Hi. May I know where I can get Power Support USA's Crystal Clear in KL / PJ? Thank you.

more picture and detail review for vapor : -



more pictures on the vapor: -

conclusion: it a very great case, high graded material, precisely cut-out, very fine finishing. highly recommended.

con: cannot fit the iphone 4 dock

wow nice,, where can buy this? in nearest country..

u mean the protector come with the sgp carbon fibre? answer is no. i'm using powersupport for front and back

Just to clarify you stick the SGP carbon on top of PowerSupport back protector?

I know this is probably not related, or maybe it is, but I just had a darn weird dream. I dreamt that I had beavis68's combo of SGP and Vapor. It was horrible - because now that I'm awake, I don't! Worst part was, it felt so real.

LOL probably because the shots he takes are so good and high-res, it makes it look so real! What are you doing sleeping in the day lah, puasa ka?

u mean the protector come with the sgp carbon fibre? answer is no. i'm using powersupport for front and back

Both mine and Beavis's iPhones have PowerSupport Clear on the back. We kept it there and stick the Carbon Fibre back on top of the PowerSupport Clear SP, just in case that if the Carbon Fibre leaves sticky residue if stuck at the back, the SP will protect against it. I have more confidence in PowerSupport than SGP when it comes to not leaving a messy residue behind when you remove them.

So you can say that our iPhones are double-layer protected, but because the Vapor case just hugs the side of the iPhone, this double-layering does not interfere with the Vapor case when installing/tightening the screws. In fact, because of the double-layering, the back surface now looks like it flush against the Vapor case, like it is part of the case itself.

I've never said this before, but of all the cases I have bought(trust me, I have lots, from silicone, hard TPUs, cheap/expensive plastic, etc), nothing compares with the Vapor. The iPhone 4 with the Vapor case gives this feeling of heft and solidness when you hold it in your hands. And since both of us uses the PowerSupport AntiGlare SP for front and Carbon Fibre for the back, we dont ever need to wipe our iPhones down for fingerprints anymore. The back is covered with smooth texture by the Carbon Fibre, and the front is anti-fingerprint and antiglare. Perfect!

from ur posts, i gather that u guys use PowerSupport SP bcoz of messy residue from SGP Carbon right?
so, if im interested with SGP Ultra Slider, i believe i wont encounter any messy residue issue. so, is it okay for me to use the Steinheil Ultra Crystal SP that come with SGP Ultra Slider? or is it recommended that i also use PowerSupport SP as 2nd layer of protection?

The back layer u can use any ciplak protector if you going to get the carbon fibre sticker. Coz the sticker will sit on the protector and u can't see the protector at all.

Beavis is right. You can opt for either using the Ultra Clear SP that cones with the Carbon Fiber pack or get an AntiGlare alternative. If you still prefer Ultra Clear, I recommend either the PowerSupport AntiGlare HD pack, that one comes with both Ultra Clear AND Antiglare HD SPs, or the Ultra Oleophobic SGP SP. The guys at MacStudio has that Ultra Oleophobic SP and it's the Ultra Clear type SP, and leaves very very minimal finger oil.

So in short, I recommend these two combination:-

1- Front = AntiGlare = PowerSupport AntiGlare HD, Back = Carbon Fiber = SGP Carbon Fiber Cube

2 - Front = Ultra Clear = Either the Ultra Clear PowerSupport SP that comes with the Antiglare HD pack, or for the most minimal finger oil while maintaining the clear look, get the SGP Ultra Oleophobic. Back = Carbon Fiber = SGP Carbon Fiber.

I prefer option 1 since I don't even have to wipe down my iPhone 4 anymore, the PowerSupport AntiGlare HD is fingerprint resistive. The Carbon Fuber back of course doesn't show fingerprint at all. Option 2 if you really must have the Ultra Clear look, with option for the best Ultra Clear SP in my opinion, the SGP Ultra Oleophobic.

Good luck!

Beavis is right. You can opt for either using the Ultra Clear SP that cones with the Carbon Fiber pack or get an AntiGlare alternative. If you still prefer Ultra Clear, I recommend either the PowerSupport AntiGlare HD pack, that one comes with both Ultra Clear AND Antiglare HD SPs, or the Ultra Oleophobic SGP SP. The guys at MacStudio has that Ultra Oleophobic SP and it's the Ultra Clear type SP, and leaves very very minimal finger oil.

So in short, I recommend these two combination:-

1- Front = AntiGlare = PowerSupport AntiGlare HD, Back = Carbon Fiber = SGP Carbon Fiber Cube

2 - Front = Ultra Clear = Either the Ultra Clear PowerSupport SP that comes with the Antiglare HD pack, or for the most minimal finger oil while maintaining the clear look, get the SGP Ultra Oleophobic. Back = Carbon Fiber = SGP Carbon Fiber.

I prefer option 1 since I don't even have to wipe down my iPhone 4 anymore, the PowerSupport AntiGlare HD is fingerprint resistive. The Carbon Fuber back of course doesn't show fingerprint at all. Option 2 if you really must have the Ultra Clear look, with option for the best Ultra Clear SP in my opinion, the SGP Ultra Oleophobic.

Good luck!

great piece of info given.. wondering can we buy  SGP Carbon Fiber Cube in kl?

LOL, it's just that when the product is so much better than the other, you can't help but to feel empowered and inclined to recommend it to others. It's like all this while you've been driving a normal Proton but suddenly got a chance to drive a sports car, you swear that no other driving experience will compare to it. And yes, the Vapor case makes the iPhone look and feel like a sports car. One word: Badass!