Aug 2 2010, 03:36 PM
QUOTE(rizvanrp @ Jul 30 2010, 04:37 PM)
You can wire it directly if your Smoothwall can assign VLAN 500 to the physical WAN port and use that VLAN as the PPPoE WAN interface. Alternatively, you can have a VLAN aware switch in between the smoothwall and huawei to perform the necessary VLAN tagging/untagging or even put the DIR-615 into VLAN bridge mode ( http://unifi.athena.my/index.php?option=co...id=49&Itemid=61 ) to do this for you.
I'm not too sure if the Huawei itself can be setup to bridge a VLAN to the physical LAN port since I don't have that particular unit.
Many Unifibiz users have this issue..
Huawei modem itself can be done through port tagged/untagged in Telnet interface. The default configuration will have all 400/500/600 VLAN tagged to all 5 ports (FE1/FE2/FE3/FE4/PON). Since you doesn't need IPTV, I think all you need is connect smoothwall and have PPPOE interface.I'm not too sure if the Huawei itself can be setup to bridge a VLAN to the physical LAN port since I don't have that particular unit.
Many Unifibiz users have this issue..
*Note that connecting to end device such as PC will not work since these ports are tagged mode instead of untagged mode*
Infact, I did manage to dial directly from huawei modem by adding WAN interface and create new TR069-INTERNET PPPOE Dialer but lack of feature such as DMZ/Port Forwarding makes it pratically useless (Perhaps UPNP will function well?).
One thing like I've mentioned before, if you are connecting to end device, you need to untagged one of the port instead of tag it but configuration will back to 'factory settings' once huawei modem is rebooted.
I'm currently overseas, will post up some Huawei configuration CLI once I get back to Malaysia.
Quote
0.0140sec
0.54
7 queries
GZIP Disabled