

Spec
FA-002 / FA-003 (same for both)
Frequency range: 10.5-26500 Hz
Sensitivity: 105 dB
Impedance: 64 Ohm
Input power: 120 mW
Cable length: 3.0 M
Plug: 3.5mm with 6.3mm screw-on adapter, gold plated
Extra: one additional pairs of cushions



Review Gears
FooBar 2K (ASIO) + NuForce μDAC + FireStone Audio Little Country hybrid OTL
w/ Grado SR-325i, Audio-Technica ATH-AD700, AKG K81DJ, Panasonic RP-HTX7


Packaging, Accessories and Build Quality
To make it clear: Both of my packages are in the ‘simple’ packaging, meaning they are in paper box instead of black nylon zippered case with cut-out foam inside (as you might have read on other FA big cans review in the forum). The rep from FA told me that the two different kind of packaging reflect the difference in the targeting customer. The ‘simple’ paper box is actually more expensive to produce since it is custom designed and made, but it is environmentally friendlier (for those who like to be green) while the nylon zippered case packaging is more practical. Suffice to say the paper boxes actually do look classier than the zipped case (as far as I can tell from picture), and the general feeling resemble those of SBA-01 and DBA-02 (which are also in the Master series): It is simple and elegant.
Inside the box, you will find the headphone itself, 3m long detachable cable (with colored 3.5mm mono plug for each channel), 3.5mm to 6.3mm screw-on adapter, an extra pair of soft leather cushion, and simple manual and warranty. The 3.5mm mono plugs have a snap-on ring at the base so they will fit securely once you push then into the headphone. The 3.5mm stereo plug (for the source) does have a metal body but it is a little hard to tell in the picture.
For FA-002, you get an open grill on both side of the speaker since it is an opened design, kind of like HD650 in a sense. Underneath the grill there is a layer of thin foam separating the transducer from the open. For FA-003, there is a piece of metal where the grill is supposed to be as it is a closed design. The metal plate is actually just for show as the ear cup itself is fully sealed with damping material inside. Judging from the spec you might think FA is using the same transducer in closed / opened design but I have listen to both enough to tell they sound slightly different from each other, beyond just the design. The transducers do however share similar construction, which are around 40~ 50mm in diameter. You can remove the ear cup by removing the small 4 screws in the corner, and that actually open up a lot of ‘mod’ space for those who don’t mind to get their hands dirty.
For street price around US$170~180, these cans are neither built as good as Audio Technical nor as humble as Grado. You can definitely get better built cans for that kind of money if that is your concern, but it doesn’t mean these FA cans will break in half in one use. At least with care they will last for a long time. There are some really minor issues that I would like to see improvement, such as a stronger but more flexible metal headband, better paint job and such. However, after being a Grado user for a few years, these ‘issues’ are more of a nitpicking rather than actual problem.
The earpads are made out of soft leather with foam inner lining which is pretty comfortable but obviously not quite as comfortable as what my AD700 can offer. It is also very deep so the whole ear can be fitted inside without a problem. The headband will apply a little force and the whole fit is quite secure. You can actual move your head around without worrying much but it is not a dead clamp. I can use it for hours without any issue unless it is in a hot day as the leather pad does keep more heat than velvet pad. To switch out the leather pad is also easy, just hold the plastic ring in the base of the leather pad firmly and gently twist it one side and you can twist it out and exchange it for another, which is included in the package. The cable has both channels join on the 3.5mm plug so making it balanced will be very easy since re-termination at the end is all you need.
Overall I am happy with the build quality and the general packaging. I can see other companies offering a better packaging and build in this price range but FA has nothing to be ashamed of with what they have, especially once we move on to the next section.
Jun 4 2010, 11:20 PM, updated 16y ago
Quote




0.0175sec
0.27
5 queries
GZIP Disabled