ya, it's straight, perfectly fit but still crack. It was still okay in the beginning, but after running, it cracked.

lol. i dunno then. u using washers ? i never cracked the screw hole before even when using old chasis. break the whole nose completely alot of times but never just teh screw hole. haha

lol me too

yaya, i used washer of course, but it still cracked.
My ms and super x chassis are fine.
But it cracked after i achieve 19 seconds yesterday, haha, so i think it's fine...

aww... now i`ll have nightmares... oh wait nvm ....



you all say the car fly out or ?



doing now . lol

wah i like the colour of the shoes.. hahaha

---

Added on August 11, 2010, 1:50 ammatches the super xx chasis blue.. lol

This post has been edited by lolhalol: Aug 11 2010, 01:50 AM

Isit time for Team Enjoice for one last round of Enjoicing this Sunday?

Guys...I'm just wondering, why did (almost) all of you using large dia wheel with a super speed gears ? (and not only in this forum, almost all jap's racers also use this kind of setting)

I've been reading some of tamiya's guideline about that, which with those kind of combination it's not only "torturing" the motor it also drains the battery...

Since its all for racing and only time attack, to gain the maximum speed = large diameter tires + super speed gear ratio. Torture motor yes, but since motor is not that expensive, as well as money is speed and speed is money, it's worth doing it, race and throw motor after race.

but not everyone can do that what ....

guys....im really confused about usage of cleaner spray...i thought it was for lubricant....but after i use....d bearing (mine is 13mm) become little bit rough when spinning (about 1 second)....when i touched it forward n backwsard,i can feel d roughness...but not smoothness....

so wat's d solution?

which cleaner spray? ELKAY or TAMIYA one?
as that thing is CLEANER..so it used for cleaning..unless it was stated at the bottle as LUBRICANT.

ok like this, get a small container/bottle. put your rusty/dirty bearings in it. then spray some cleaner. close the container, then shake2.
u'll see some dirt comes away and cleaner become darker.

take out, let it dries on the tissue.

if your 13mm bearing still rough, maybe the nuts inside dh rosak. buy a new one. TQ

This post has been edited by -=conselfa=-: Aug 11 2010, 04:08 PM

tamiya one....ic....thanks for d info...

any lubricant can be used in bearing actually...?since i saw d notice in TU stating dat NO OIL SPRAY ALLOWED...which means grease and oil are prohibited??

normally we just clean up the rollers+bearings n let it dust-free..so it can spin smoothly .bcoz tamiya RC cleaner and elkay is not oil based, so it is allowed at TU for rempit n during race. some type of cleaners are oil based, so it can caused track+other cars dirty n collectiing dust. dat kind of cleaners are BANNED.

to all Muslims who fasting today, SLAMAT BERBUKA PUASA.
lets go buy food at bazar!!! hehehe

Happy Fasting !!!

This post has been edited by Beans: Sep 5 2010, 02:35 AM

watching lets and gooooooooooooooooooooooo.. hahaa

you can lube your bearing and parts, but make sure your car and parts are clean and oil won't split out to the track....

no oily spray allowed since oily spray is hard to control ppl always overuse it, and normally ppl spray and go, did't take care the track, so organizer forced to prohibit the oily spray...

stains caused by oily spray is hard to remove, whether it's only the track or on the flow.

oh.....icic....thanks both of u.....

to all malays:selamat berpuasa

HiHi, the front part of my vs chassis setting is something likes yours but different in bearings la. (you can refer to the photo I posted above)
It just CRACKED like that...haixx.
Is yours okay after winning the 2nd place?

This post has been edited by Beans: Aug 11 2010, 07:20 PM