Custom Handcrafted Clean Regulated Pedal Power Supply


******* NEWS FLASH ********
19th May 2012

• Now collecting users testimonial about 9x00 mk2 (why didn't I think about this earlier? bzzzt!) [/*]
• development of MK3 (hopefully final) version is now in motion[/*]

11th Feb 2012

• Now shipping MK 2 version of 9x00. Smaller, tougher chassis made from thicker aluminum and uses 2.0 pcb. AC support dropped temporary [/*]
• Existing user wanted to upgrade their chassis to the new thick aluminum chassis can cantact me[/*]

24th September 2011

• I'm trying to setup a small fun gallery of all board that uses my power unit. Do you use one?. Dont be shy, snap 1 and mail it to me/ or give me link or whatever. The gallery is here HERE

5th July 2011

• Trade in your stuff (guitar, pedal, electronic etc) with my power supply. Offer me. I might be interested
• Reseller wanted. Contact me

********************************[/color]

Overview:
-Clean, safe, linear REGULATED voltage
-Circuit build on original printed circuit board
-Fused & short circuit protection.
-Standard center -ve (negative) for Boss/Behringer pedal and can be made to power Line 6 modeller /EHX style etc2. Please ask!
-Come with easy Standard IEC socket with 1 meter or optional extra length 3-5 meter main power cable.
-Hand crafted tin metal chassis, painted with 'handsome' black or any colour.
-Bright power indicator LED now with easy access ON/OFF switch
-Multi out DC voltage discuss with me if you need extra.)
-18 inch DC connector included
-Every build quality assured with 1 year limited warranty (please keep your PostLaju slip for your reference)

Model/Pricing:


Sorry about the low Q nokia phone picture. I haven't fix my camera yet


Standard are black & bare aluminum. Other color available at very little extra cost
Model : 9X00 MK2

• RM200
• 800mA total current output (please ask if more needed)
• 8 x 9v regulated DC current (uses improved 2.0 PCB)
• 8 straight DC cable with 2.1mm plug (12 - 18 inch each)
• 1.2meter Power cable
• Improved 0.8mm thick Aluminum chassis should witstand rough eviroment
• 12cm wide / 9cm deep / 4.5cm height (about the same size as PP2+)
• Popular model+ Super value!

Model : 9500 MK2

• RM160
• 500mA total current output (please ask if more needed)
• 5 x 9v regulated DC current (uses improved 2.0 PCB)
• 5 straight DC cable with 2.1mm plug (12 - 18 inch each)
• 1.2meter Power cable
• Improved 0.8mm thick Aluminum chassis should witstand rough eviroment
• 12cm wide / 9cm deep / 4.5cm height (about the same size as PP2+)
• For smaller board

Add on

• 12V DC/18V DC: RM30 each
• Add on output socket with DC cable: RM10 each
• Electro Harmonix style plug: RM2
• 2.5mm Plug for Line 6 Modeller : RM2

[/list]FAQ - answers

1. Yes i hand build this myself because branded power supply cost too much (to me). Also help other who don't like to get their hand dirty in electronics but want a small, simple regulated PS for their pedal board
2. I normally ask for 7 days to complete an order because of the paint job and I usually double check everything before post it to you plus I only do this part time. It all depending on my free time. Some order may take as long as 14 day to finish due to my other life commitment. My fastest record time are 3 days. But I ensure you I am very committed to finish every order I take like I have promised. I have 2 years of clean record. ask around
3. No, call / sms me everyday will not speed up the process
4. You can test it by coming to my "super tiny little micro halus ciput" studio in Ipoh.
5. You are required to bank in half of the agreed total price as deposit and another half just before I post the item. But everyone seems like to skip the hassle and bank in full amount. Its totally up to you
6. Yes I can build you super customized one but with little extra charge of course. Please ask
7. Trade? Offer me. I'm also a guitar player (but not a good one hahah ) and a pedal lover... I might be interested
8. Friendship are always welcomed

Contact:
Dream Project Studio
c11, Pasar Besar Ipoh
Jln Onn Jaafar
30300 Ipoh Perak
Mr Faizal Tel: 017-3917518 (10am-10pm) or PM/WhatApps me
(Please take note that the studio is open ON APPOINTMENT ONLY)

What users say about their 9x00MK2?

