I read ur post at DFI forum, and i feel sorry for u..
Imagine having the board for just couple of days...
Seems like DFI is not that good handlng RMA;s these days..
If im not mistaken, the missing pin was not ur fault right..
Even if it is, I think u still entitled to warranty--its just minor defect that shows some poor build quality of the board...

And u r not newbies, and i believe u know ur stuffs--so its rather impossible to make defects of the dimm slot..

Well, hopefully everything going well...mate

how possible is it to have do such defect by the user...i've already taking out the sticks so many time and putting the stick under xp120 is damn hard...have to wrestle it...but still no problem to the pin or board what...
it is IMPOSSIBLE for any person who is just inserting a ram stick to make such defect...this one must have passed the QC (done randomly) and they (DFI) wouldnt want to confess to their negligence...

Thanks for your concern guys. I guess i'm one of the unlucky ones to receive a motherboard like this. What annoys me the most is its electronics and problems like these surface every once in awhile. They should simply remedy it by offering a replacement without having to go through so much trouble.

At least for now it seems AG agrees with me and has consulted his boss regarding this issue. Hopefully they can elevate this matter to DFI Taiwan and change some of their policies in other regions. DFI USA's RMA is pretty fast and efficient in handling such things. There's no reason why other regions can't be just as eficient too.

Oh well, this issue has been delaying my SLI rig. Currently my CAA2C, UTT ram, OCZ 600W and water cooling setup is all collecting dust. If I have to purchase a new mobo I don't think I can afford to go for a SLI setup anymore due to unplanned financial setbacks.

This post has been edited by De_Cruelz: May 4 2005, 09:35 AM

hmmmm....plan to sell???\

nyum nyum...

he might wanna sell the mobo if the RMA didnt come thru...interested ka???

This post has been edited by remysix: May 4 2005, 11:00 AM

Thanks for the support over at dfi-street remysix . Hopefully that would speed up the process for RMA if its approve or perhaps influence the decision makers to change their mind.

As for my other parts, I won't be selling any of them at all . Especially not my CAA2C when its only got 2-3 days of workout hehe! I am planning to sell the motherboard though if RMA is not approved so I can cut my losses. From there only I can decide my next step.

np bro...hope DFI-USA can convice DFI-Taiwan on this...u just never know when will it be your turn to face such a problem...
be checking again on AG feedback

another a64 2800+
CAA2C 0505 FPMW
watercooled --> soooooo hottt

benchable

Heyy.... Anybody can guess what's that?


Attached thumbnail(s)

twinmos utt?
should be the bh-5 series...

Evogenix

Wahh 2880Mhz with a 2800+??? Haha excellent results there man. What kinda temps you getting with that amount of vcore? I think that result should put you up in the top few ranking

tampoi, manufacturer 000000?? hahaha no idea what ram is that man

Heh.... Found 2 pieces of TwinMOS 1A4T locally
Shall see how far does it go

Is it the TMSP PC3500 BH5
post ur fsb speed here asap
me planning to get one to test it myself

rlh...UGPM

As you can see from the screen, it's rated PC3200. TwinMOS basic with M.tec chips/KO-6633 PCB

wahh lawwehh...360HTT oOooOo...what HHT multi x3 or x4...definately not 5 rite...

on diverders ahh????

btw good oc results....

sadly no prime results.....

This post has been edited by antonio_zth: May 5 2005, 11:20 AM

Because his prime will sure fail

locally... u mean in miri? which shop?

soul at miri meh???

buy at lowyat lor...

the new venice has SSE3??