Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
23 Pages « < 17 18 19 20 21 > » Bottom

Outline · [ Standard ] · Linear+

 ★★★ LYN PROTON WAJA Club - V9 ★★★, The Journey Never Stop!! Vroooommmmm~~

views
     
mxsteven
post Jul 27 2010, 08:52 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(rex82 @ Jul 27 2010, 08:30 PM)
for the time being the mechanic got this car tongue.gif i not sure the car is 2001 or 2002 coz the interior is different. Coz got leather seat built in and rear passenger side got arm rest at the middle of the seat.
*
Still expensive after trade in... try to check in mudah.my then u will know the market price!

Added on July 27, 2010, 8:54 pm
QUOTE(WhitE LighteR @ Jul 27 2010, 08:45 PM)
wut time the TT?
*
TT at 2100 HOUR at AL-Barakath where the Al-Farker store is laugh.gif

Added on July 27, 2010, 8:57 pm
QUOTE(ahhuat @ Jul 27 2010, 08:32 PM)
Guys, im driving premium 1.6x. Any of waja owner here ever changed cam shaft to racing cam shaft? I asked my friend about it. He told me that if changed to racing cam shaft, ecu need to be set because it is running on fuel injection. I wanna know how much is cost of racing cam shaft and labour charges.

Another thing is about header. By changing header, will i gain more power? the same thing, how much is the cost of header and labour charges?

Thanks.
*
Not much improvement on this setup!! and you are goin to waste more money! because Waja is Single cam and it has limitation on the ECU!
Try reflashing Option 1st... Stage 2 for auto is the best so far.

Racing cam and header goin to cost you more! if you really plan for higher HP... go for Bolt on! Waja BOT power is really awesome! you can easily get more than 180hp on wheel.
Check previous post! there is someone selling his BOT and stuff!

This post has been edited by mxsteven: Jul 27 2010, 08:57 PM
mxsteven
post Jul 28 2010, 07:30 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
Ahhhh... tired.... just after work.. 24 hour work non stop! err got stop for TT onli lor hehe
mxsteven
post Jul 28 2010, 04:40 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(b48753 @ Jul 28 2010, 09:20 AM)
Haha..just back from work ka?

You already see the Waja replacement spyshot not? They use 4B11 engine brows.gif
*
yea i saw the new Waja! 4B11 can be REFLASH MUAHAHAHAHAHAHAHAHA!!!! but i prefer manual on 4B11 coz the CVT so pondan.

Added on July 28, 2010, 4:46 pmi love this CzT

http://www.youtube.com/watch?v=yhy3Ut-WHhQ...layer_embedded#!

This post has been edited by mxsteven: Jul 28 2010, 04:46 PM
mxsteven
post Jul 28 2010, 04:57 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(xin @ Jul 28 2010, 04:55 PM)
4B10 is manual ma .. but is 1.8 lo ..
*
4B11 Manual is much more fun rather than using the stupid CVT with torque limiter
mxsteven
post Jul 28 2010, 05:30 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(AMC COMPUTERS @ Jul 28 2010, 05:07 PM)
Hey people i own a waja 1.6 .. i wana upgrade my skirting and bumpers anybody know where ?? i wana change my interior also with leather seats .. i found red colour leather but 2.4k is it worth ?? front seats back seats and door panel
*
from your words i know you love VIP styling! wanna to get good deal on this VIP styling pls look for Johnvk from team imperial, He can get custom interior for you in a very reasonable price..
Pm me if you want his contact.
mxsteven
post Jul 28 2010, 06:04 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(RegistraCHAN @ Jul 28 2010, 01:29 PM)
ya ya.... where did they assemble it, why the car is in KLIA..
t tot' the kilang is in Tg Malim n Shah alam..
are they made it at LOTUS?

p/s Good Luck for all the Waja Unreplacement here. dedicated hehehehe  rclxms.gif
*
Unreplacement?!?!?!? HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA.......

Bro come come... Elton give you FREE English class after you reflash! Aiyooo... i read your post with laughing tears...

Sorry dude... im not kutuk u but i just cant stop laughing!!!

PS: your signature:
MADED = SUDAH GILA what you mean is Manufactured
Running with roadtax 1st ..... your car run on fuel lah hahaha .... what you mean is My car registered at 123456 when u 1st register you will definitely have roadtax haha

Added on July 28, 2010, 6:05 pm
QUOTE(richnet @ Jul 28 2010, 05:40 PM)
TeamImperials forum website. You can find him there. smile.gif

http://team-imperials.darkbb.com/forum.htm
*
Thanks for adding in the link...

This post has been edited by mxsteven: Jul 28 2010, 06:05 PM
mxsteven
post Jul 29 2010, 01:01 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(mao2 @ Jul 28 2010, 09:43 PM)
i'm kinda going for dohc conversion for 4g18.. does there any need of re-flashing after doing so steven??
*
nope... unless if it pings
mxsteven
post Jul 29 2010, 12:22 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
I just solve my car long long ago problem!!! After my car replace from Auto to Manual, i had problem starting in the morning or cold start. This is what we normally call morning sickness. When start the car in the morning, the car started normally and die off (like no petrol reaching the cylinder) after that, the second start without any issue!!! So what i found is the incompatibility of the year 2001 ECU with year 2003 engine and above.

