Hehe those settings aren't stable at all. I took that screenie minutes after WinXP was installed hence no stability tests yet. I got 3 pairs of 1GB ram to play with now. BH5, BH6 and Twinmos UTT. So many sticks, so little time.

Hopefully I can make 260FSB stable. Will post CPU OC screenie once I get it done.

@DE_Cruelz Good Luck m8. Lend me those ram ler but i think the cost of u sending from syd. maybe cost a pair of good ram oledi

BTW guys venice will be launched near the corner according to ppl in XS its on 15thApril. but still how fast it can reach Msia???

Thanks rzone! Sometimes I wish I were living in my KL house now haha! Can get people to help me burn in my ram too

Btw, might be selling my BH5 and BH6 soon to recoup some money. Hopefully can use that money to get a Digital SLR

Re: Venice, probably sometime during May?

http://www.xtremesystems.org/forums/showthread.php?t=59236

official launch. but still as u said venice maybe arrive here on May.

Heya guys. really need ya help here. I'm a total noob in AMD OCing. Juz bought diz new rig less than a month. Yet, manage to play around wif d FSB to get 1.94Ghz. Attached my CPU-Z screenshot 2 act s a reference 4 u guys. Can sum1 actually help me in OCing diz rig? 1.94Ghz n CPU Temp is 47 Degress. Diz r sum of my primary question s a start.

1. How can we reach the 1:1 ratio? I mean how do we determine that?
2. How can others' AMD 64 3000+ reached multiplier @ X10 ? Mine only X9 wooo.
3. Is high voltage harmful 2 any component of the system?
4. Does all d OC adjustment being take place in Bios? or can I juz manipulate from Abit's OCGuru Software?

Realy need a sifoo in OCing. Lookin 4ward to u guys's replies....

wey when u want to add my oc to chart.
windows based overclock used gigabyte tools
2.5 ghz


Attached thumbnail(s)

1. 1:1 can be set in bios.. ie setting the cpu n ram both at 200 ..
2. multi x10 is for socket 754.. 939 only x9 [not sure bout newcastle]
3. yes..its harmful.. but some rams do like high V at high speed.. same goes to the proc..
4. correct, OC also can be done via s/w.. but s/w OC is for testing b4 setting it in bios

CBBHD 0447UPEW

Bench @ 2.7Ghz

Dun think it's primestable...never test






Cooling : Freezer64 + Delta 5K rpm Tri blade + aircon + tablefan speed #3






Temps:

dang man, that's some very low temps good job bro

is the freezer that good, it seems can beat xp120

Not really that good with the stock fan...it's at least 8C higher at the same vcore/speeds.

Had to ghetto mount the Delta and this was done at an intake temp (probe near the cpu fan's intake) of 18C. Totally whack the aircon until the lowest reached temps.

@sniper...

i see a coolergiant


i think u should be able to get 30s....

but still, it's gotta quiute cool there to get that kinda temps. wat's the ambient temp room there??

i still have a long way to go to migrate to s939

Yeah...was shooting for that whole morning. The best is only 31.063
Need to tweak the mem's more.

Didn't measure as its under aircon....so can safely assume about the same as the HSF intake temp of 18C

that's cool man...with my xp120...idle at 37c...10c higher than urs...same voltage...but my room got no accond la...

Wow, those are very very nice temps!! All of them below 30C

18C ambient temps? You must have a powerful aircond then hehe!

Wahlawwehh...

3000+ winnie....mine is CBBID 05 02 or 03 sumthin n end letter was PWJ or sumthin....juz bought 2 days ago... MSI Neo3 NF3 Ultra(hahahaha MSI lagik)....n 512mb KVR hynix dt-d43....210 rite now 1:1 all stocks...still prime'ing at home...dunno what happend...hahahaha...

Temp is 37 idle n 52 while prime....1.3v...mem 2.6v....

hope mine can o/c about 35 more HTT oso gud 4 me aledi...

Weh PCcrazy.....turun lah ilmu sket....rite now still use 1:1...see what the KVR is capable of.....hihihihi....

Hey guys, about time I posted my results here:



Running 245 2-2-2-8 with Twinmos SP at 3.5vdimm. Only been through one burn in session at 200 3.4vdimm. Need to burn in this sucker more before I get higher HTT

EDIT: Did a few more tests later and swapped my Twinmos between the slots. Memtest is wayy much more stable. Here's a new screenie with 2.8Ghz! Btw, all results were achieved using the stock cooling. Temps shot up to 68-69C while doing 1M superpi.

Here it is:



This post has been edited by De_Cruelz: Apr 14 2005, 06:14 PM

here is my latest result

2520Mhz bootable

on amd64 s754 newcastle 3000+ @ stock HSF

This post has been edited by shadow_dweller: Apr 14 2005, 09:08 PM


Attached thumbnail(s)

nice...izzit 1:1...i'm still trying to pass the 270 barrier...

hehe .. it's not 1T sadly ..

i was looking how far my proc can go.

teh ram timing was pretty loose. and it was on 2T

using cheapo KVR bt-d43 here

This post has been edited by shadow_dweller: Apr 14 2005, 10:36 PM