have the feeling that this Geil dislike high speed + low latency combo, when low speed + low latency or high speed + high latency ok plak

u did try copy ah khoo's setting? include subtiming..
higher divider no good also bro?

hey2 sifu..
if there such thing that proc dont like certain multi?
i thought intel only got.. i just realize it now..