guys.. i need help..

my next system gonna be..

Venice 3000+
2x256mb Kingston HyperX PC3200 BH5
DFI LP NF4-D / DFI NF4 DAGF

i'm thinking of these settings..

HTT = 300mhz
HT Freq = 3x
Multiplier = 9x
Set Memory Divider = DDR 333
Vdimm = 3.2V ( my BH5 can do DDR500 @ 3.1V )

the result would be..

CPU Speed = 300 x 9 = 2700mhz
Memory Speed = DDR 500 @ 300 HTT (using divider)

1. is there any known issues when running BH5 + NF4 + dividers ?

2. does my calculation on divider correct ?

3. which board should i go DAGF = RM 380 or NF4-D = RM 560 ?

is it worth to add another RM 180 for NF4-D

This post has been edited by dinster: Jul 3 2005, 12:35 AM

// dinster :

1. yes bh-5 can run well on nf-4 board
2. yes it correct 300*5/6 = 250MHz
3. go for ultra-d, its worth it... can mod into SLI-D anytime =)

Evogenix

correction, it's not Ultra-D, it's NF4-D

but it's still modable to SLI-D

thanks for the reply !!!!!!

1. no issues running divider

2. ur ram will be at 245mhz not 250mhz.. (use A64 helper to calculate)

edit : link http://forums.extremeoverclocking.com/show...ad.php?t=149717

3. if u can afford the NF4-D go for it.. DAGF don't have the 4v jumper.. so u won't be able to go past 3.2v unless u have a booster or a psu with adjustable rails.. both won't have SATAII .. but if i'm not mistaken u need to connect 2 bridges to enable sata II and NCQ

me say go DFI NF4-D

This post has been edited by babyelf: Jul 3 2005, 01:10 AM

@ babyelf @ Evogenix

okay.. sorry but..

i do not need SLI, NCQ, 4.0 Vdimm and Sata 2

3.2 vdimm is enough for me..

so.. in my case.. should i go for DAGF ?

me really really have to minimise the cost..

This post has been edited by dinster: Jul 3 2005, 01:52 AM

DFI DAGF is a good choice considering you are not going for SLI setup. If you are really on a budget, you don't need bling stuffs IMO. Furthermore you've mentioned that the RAM is capable of pulling impressive figures at 3.2v. But I ask most of the shop at LYP, they are not selling DAGF. Personally dinster, DAGF is a good choice, in fact perhaps I should be getting one. My NEO2 is just too old.

maybe sli-dr are on the way bro...hehe...

if this screen shot has been posted before, mod please delete my post ya...

some cpu-z funny screenshot by a user in Cooler Master Official Forum..

7.2 Ghz


getting more worse


he did'nt overclock or anything, just the cpu-z screenshot make it appeared like this..huhu
original thread : link

This post has been edited by moderno: Jul 6 2005, 02:19 AM

here's mine...

steppings are 0516 DPJW on XP90C and 92mm Thermaltake Smart Fan 2 @ 4.2krpm

already bought the DFI NF4 DAGF = RM 365

from Viewnet

according to Kenn Lim (Robyncom) the DFI NF4 Infinity is coming next week..

but if u look at DFI website.

all i can say is DFI DAGF = DFI Infinity

guys if i wanna buy DFI NF3 any1 in this topic willing to courier for me?? cozt i fell more trusted i ask in jb for the price i thinking around RM450 and below then the seller offer me for RM 5++ WTF!!

This post has been edited by fatalynx05: Jul 6 2005, 08:23 AM

got bulk orders only for nf4...maybe u could ask them to 'selit' the nf3 for u..

eh, PCCRAZY you made a mistake in your ranking there la.
i'm using stock cooling not XP-90 and it's NEWCASTLE not CLawhammer

jz to make the record right

Gee, noted and will update ASAP. hmm, I didn't notice there are some few new entries also.

infinity got SLI
the price is about rm5xx

from the pic below my 1st try for reaching 2.5ghz successful on arithmetic benchmark failed on memory benchmark i disable the 1T command even try 2.5-3-3-8 but loosing some timing might work fine rite?? plsss shifu help mee...



This post has been edited by fatalynx05: Jul 20 2005, 12:56 PM

wah!!!...juzs weeks on vacation now aledi 7gigs????...wahlawwehh...need to crank up my rig tonite...wanna break the Bootable Record....aiyakkss...if can ler...



i'm at 7 only....cikai lor...

This post has been edited by antonio_zth: Jul 20 2005, 06:37 PM

my venice......



2.808g with 1.568vcore (xp120 thermalright with 120mm delta)

This post has been edited by gamers maniac: Jul 21 2005, 12:19 PM

need setup....plz lend me ur setup...



This post has been edited by antonio_zth: Jul 21 2005, 02:13 PM

Tonight i'm gonna Blast my rig up once and for all....either history or even just a cliche`by tommorow....

CPU = Winnie 3000+ 0503 @ 2710 the most i got while i was on MSI...now the DFI should provide me with more options to reach a bit higher....i wont hope for much...above 3k oso enuff aledi for me...

CPU Planning voltage above 1.9v
Ram Planning voltage above 3.8v
LDT 1.7v
CHipset 1.8v

See what happends tonight....

wish me luck...