add me in


Persona Elegance - H Line - Brilliant Red

Just a question,anyone how to use the USB function on the radio.. i stick my thumdrive and it keep "Reading" for a long time..

Is there anything that I have to do in my thumbdrive for the radio to read the songs properly

Manage to capture from my Iphone -- Brilliant Red Elegance on Road @ Bangsar..

Seldom see on road.

[attachmentid=1631987]

bro.. the colour is the same as Persona SE 

Actually the same color as the SE Brilliant Red. Coz I having the SE version.
The Gen2 red is totally differ.

just got confirmation from my fren...

SE & Elegance Brialiant red is the same. Colour code: A0110
Gen2 is Fire Red; new colour. Colour code: A0180

rclxms.gif

nothing serious if drop to L if driving around 80-90.....i tried on waja before..when its 50 above, the gear wont drop until it slow down...

as for the gear shifting till 6000rpm..
L-usually up to 60km/65km for 7000rpm
2-up to 100km or 115km if rev up to 7000rpm
3-165km or 175km if 7000rpm
D-topspeed...190km @ 5400rpm

nothing serious if drop to L if driving around 80-90.....i tried on waja before..when its 50 above, the gear wont drop until it slow down...

as for the gear shifting till 6000rpm..
L-usually up to 60km/65km for 7000rpm
2-up to 100km or 115km if rev up to 7000rpm
3-165km or 175km if 7000rpm
D-topspeed...190km @ 5400rpm

So that means if driving at around 80-90kmh & suddenly need to slow down immediately, just shift the gear from "D" to "L" will not spoil the engine or the gear box??

Will it cause the car to jerk suddenly?

I never use L before, but I know D to 2 there will be a sudden jerk of rev happiness.

I think the Persona will disown you for doing that. Lol

I took the red; waited almost 3 months because my sales agent is useless/incompetent. Anyhoo, the color is a different shade of red when it is under different lighting conditions. It looks best at night.

I don't like the drive-by-wire throttle, but I like the leather seats.

I bet nobody likes drive by wire. I hate it too.

Taken with camera phone outside Proton Edar Puchong. =)

I'll take some photos and post it up tomorrow. In the mean time, here's a quick pic I took last week at around 6pm. Color's a bit off due to the camera.

Drive-by-wire has this lag which is quite noticeable to some, including me. Maybe if Proton had programmed the ECU better.. 

we are still waiting those already successful install Garmin into Lokatoo A903 model. Anyone?

I just realise that my car also have the faint eeeeeeeeeee sound. -.-

just finish my first full tank. 380km++. 1L do 11.04km. 80% Rush Hour Traffic Jam 20% Highway/Garden roads.

i already remove my safetint lor... really useless.. claim warranty also very long.. some more the safetint don have heat rejection

humm..... seems like another problem with elegance models....adding to the famous 32bit ecu problem.

it just Not recommended since it is still new.. furthest mayb 100km/h still ok.
but it is also Not recommended to rev more than 3k RPM.  its ok to go above 3 but not everyday.. >.<
i believe for those persona manual drivers cant stand to rev more than 3k even thou still below 1k mileage .. thts how i feel 

before 1st service, try to maintain below 1k rpm.

typo. should be below 3k.

By default, all car should run in their engine on their 1st 1k km.

more review of my new changed brake pad.

today i could feel i'm more comfortable and confident driving back home in the jam + raining. IF with the stock brake pad i 'll keep on worry when the car will it stop after i hit the brake. Now no more worry.

after market brake really does make a difference. no regret

It sure does buddy. I am glad u changed the useless stock pads.

I guess not. Mb highly depending on the SC. Like mine, i still claim new set of disc rotors even when i am using aftermarket pads.

---

Added on August 20, 2010, 9:23 am

1. Check for dents and scratches. Also under the front bumper which is very very common to have scratches due to shipment (when going up and down the steep steel ramp on the ship).

2. Tools. Check to see if all of the tools are in the bag. Sometimes it is missing 1 or 2 items.

3. Open up the engine bonnet. Check for missing caps or covers. Mine was found with a missing fuse box cover it was replaced immediately on site.

4. Check for fluids - engine oil level, radiator coolant, ATF level (for auto only)... it is better safe then sorry. Sometimes these final checks by the SC before handing the car over to customer, they might overlook it.

5. Lighting - check all lights are functioning.

6. Check all electrical items are functioning.

7. All set! Drive away your new ride!

8. Did i miss out anything? Hope not! 

any 1 try to mod their PE backlight ? i thinking to put a bulb at the bottom of the light unit where there is only a round plastic in it ..
dunno why they din't put break light in there .. feel more nice if there got red light from there but dunno how to open all the stuff