For the industrial spray can, i usually use DPI/Anchor brand.
Works the same and extremely cheap!!!
just be careful sometime the metallic paint particle is thick, cant get a very smooth surface...
Rm5-7 per can, 400ml compare to Tamiya/mr hobby spray can which cost RM30 per can, 100ml...
Even if anything wrong happen, just use mrhobby thinner to clean off~~
CAUTION!!! DO NOT, i mean DO NOT EVER try using industrial thinner, model kits surface will melt and here goes your modal kits...!

wow~ get your advice~

i really hope anchor brand release matt clear paint !!!

i totally agree with funnyface! just tested using cheap spray cans. WORKS!

For the industrial spray can, i usually use DPI/Anchor brand.
Works the same and extremely cheap!!!
just be careful sometime the metallic paint particle is thick, cant get a very smooth surface...
Rm5-7 per can, 400ml compare to Tamiya/mr hobby spray can which cost RM30 per can, 100ml...
Even if anything wrong happen, just use mrhobby thinner to clean off~~
CAUTION!!! DO NOT, i mean DO NOT EVER try using industrial thinner, model kits surface will melt and here goes your modal kits...!

About Top coat ,which 1 are better? any recommend?

if use industrial spray can, still need to use surfacer?

sorry if this hv been ask b4 

Personally, i use Mr.hobby topcoat. around Rm30 per can, 100ml.....
still cant find cheaper alternative that can do the job right...

---

Added on September 21, 2010, 7:34 am
I got try to use -->Primer?
but it will become a layer of rubber as undercoat which......well, spoil your models....
So end out spraying without undercoat/surfacer, no problem so far...

If anyone of you want to see the effect of spray can....



That is MG Sinanju Ver Ka normal edition. I use Anchor spray to make it titanium look.

*Silver for inner frame and red pieces undercoat. Then Fire Red on second layer. The black colour i use flat black. Then i use Gaia Star bright gold for the gold line...

veli nice. smooth too in the close up shots

wow.. really nice.. thumbup.gif rclxms.gif

Anyone here used My Hobby or Gaia thinner before?
They are much cheaper than Mr Hobby thinner so am thinking of switching over if they work the same.

well, seeing as how you can mix Gaia and Mr Hobby paints together, their thinners should be the same as well. Gaia paint = WIN btw

if you get it from tkting, gaia 500ml is 38.40 cheaper lo..

campur shipping around RM45 for 500ml.....   Not bad, can consider...
Anyone can try then let us know how the Gaia Thinner works?

no need shipping wan la.. just go to his house lo. then he will poison you.. before you know it, you'll walk away with all sorts of stuff.. hahah