Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
8 Pages « < 2 3 4 5 6 > » Bottom

Outline · [ Standard ] · Linear+

 AMD 64/SEMPRON ---- OC DATABASE, Ocing results..OC problem?ask here..

views
     
antonio
post May 25 2005, 11:02 AM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
mebbe we got the cincu UTT kots...uwaaaaaaaaaa....summore no gurantee also what...thats why its cheap...not cheap interm of per stick...cheap compare to those platinums....

uwaaaaaa....now OCZ memtest running at 2.9v@2.5-3-3-7 200mhz 200HTT X 5...ram temp 39-45c....no fans....stock condition test only voltage higher.....see how it goes...this mornin left for work no error for 9 hours aledi...start yerterday nite b4 sleep.....
antonio
post May 25 2005, 11:29 AM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(remysix @ May 21 2005, 08:58 AM)
nailed the culprit...i think i got a bad stick...tried one stick at a time...1st one can do 220@2226 with 3.20vdimm...ran for 10hrs...no error...the second one...at 200@2226 with 3.20vdimm...70K of errors without finishing a single round...i did full test...so, set the timing down to the spd...200@2.5338 with vdimm 3.20v...same results...tons of errors...i tested it on yellow dimm...so changed to orange...same result...using 510-2 bios which is optimized for bh5/utt type of rams
and also...that bad stick couldnt load windows at spd...always got that SOB BSOD screen...now using windows using the good stick...aiya...hate to do the RMA thingy...
*
as in ur case u got a bad stick....me however are stick which are bad on overclock but runs well on stock speed...so how to RMA...

wished it failed on memtest at stock speed so i can RMA it...hahahaha.....but at the sticker it stated 2.5-3-3-7 but in CPUZ the default value is 2.5-3-3-8...hmmmm can saman OCZ for the misleading info ahh????hahahahha...

wanna be the first malaysian to saman OCZ...kakekekkeke... shakehead.gif
antonio
post May 25 2005, 02:30 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(PCcrazy @ May 25 2005, 12:51 PM)
Its normal for RAM manufacturers to do that, OZC pc3200 EL rated timing is at 2-2-2-5, but SPD rated it at 2-3-3-8 if im not mistaken. But then if you can run at the rated timing SPD timing is no big deal. Antonio try burning in again, this time with high vdimm and loose timing. Dont forget to put some active cooling on the RAM.
*
QUOTE
Mark099
BE Member


Join Date: Feb 2005
Location: Maple Ridge, BC
Posts: 76  

--------------------------------------------------------------------------------

OCZ warranties the ram to run at default speeds with default voltage. In the case of the value VX, it's 200Mhz at 2.5-4-4-8 with 2.6v.

Also, keep in mind that your ram may just need a couple of weeks worth of burn-in.
__________________
Mark099!

Athlon 64 3400+ @ 2.5Ghz | DFI LanParty UT nF4 Ultra-D | Sapphire Radeon X600 Pro 128MB PCI-E | 2x 512MB OCZ Gold PC3200 VX DDR | 80GB Maxtor 8MB 7200RPM HDD | LG 24x10x40x CDRW | Iomega 250MB Zip | Landmark ATX-A70 23" Aluminum Case | Enermax Noisetaker 485W PSU | Windows XP Pro SP2 


see....sum guy from OCZ forum replied aledi...

see a few weeks first what happen..... thumbup.gif

no need active cooling...biar burn until black...then can bcome mushkin LL Black....hahahahaha.... notworthy.gif

This post has been edited by antonio_zth: May 25 2005, 02:50 PM
antonio
post May 25 2005, 03:14 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(remysix @ May 25 2005, 03:09 PM)
but the stock rating...or spd should be achieved without burning laa...the first line is ok...burning is done when u want to achieve higher than what is rated...this is like buying Maggie Ayam Flavor...but when u want to eat it, you need to prepare your own chicken soup or something...it should be "Cepat Dimasak Sedap Dimakan drool.gif "... so in other word (beside the maggie ads)...take out the sticks from the packaging, plug it in, and run it at stock rated speed and you should achieve it...or am i misunderstood the mesg? rolleyes.gif
but then...everybody is burning their ram sticks...so np actually, just gatal tangan want to post in here biggrin.gif
*
huh??

what does it mean??dun really understand especially the 'maggi' thing... shocking.gif

antonio
post May 25 2005, 05:47 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
owhh....a few week???

after installing the rams not even 2 days of on PC wor....mebbe thats bcoz my rams arent burn in enuff....
antonio
post May 26 2005, 10:31 AM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(jslut @ May 25 2005, 09:22 PM)
it's D0 stepping brudda, sempron got no E3... that's for socket 939 tongue.gif

but basically from same type of wafer, but with much lesser cache and no 64bit sweat.gif

PCCRAZY, UPDATE!!!!!! tongue.gif
*
so how is overcloking jslut???....any achievemnets lately...show us some screenie lar... thumbup.gif
antonio
post May 27 2005, 10:49 AM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
never hurt to be the first one to jump the ship smile.gif
antonio
post May 27 2005, 05:48 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(babyelf @ May 27 2005, 04:34 PM)


xp90 & tornado..

