This post has been edited by skng03: Jun 25 2011, 08:37 PM

for analog camera, use RG-59 or twist pair wire ( tel / cat 5 cable) from camera signal to your DVR location, point to point.
for IP / megapixel camera,use cat 5/6, P to P.

camera power supply can be normal 13A S/S/O near the camera point or use any 2 core for D.C supply (normally 12V) from cam point to your DVR location, adapter install nearby the DVR.

if u r not sure what cam to use then install cat5/6 cable for the cam signal & use video balun to connect( if analog cam is use) signal tru the data cable.

Some LINK for info & to check on CCTV prices

This post has been edited by skng03: Jul 24 2010, 08:15 PM

As long your isp speed r fast enough & your internet acc is unlimited usage, my area only Streamyx can fulfill my requirement

ip camera or analog camera both can monitor tru internet, with DVR card & software ( PC base DVR).

standalone DVR with network port also can view tru internet.

all signal cable (RG59/ Cat5e/ cat6/ tel twist pair wire) & power supply are POINT TO POINT, still need diagram

if u lay Cat5/6 cable, will allow u to select ip cam/ analog cam later

its not LED but IR....infrared for night vision

Ip cam can be analog cam, CCD or CMOS with lan connection.
Megapixel cam is digital.

Normal analog cam can connect Via Cat5/6/ any twist pair cable with video balun

their shop at jalan pasar one right, but price wise

This post has been edited by skng03: Oct 7 2010, 04:14 PM