May 3 2010, 09:59 PM
QUOTE(nomoney @ Apr 23 2010, 09:50 PM)
Hi, i have some problem and hope all pro out there can help me.
Let me list my spec 1st:-
Proc: AMD Athlon 64x2 5000+ (2.6GHz(13x200))
MoBO: Gigabyte MA785G-UD3H
Ram: Kingston Value Ram 1GB PC2-5300
GC: Palit 8600GT
PSU: Huntkey 750W
My problem is, my pc just can OC to 2.8GHz(224x12.5) only.
On 2.8GHz it is stable.
When I try to OC to 2.9GHz, the system was unstable.
I already:-
-Increase the voltage to 1.400V. the stock voltage is 1.3000
-lower the HT
I dont know what's the problem is..
Is it because of my proc temperature??
I check my temp using EVEREST.
My Average temp when load(100%) is about 70 degree celcius.
The CPU#1 and CPU#2 reach 100 degree celcius.
One more thing, my bios wont save the memory timing setting.
I've search on google but the answer does not satisfy me.
Hope u all can help me. tq.
some ram will prevent you hit higher base clock even you lower down the dram divider.Let me list my spec 1st:-
Proc: AMD Athlon 64x2 5000+ (2.6GHz(13x200))
MoBO: Gigabyte MA785G-UD3H
Ram: Kingston Value Ram 1GB PC2-5300
GC: Palit 8600GT
PSU: Huntkey 750W
My problem is, my pc just can OC to 2.8GHz(224x12.5) only.
On 2.8GHz it is stable.
When I try to OC to 2.9GHz, the system was unstable.
I already:-
-Increase the voltage to 1.400V. the stock voltage is 1.3000
-lower the HT
I dont know what's the problem is..
Is it because of my proc temperature??
I check my temp using EVEREST.
My Average temp when load(100%) is about 70 degree celcius.
The CPU#1 and CPU#2 reach 100 degree celcius.
One more thing, my bios wont save the memory timing setting.
I've search on google but the answer does not satisfy me.
Hope u all can help me. tq.
This post has been edited by saturn85: Aug 6 2010, 02:52 PM
Quote
0.0155sec
0.69
6 queries
GZIP Disabled