@izdihar88 ,

Nice rig bro....can open the case see see ~ ^^"

I thought you already post before right in the previous version of topic?

nice casing 

mine just minor mod on storm scout only, change all fans to blue LED and did some cutting.
lack of tools so just cut with wire cutter and those wire management holes very ugly. 

@izdihar88 ,

Yup the inside of your case.

the only improvement can make is re-cut the hole with tools that I made.

by the way, I'm going to change my casing later. 

your interior very neat and tidy.

just changed to silverstone raven 02 but now having a big trouble with the cable management, some of the wires too short.
not much people using it, I can't find any guide to manage cable yet have to figure it out by myself so far.

for the storm scout, I'll just sell it as set or separately as spare parts.
if no body want, may be I'll use the thumb screws and some parts of it to my new casing. 

psu sata cable short, have to buy longer wire and replace back with all the plug and sleeve it but I'm not familiar with that.
no lor, may be just little mod to the hard disk bay and replace the pci slot with thumb screw. stock is normal screw.

I'm from Penang.

hahaha... not going to cut, no place for me to cut also. if can cut also cut the fins and make it look like alienware casing.. 

I'm using Seasonic X750.

ya.. 3x1 3x1 2x1..
only one 3x1 long enough to reach my hdd bay, another 3x1 left two plug can be use. then 2x1 totally cannot reach dvd-rw.

i also use usp 100..but it still under painting work..

before..
[attachmentid=1647119]

now...
[attachmentid=1647121]

to b cont.....

USP 100 Black user here yay

u r the king of USP100. 

intead of using acrylic,i will use glass for my side panel..already buy it..guess what,it cost only rm 4..hehe..acrylic cost around rm30- 40 at penang..

here my casing.almost done..

finish panting
[attachmentid=1650700]

finish riveting
[attachmentid=1650702]

my front panel
[attachmentid=1650703]
im using flat black and fluorecent green..so plan to put uv light inside there..

Wow look cool USP 100 Black, my hp  camera more sux than yours, atleast ur picture look more clearer than mine

guys any 1 of u using logitech nano mouse receiver on ur cooler master casing? i found there r some problem for the receiver to get the frequency = lag in mouse movement if i plug my receiver at the rear of my case

Yes i will bro hehe. But i dont have a talent to mod on my own. Any shop can offer this service in KL?

i tot all amd board is like that