my dad suddenly told me 2 go NBH do change block, cam, carb and ignition coil. he say loan 10k too much burden pula after recalculating.

the problem is my dad don't want pay dp just loan from bank with low interest. than pay cash 4 new bike.


coz my dad suddenly change his mindset after recalculating the loan & others misc. not short term also coz my dad maybe use it when i buy the new bike in future 4 his own loading of its business kicap.

This post has been edited by 8zelk8: Aug 15 2010, 10:22 PM

now hor i take all 10k loan nia, he don't loan liao. i take full loan of 10k from bank. he always change his mindset after recalculating many times.

tell u 1 thing, my dad hv lots of installment things need 2 pay monthly. if add this loan, will be lots of burden if i 1 month can't pay it.

loan 4 bike. buy naked bike. YMH FZ150i.

tmr going NBH asking the price sin with more engine detail to par with an stock lc.

er6f oo superbike look right. but if play corner really hard coz need do like track eh style. bend ur knees till hentam the ground.



this is C&g posted at v4 post #100


my suggestion:
1. 54mm piston and block set. >>on the way
2. 24mm uma racing carburetor >>on the way
3. custom EX5 cam >>on the way
4. custom exhaust manifold (Done)
5. 14-35 sprocket size 415. (consider on next time changing)
6. NGK G-power spark plug (Done)
7. Racing ignition coil >>on the way
8. Spark plug booster (stromberg) (Done)

no need to change CDI, original is good enough.

you can change item 6, 7 and 8 first.
next up will be custom EX5 camshaft and manifold.

Item 1 and 2 need to change in one shot to get good matching. change one by one very weird one the feeling.

These mods are good for mid range torque (which is important for hill climb), top end power (for drag use) i put it aside.


This post has been edited by 8zelk8: Aug 15 2010, 11:30 PM

tht's mean they play with lots of tuning. so whos tank the refill the most out of it.

means ur cdi really kill ur bike. no mod = less power.

This post has been edited by 8zelk8: Aug 15 2010, 11:54 PM

tht's mean their tuning is 4 more power yet safe fc.

hoho means tht BM power really rocks in tuning bike.

hoho tht's mean the pro go somewhere liao right

if the pro still doing mod 4 pipe, u can go 4 it.

i know tht mall very old de, now beside it hv build a new fly over.

if hv time & $$, ask them mod an pipe 4 u in the shop tht u change ur thing at mainland de.

tht place now only i know tht shop at there. btw Bm i only go 4 about a few times nia. coz my mom eh sister live in tht area also.

if u really hv $$ & time, try ask ur rgv frenz ask them out do ur pipe mod.

normal stock is like tht all been restricted. once mod it all unleashed.

This post has been edited by 8zelk8: Aug 16 2010, 12:37 AM

4 ur info, lc is much more power than lagenda due to its bike cc. lc=135cc lagenda=115cc. so far if not mod or anything. if example ; like didn't take care or maintaince it well, the bike can worn out fast.


this the comment by Charge & go

The engine dimension looks like a downgraded 135LC (see the stroke size). This is an undersquare engine, low to mid range is good, but high rpm power sux. I still prefer the old 110cc, at least the engine dimension allows it to rev higher.

The gear box is exactly the same as 135LC (check the gear ratio), only the final sprocket size is different. Lagenda is using 15-43, while LC using 15-39.



and check this:
New
Maximum Power 6.0 kW/7500r/min
Maximum Torque 8.3 N.m/5500 r/min

Old
Maximum Power = 6.6 kW @ 8000 rpm
Maximum Torque = 9.0 N.m @ 5000 rpm

Seriously, I and
New lagenda SUX

I've tried undersquare, square and oversquare engine before. undersquare is good for rider who revs low. Power delivery from mid-high rpm onwards sux. Original 135LC is undersquare engine, and this new Lagenda is more undersquare.

See those race cars and race bike engine, all of them are over-square.

On the square square thingy.

Undersquare means, bore diameter is smaller than stroke length.
Square means, bore diameter is similar to stroke length.
Oversquare means, bore diameter is bigger than stroke length.

with the same engine size, undersquare engine has more torque than oversquare engine at lower rpm, but lacks power at mid to high rpm.

See the Toyota, Honda or Nissan road car, the stroke is always longer and the bore (piston diameter) is always smaller. Even my kelisa also like this. It provides good torque at low rpm (hence save petrol).

Race car needs horsepower, and hardly will run the race engine below 3krpm. That's why oversquare is better.

Square? It's a balance of torque and horsepower. 135LC with 58.5mm piston or 60mm piston is a square engine configuration. I personally like square engine bcoz I can get good low to high rpm power, as long as the tuning is done correctly.

This post has been edited by 8zelk8: Aug 16 2010, 12:47 AM

2day stay at NBH shop 4 6 hours. BH say 2 me it'll cos about Rm600++. futhermore, NBH place got the new lagenda 115 eh side mirror. It's more chio than 125 eh side mirror & koso mirror.

Rm 600++ means if my block still can rebore 2 51mm with uma racing valve, TS carb, custom ex5 cam by NBH. got 1 more option, racing block with japan valve, Ts carb, custom ex5 cam by NBH(the price hvn't ask coz he place now no ah pek liao. ah pek go others place jor, left the indian guy & BH do things nia)

im changing to bigger bore = bigger power at torque. i not an top speed kia but an torque guy.

u study at kampar uni izit??

---

Added on August 16, 2010, 6:30 pmhe say can't pawn lc la coz only 51mm. not 55mm or 56mm.

This post has been edited by 8zelk8: Aug 16 2010, 06:30 PM

indian guy steam coz he only talk much with his own kind nia. if don't want boring chat with tauke wife.

---

Added on August 16, 2010, 6:44 pmhv to c my interview lor of part time job. coz till now no call at all. so solution was my dad say 2 me this the last time mod ur things. tht's y now aim 4 power tht even can ta pau stock fz150i or stock lc.


oh yeah just now tauke wife recommend me Rock Oil EO 10W40 cost around Rm76 per bottle, it's fully synthetic.


Rockoil My Page

This post has been edited by 8zelk8: Aug 16 2010, 06:49 PM

do u know wht is self work & earn money to pay it. is call i use my dad name to loan the bank & i pay the monthly installment.

oh ic, so we also an independent ppl tht using dad name as monthly installment since we don't hv a true job yet.

import from UK