Time???
Date???
Venue???

---

Added on October 13, 2010, 8:50 amDun nid fan.... Drive fast2 enuf edi

This post has been edited by rozz_1291: Oct 13 2010, 08:50 AM

u organize the TT la, u set the time, date and venue...hehe

Hi guys...

Wana ask bout our saga smoked tail lights...

Where can i get it at the kl/setapak area?? How much does it usually cost to get it smoked??

My car is the orange saga with the square tail lights...

find acc shop
some got do
dunno how much

guys,,what is the best center bullet for our car..straight or swirl..now pening adi coz go to one shop they recommend swirl and the other shop vice versa
..currently setup..s-flow muffler only. .

swirl = more restristion = better fc , better low to mid power , quiter , not so good at high rpm
straight = opposite lo

but u use s flow , u wan use straight olso can


later i wan gun straight through
from extractor till tail tip nothing between

This post has been edited by sinister_sid: Oct 13 2010, 09:21 PM

normal accessories shop also can do it, setapak got alot mah...i also setapak kaki leh

---

Added on October 13, 2010, 10:12 pmall depends on ur car setup i m currently using swirl mid box and s-flow muffler coz i like it quiet

This post has been edited by yewwing: Oct 13 2010, 10:12 PM

haha ok3..lolz..then u car will sound like super ah beng muffler...

ah beng nevermind
scared jpj and polis onli

hahaha..polis can hulur duit kopi but jpj ..zzzzzzzzz

jpj
that day my company lorry a little overweight
3 keping purple colour 1

use stocks only...

stock but gti 1

just saw this at mudah.com
dcoe 40 rm1300
sayang this month kosong d



This post has been edited by sinister_sid: Oct 13 2010, 10:52 PM


Attached thumbnail(s)

no laa....to over lehh

Pls avoid using those so-called swirling bullets. To me its bullsheet. The whole point of putting a center bullet/box/resonator is to resonate the sound and vibration cause from the cylinder detonation. It acts more like a sponge or dampener around the piping.

Those swirling dimples inside the bullet will cause more restriction to ur exhaust gases flow compare to stock setup.

I would recommend u to use back ur stock size piping+mandrel bend tuned length extractor+bullet/resonator (if u 1 it to be more silence) and a suitable rear muffler (inlet<2", outlet<3") maybe??? Following ur liking.

using back stock piping is to keep the heat inside the piping for a better and smoother flow (unless ur running on Fi)

sifoo dah bersuara..better use stock.......

all hail sifoo.. ..haha..