I have fixed the ECU by patching new parameter and import others Waja 2004 setting into it! It is working fine till now. If anyone had this same problem! pls let me know.
mxsteven
post Jul 29 2010, 03:28 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
mine sing over edi!!! it is the linkage problem...
mxsteven
post Jul 29 2010, 06:22 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(Andy0625 @ Jul 29 2010, 06:11 PM)
steven : does that apply to manual transmission only ? I do face the same problem as you some times in the morning. it makes me thing that my fuel pump going kong. doh.gif
*
not really... you transplantfrom Manual to auto or replace ECU before? coz i need to know the history when it is started.
mxsteven
post Jul 29 2010, 07:43 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(Andy0625 @ Jul 29 2010, 06:43 PM)
nope , ori ecu and auto transmission since manufactured.
*
what year is your car manufactured?
mxsteven
post Jul 29 2010, 10:51 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
Yea 01-02 had the problem!! Upgrade the firmware of the ecu and this should solved everything
mxsteven
post Jul 29 2010, 11:23 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(Andy0625 @ Jul 29 2010, 11:06 PM)
you can help with the firmware upgrade ? TT on me.
*
Huh... Can try lah but beer on u hahaha
mxsteven
post Jul 30 2010, 12:40 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(danlim @ Jul 29 2010, 11:56 PM)
then u will have to help me as well steven...mine only start after few times of turning the key..then the rpm will goes above 1k...zz
*
What is the year of your car? any conversion history?

Well this gonna be beerfest HAHAHAHAHAHAHA
mxsteven
post Jul 30 2010, 09:50 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(swk_sam @ Jul 30 2010, 01:36 AM)
Haha, mine also 02, help me upgrade, i bring u 1 bottle of beer (Flying Dogs) American Beer biggrin.gif
*
Dun be so "lannnnn hannnn" (itchy dic*) Ur car no problem later update edi got problem...

Added on July 30, 2010, 9:52 am
QUOTE(danlim @ Jul 30 2010, 01:28 AM)
2001...no conversion la..auto all the way..
*
I will try 2 car max coz i dunno this will solve ur car issue or not! but anyhow i solve mine!!!

Added on July 30, 2010, 9:53 am
QUOTE(mao2 @ Jul 30 2010, 02:01 AM)
naaahh.. not really serious on it.. just that my brother said its kinda help in certain things.. thats all.. and if do also just for fun trying2 since its only cost 1.4k.. if i really into modding into performance.. i'd go for BOT like steven also.. ahahahahaha
*
BOT is nice but after that ur car cannot borrow to other ppl edi or sure koyak in no time hahahaha....

Added on July 30, 2010, 9:55 amTomorrow i will be at RSdynotune replacing my current radiator to fully custom Aluminium radiator... Will also go jalan jalan to solve my car extractor bocor problem...

Who wanna 2 follow pls inform me early

This post has been edited by mxsteven: Jul 30 2010, 09:55 AM
mxsteven
post Jul 30 2010, 10:01 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(coyouth @ Jul 30 2010, 09:58 AM)
are AMP shock absorbers good?
*
AMP is no good coz never hear before.... APM also very bad

APM= Angkat Pasang Mati
mxsteven
post Jul 30 2010, 10:16 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
APM is considered the WORST AUTOMOTIVE PARTS IN THE HISTORY.... all CUT COST
mxsteven
post Jul 30 2010, 10:37 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(coyouth @ Jul 30 2010, 10:19 AM)
so, oem shock absorber part for waja uses which brand?
*
If you going for stock comfort! Try to use Kayaba or you want performance and a bit comfort! then take APM Perfomax (Good stuff is more expensive) haha
mxsteven
post Jul 30 2010, 10:58 AM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
Ori is apm
mxsteven
post Jul 30 2010, 05:26 PM

Getting Started
**
Junior Member
58 posts

Joined: Oct 2007
QUOTE(Andy0625 @ Jul 30 2010, 04:30 PM)
i know i should really play with him harder but corner ahead , no titanium balls. almost shrink already tongue.gif
but for you guys that using manual transmission should be much much better though. needless to say , the one with pwwweeeesh pweeeeeesssh sound.  laugh.gif
*
wat wat...... dun tarik me masuk water lah!!! i drive very polite and slow one! I BOT because i dont own a BOT before but this BOT is on road not on water HAHAHAHAHA
« Next Oldest · The Fast & The Furious · Next Newest »
 

23 Pages « < 17 18 19 20 21 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0385sec    0.54    7 queries    GZIP Disabled
Time is now: 3rd December 2025 - 01:22 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.