"That is a good size, and no noise at all" - Ben (Putrajaya)

"Yang buat aku impress... clean... takda buzzing... terbaik!" - Safrul Izham (Puchong)

What Dream Project Studio do beside making PS?:
⊗ Audio Recording/Tracking
⊗ Mixing
⊗ Mastering
⊗ Back-line Renting
⊗ PA Systems Renting Service
⊗ Art Product Distributor
⊗ CD / DVD Duplication Service
⊗ Web Development
⊗ Multimedia Content Creations
⊗ Guitar Effect Pedal Custom Power Supply Builder
⊗ Guitar Servicing (Rewiring/Intonation etc)
⊗ Guitar Effect Pedal & Amplifier Service/Repair

FOR PRODUCT IMAGE PLEASE FOLLOW THIS LINK
http://www.facebook.com/DreamProjectStudio?sk=photos

OTHERS:

Patch cable
SORRY TEMPORARILY OUT OF STOCK!

Flat head right-angled patch cable (space saver) (comparable to Switchcraft one but it's not)
Using Quality, Low Resistance Audio Grade cable
Custom length available
Price:
6 inch RM8
12 inch RM12
18 inch RM16
24 inch RM20
postage RM8 for every 500grm (POS LAJU)


Custom Length MIDI Cable

Specify your length
Using High Quality CAT5 Cable or other cable you requested.
Price:
First 2 meter RM15. Add RM4 for every meter after.

Clip-on Winding LED Reading/Pedal board Light


Very cute clip-on LED light. Use for reading light or guitar pedal board / instrument onstage lighting. The 6.5 inch pole are flexible, can adjust/ point the light according to your requirement. Use 3 replaceable watch battery but will last for long time.
Grab now quick! Stock are very low.. seriously!
RM10 per unit EXCLUDING postage

Guitar Pickup Height Adjusting Screw
Photo
I use this screw with my Jacksons humbucker pickups fit just fine.
Size: 1 inch x 1/10 inch
Selling in pair (2 per pack)
RM2 + RM1 (Snail mail) OR RM8 (Pos Laju)

This post has been edited by pyano: Apr 17 2013, 07:58 PM

This is very cool stuff that is priced reasonably, and I would like to buy one to support local Malaysian made guitar pedals & related accessories.

Please do appoint someone in Klang Valley (KL/PJ) to carry your products and to handle warranty issues.

This post has been edited by Ramin: Sep 9 2010, 04:08 PM

sound like something i would use for my mini board. especially the 4 dc. what is the dimension? size of the PSU and does it comes with angle dc jacks?

nice diy product.
maybe u can house it in metal casing, that would be even nice

TQVM ramin. For now all warranty issues handled by post only.

Size: 12cm wide / 7.8cm deep / 5.2cm height (about the same size / slightly larger than standard boss pedal)
DC Jacks: No angled one. kindly refer to the picture above

Metal/Aluminum chassis might be used in next model since the new larger transformer wont fit in current plastic chassis. But it still in early development stage.

hi bro.. can i buy only one (1x) of the straigh power connector cable?
coz im currently lacking one of the cable for my pedalboard...

if you also have 2 or 3 output daisy chain.. it would be excellent. TQ

Do you meant the DC jack? Sure can.. just tell me how you wanted it ( the cable length, number of daisy chain jacks, etc)

My pedalboard power socket is 3.5mm type

so can you make a 3.5mm plug into two normal DC plug?
the lenght would be 1feet each... so 2feet in total

if you cant do a 3.5mm plug.. then just make a DC plug... ill just use the plug converter as below...
kindly let me know the estimate cost. TQVM

PM u already!

Menarik....

harga 9500 utk sampai ke KL berapa bro....?

Nice! Could you make an adapter with 6-8 outputs instead? 4's abit.... lacking haha

RM150 + RM10 (postage) TQVM

-you can always daisy chain them. I daisy chain my personal 9500 model to power all my (now) 11 pedal with no problem at all. Not to show off, but just trying to tell how capable this power supply is.
-Since this is a custom made unit, you can discus with me all your pedal-board need.

TQVM

This post has been edited by pyano: Oct 18 2010, 05:35 AM

hi bro, could you define limited warranty?

Warranty are limited to power supply unit only (all cabling are not included) and cover workmanship/manufacturing defect under normal use only. But you can always send me your accidentally broken unit for repair with very little charge. Hope that clarify thing a little

This post has been edited by pyano: Oct 27 2010, 01:20 AM

bang 25 pedal bleh support ?

boleh encik maisu!

Anybody using this? I really wanna know how it's holding up cause i wanna put a regulated power supply on my Pedaltrain Jr

hey bro...i dono how to choose...
erm...i tell u wat effect i use den u design for me k ?
BlackStar HT-Dual but its 16V so will use the official adapter.

erm...below tis all 9V:
Behringer Dynamic Compressor DC9
Behringer Vintage Time Machine
Boss Digital Delay DD3
Behringer Choromatic Tuner

will add 1 more Wah Wah Pedal soon.

