You are my idol d la. Hahahaha. So geng.

Anyway, I found out that my PE always have this "tak....... tak....... tak....." sound after i turned off the engine and get out.
Also the fan will start turning again suddenly around 5 mins after i turn off engine, sound for 1 or 2 mins then turn off again. -.-

u're lucky ur fan turning after 5 min.. mine no turning anymore unless i drive for a long journey..

'tak.. tak.. tak... sound is normal when metal cooling...
even my old waja have that and still can achieve 180kmh .. for info.. my 2002 waja auto...

but now using persona e high line... max speed right now 170kmh.. scare to go higher..

---

Added on July 23, 2010, 8:35 amjust check my car... near 1/4 level from above and mine clock 415km...
maybe can get 450km at 1/4 level..
right now... i already travel 2012km....

its not lack of power..
it only that u're not familiar with drive by wire..
i also face same problem like u before..
now after 2k, i already can estimate when the gear may change with pedal control.. although still not familiar yet
but i can feel the power.. just need to know the power band

This post has been edited by bex9432: Jul 23 2010, 08:46 AM

H-Line here, not you cannot adjust the timing like waja.

wow..thats nice 120kmh below 3k
mine 100kmh already reach 2.8k
auto tranny also

is that effect of aftermarket header?

mine all standard also 120km/h at 3k rpm... just let all ur gear changes in about 2.5k rpm.. for auto.. jimat minyak ma...

Just back from Serdang SC and done my 2nd Service. Total Dmg RM 115/=
Claim 1 new Horn. Went 8:30... Service done around 9:40
Ask the mechanic dun pour all the oil. (Done)...but forgot to take back the remaining new oil....haiz

This post has been edited by muslayer: Jul 23 2010, 10:27 AM

Your ICM Relay don't have problem? What about the knocking sound when cornering on rough surface? All solved? Last time during my 1st service, the worker put all the engine oil, I asked, he said Campro require 4L engine oil, therefore they will put all.

the ICM ar...i dun really bother...as long my car can start ..no problem...the "eeee" sound sometime have sometimes don't
I ask the worker (chinese tall guy)...dun put all...he didn't put..but i left the remainig oil there

Which engine oil u used? 10-40 or? Do you still encounter "metal knocking sound"?

maybe yours IAFM eh?
mine normal campro, was all standard also get 3k on 100km

hey guys...

weirdly... my problem is the opposite.. i have metal knocking noise from the back of my car ... when going on rough surface...especially evident when.. cornering... up/down a small slope... wonder wat makes tat noise...

Don't have.....I use Shell Semi HX7..

did ur Persona undergo 2 times of inspections before it get registered to u?

first time was in Proton factory
2nd time was in dealer's appointed SC

just now my car dealer said that their SC found out my car got some problems, thus they have changed a new car

but why Proton check no problem, but after drove to SC baru detect the problems? I suspect Proton factory close one eye on minor QC issues

This post has been edited by dattebayo: Jul 23 2010, 12:58 PM

proton factory... got do QC check de meh??

yours is elegance model? M or H line?

Mine IAFM model....M-Line

yup.. IAFM..

i want solve the metal knocking sound and the icm relay problem for elegance model!

Are your car's rear seats the foldable type? Could be the cushion striker. It has to be insulated.

yes ... my rear seats are the foldable type. What do u mean by cushion striker???