just got xp120 in the rig now.. will try higher.. i smell 2.9

and preparing watercooling setup.. i think at 1.7 will hit 2.95 at least.. this proc still have quite a bit of headroom

ram is 3200LLv1.1 BH-5 .. will do 260 3.3v stable 310 official bios.. 270 2-2-2-5 3dmark05 benchable.. haven't tested highest clock for it..
*
fuyyooo....kuat nyer....bila la aku nak sampai level nie... thumbup.gif notworthy.gif

antonio
post May 27 2005, 06:06 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(remysix @ May 27 2005, 06:05 PM)
that burn in process is killing me...and silap2 the ram as well...
*
wahlawwehhh...wa pun sama juga....wahlawwehhh... cry.gif notworthy.gif
antonio
post May 30 2005, 02:15 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
Ram Limit = 10 meters b4 it hit the wall
+
CPU limit = 1-3 inches b4 hit the wall
=The max u can go b4 hit the wall...well u'll hit the wall sooner or later anyway..... smile.gif
antonio
post May 31 2005, 10:09 AM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(aichan @ May 31 2005, 09:56 AM)
owww....thanks for the tips biggrin.gif
*
thats why he's the Boss!
antonio
post Jun 4 2005, 10:36 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(arj @ Jun 4 2005, 10:33 PM)
New max stable OC for my Venice flex.gif

user posted image
*
juz wanna ask....running dividers ahh bro???
antonio
post Jun 4 2005, 10:44 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
2X512MB OCZ PC4200EL Platinum oso must on dividers???cant push it 1:1....like those TCCD guys ahh??? smile.gif
antonio
post Jun 4 2005, 11:18 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
oooOOoOo....pushing them to the limits lar...baru besh!.. tongue.gif
antonio
post Jun 6 2005, 11:57 AM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(ianho @ Jun 6 2005, 05:01 AM)
What is that? I don't know what's stepping code.
*
the (CDDIB 0203 CPWJ )
sumthing like that....

find it on top of the HS on top of ur chippie...
antonio
post Jun 7 2005, 06:36 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE
dreamkiller Posted Today, 01:46 PM
  rezzz!.. any information about divider for my motherboard........


dreamkiller Posted Today, 01:39 PM
  what's the best temperature monitoring software other than core center

babyelf i cannot find nothing with dram divider

jus found this fsb startup
raise the HTT from 200 to what ever value u want to O/C...save settings...reboot...see what happends...if got tittttt titttttt tittttt sound then ur ram has problem wif the speed...so press insert while booting then lower htt see what happens....

ALWIZ REMEMBER

while juz raising HTT without touching other settings u might wanna know that ur HT Speed is already more than 1000mhz...the instability would really easy to happend....its better that u read through 1st on how to overclock an AMD 64 bcoz it is slighly diffrent..these are some tips on how to overclock easy..(but not too high)

vcore 1.55v
vdimm 2.8v
RAM latency 2.5/3-4-4-8 (try this first for beginners)
RAM Speed 200
HT X 4
HTT/FSB = Raised to 250 by 10 or 5 increments from 200...
pci/agp lock = 67/34

Hope this helps...

and about PSU...u should never in the first place even think of using it...throw it away...coz its like a time bomb which waits patiently for the time to blow up....get Acbel coz its cheap...get OCZ or Antec NEO or TTGI coz its powerfull...get a Ultra x-connect coz its cun.... tongue.gif

The core center try to download the latest version which is......i dunno...my MSI Neo2 blew up last 2 months....so i dunno any updates for MSI...
antonio
post Jun 7 2005, 06:39 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(LittleLinnet @ Jun 7 2005, 06:10 PM)
my winchester 3000+ also cannot go higher then 2.0
not really know how to set the divider also.....
*
Dividers setting are usually at the DRAM Setting at the Advance Chipset Settings or Advandce Settings

it usually sits on auto or 200.... thumbup.gif
antonio
post Jun 8 2005, 04:41 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
my rams cannot do cas 3...
antonio
post Jun 9 2005, 11:14 AM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(PCcrazy @ Jun 8 2005, 07:08 PM)
What do you mean by that,

What RAM is that... even cheap KVR capable of CAS 2 at stock...
Btw CAS doesn't matter anymore, RAS# to CAS# and RAS# precharge are most important values to look after...

What makes the cheap KVR suffers on performance is because RAS# to CAS# and RAS# precharge values must be set at  4 when attempting higher FSB/HTT. But then again, if you are gamers, you wouldn't notice slight increment in fps 3-4-4-8 gives instead of 2-2-2-5, the price difference just don't justify the needs of getting one. (unless you are benchmark freaks)
*
OCZ BH-5 chippie...n yes i become a benchmark freak...muahahuhauaha.... cry.gif shakehead.gif thumbup.gif

QUOTE(PCcrazy @ Jun 8 2005, 11:36 PM)
I misunderstood him laugh.gif 
*
wahlawwehh...u forget my rams meh?? cry.gif
antonio
post Jun 14 2005, 02:14 PM

AMD Phenom II & Intel i7 Overclocker
Group Icon
VIP
4,032 posts

Joined: Jan 2003
From: MSR Headquaters
QUOTE(dinster @ Jun 13 2005, 09:04 PM)
have fun  wink.gif
Edited by me ... too long for quote smile.gif
[/b]
*
weh din...any chance of bringing those steps in the next bulk??? thumbup.gif

« Next Oldest · Lowyat.NET Overclocking Database · Next Newest »
 

8 Pages « < 2 3 4 5 6 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0367sec    0.89    7 queries    GZIP Disabled
Time is now: 2nd December 2025 - 03:09 PM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.