Hello,

For 9v supply, a 9500 unit will be safe bet for you. It Also got headroom for future board expansion.

if i order from you , when i can get it ?

wah...n1..next gaji kena grab one!!

usually it only take 2-3 working days after payment cleared. TQVM

okay...
Pm me ur bank acc...^^

---

Added on January 7, 2011, 3:43 pmBro..i received my item...its nice stuff...


This post has been edited by Mickeyhon: Jan 7 2011, 03:43 PM

Glad to hear you like it. TQVM & Enjoy it

boss..the Daisy chain connector cable can custom do longer abit ar ?
coz ori 1 not long enuf for me...

This post has been edited by Mickeyhon: Jan 20 2011, 04:17 PM

how about one for podx3live that feeds 2000mA ?

Sorry. the highest this PS can go in that small case is 1000mA. I think you should use dedicated PS/adaptor for the PODX3 if the power requirement is that high

bro...can u make a custom extra lenght daisy chain connertor cable.?

sure can. please sms me the spec/quantity etc tq

Looks good. Any user review so far?

Pls PM me the price for Model 9X00 and 9000 Mini..TQ

PM'ed

It's quite well built. I dont have an expansive pedal board, this powers my 2 pedals and 1 wah with ease. Beats using batteries, and for the price, this cant be beat.

This post has been edited by joe13: Dec 28 2011, 09:41 AM

Are the outputs isolated? My pedal board makes a noise when my G3 is powered with the test of my pedals by my 1-Spot

PM'ed

9200 model still available?

---

Added on March 13, 2012, 4:44 am9200 still available?

This post has been edited by invalidsatan: Mar 13 2012, 04:44 AM

9200 are no longer available. The lowest is 9500, 5x9v output @ 500mA Priced at RM160 excluding postage. TQ

This post has been edited by pyano: Mar 20 2012, 11:01 AM

160 including posting?

postage not included tqvm

Hey bro, you only left the rm200 one? How bout the smaller ones? Pm me please.

got smaller one, model 9500. 9v @ 500mA = 5 output. RM160 + RM10 pos laju. (9x00 look, with reduced mA + output socket)

Faizal

thanks for the stuff havent tried yet though im sure quality would be superb

free bump

just waiting my RED 9500 MK2...

posted long time ago.
Thanks All Selamat Hari Raya Aidilfitri

received already....nice item bro..

selamat hari raya..

free bump

are those pedal power supplies isolated ?

nope. Tq

BRO I'M LOOKING FOR PATCH CABLES! WONDERING IF YOU HAVE ANY STOCK RIGHT NOW?

how many unit, length?

Faizal
Dream Project Studio Ipoh

Looking for about 6 patch cables for now. Erm. Length not sure yet. need two for each 6, 12 and 18 inch. And I was wondering if you have stock for that 9X00 MK2?

All power supplies are made to order one. Usually ready in 7-14.
Ok. contact me again when youre sure about your patch cable length. thanks

Ahh. I see. for the patch cables, I'm looking for about 6. I need 3 12 inch, 2 6 inch and 1 24 inch. How much is everything and when can it be done? Need it quite urgently hahah thanks

new year 2013 bump!

please quote price for yellow color painted + 4x patch cables + poslaju to KL

thanks.

pm'ed! check your inbox

Just received mine few weeks ago.. So far it works great when i was live on stage.. Highly recommended!!

bro nak order Model : 9X00 MK2
available lagi?

Ada. Boleh proceed order :)faizal

Hey man! Im looking to order your 9500 MK2. But is it possible to trade in with my Boss MD-2 and top up money? reply asap ^^

replied trough sms!

Pm me when patch cable will be restock thx

bro are u still in business?

yes im very much still in business.
How can i help you

Here below is good and quite HOT pedal for review:



JF-42 Mini Booster Pedal:

True Bypass Switching
Power Consumption: 9VDC/5mA
AC Adapter (Optional): 9VDC-18VDC, Negative Tips (Regulated recommended)
Input Impedance: 1M ohm
Output Impedance: 1k ohm
Dimensions (W/D/H): 3.5" x 1.5" x 1.5" (89mm X 38mm X 38mm)
Weight: 0.57 lbs. (260g)


www.bestgrand-music.com
www.bestamp-guitar.com



Attached File(s)
 Hand_Wired_Guitar_Amplifiers_Series_Prices_....pdf ( 338.95k ) Number of downloads: 0

hi , do you do custom orders ?