i dont know is that correct to post at here, please guide me if i am wrong.

recently, my 2 pair team 2x1gb ddr2 1066 just died , i sent it for rma. after 1 month+ changed back 2 pair D9GMH with D9GKX mix IC set.
my setting is like this

what I want to ask all si fu is what program to test ram stability is the best? Cause what i feel so weird is last time i use 2.24v to get this setting stable. but now i use 1.9v to get stable. I already tested with memtest 86+ with 5 run , memtest 500% , and linx 20 runs , still didnt face BSOD until now , is that consider stable?

it should be stable, can try prime 95 blend test max ram used if u want.
for 1080mhz @ cl5, 1.8 -2.0 vdimm will do.
to increase the performance of memory, try lower down the performance level.

prime95 blend (custom memory set to 3200/4000) is the best to test memory stability

I had my overclocked memory tested with memtest 4.00 stable for more than 6 hours, just to fail in prime95 blend test in 3 hours

will try to use prime 95 stress for whole night, thx for answer

Make sure you custom set it to the same as blend settings, but max out the ram to 3200 if possible

This post has been edited by Vigilant: Apr 18 2010, 02:17 AM

question answered. thread closed