Mind to try the 2.0 speaker, Edifier R1600T Plus or R2000T ?

see the gal on his avatar

I had stuffed mine hardly with aquarium filter
It works without problem so far.

No worries, semiconductor can operate hotter than you imagine.
I stuffed half of the box and left the space for the amplifier because it took some space in the woofer.

That gonna be very powderful

C3 is better to me leh....
M3300SF bass more tin kosong feel wor....

I has grills to cover...

Find Mr.Edifier

I use M3300 since foundation, then after that it was modded in and out

It is better than spending it on Iphone

I only got SE K320i....doesn't matter with that....
I own M3300 and i mod it, it is my experiment and i did learn a lot.

Normally plays music loud for certain time will do....

If you want go to another level, use pink noise and frequency sweep loud for like 3 hours a day continuous for a week to make sure it is really burn in.
You can search around for burn in software or CD to help you burning in your speaker too...

Difference before and after is depend on you, for me is a lot...

Put on the wall behind the woofer if you have limited polyfill, stuff all the walls if you have more.
Thicker wires does help some, if you sensitive to small changes then it would help.

Too thick kills the sound leh....

For sure it will
Good or not depends on the user

It could be bridge up 1 chip to power 1 speaker....so it needs 2.
Yes of coz it can power up C3 satellite, now you understand that it does not require much power for normal listening volume as that chip only running about 0.6W?

Me too >.<

It works, but probably underpowered feel, the chip is on hard loading

I had a dream of building amp or dac too....but 1st i need to swallow and digest all the syllabus i studied. >.<

For me nope, i never wanted to use fan cooling as it will contribute noise. I try to get the environment as low noise as possible...

Still need fan on the radiator to bring the heats out