does it comes with the extender?
do you want to trade with my Quark mini Cr2 without any top up?
i'm no low baller

PM sent

i'll take it.
but where is your place perhaps i can cod it by tonight.
please give me your gps coordinate if possible

I'm a little late to join in this section(didn't realise they HAD this section)

Well, don't really have a glorious list of lights but it all started off with an ARC-AAA back before they closed-down(before they reopened later on in 2005 or so) from a bulk order nexro held in a now-defunct local overclocking forum. It originally was being bought as a "my keychain light is brighter and more functional" usage but a few years down the road I was thinking of getting a brighter unit, ended up with a Fenix L0D(not sure which version as I misplaced my box and mine had seen better days as a keychain light), again from nexro since he's to be, "the light guy" back then as the "flashaholic" scene wasn't as big as today.

Glad to join in the fun again, I got carried away wif other hobbies but am recently on the look out again for lights to help in my other hobbies(car detailing, needed a light to check swirls), so here I am.

Being thru the AAA keychain light ages, I guess I'm kinda interested to check out some AA or CR123 lights for a change.

This post has been edited by GRexer: Nov 21 2010, 07:33 PM

taking The Bright Side offline for a bit - backup and update to phpbb 3.0.8.

---

Added on November 24, 2010, 3:04 amI am so very very very very very glad I made a master backup..

when I told the auto software installer ( I was doing it manually previously ) to backup everything, it somehow didn't back up any of the tables.... O.o"
Downloading the master backups. 30 minutes.

I will also be moving the forum into its own hosting account, so backups will be faster and easier. this will take some time unfortunately.


speaking of which, caver: original malkoff W dropins were 5000K, after complaints, he changed to 4000K

---

Added on November 24, 2010, 4:56 am

moved the bright side forums to a new account (one it's own),

manually uninstalled most of the mods, making another backup, then updating again.
I'll then redo the mods and we should have a working forum!


edit again: we're back!

This post has been edited by csshih: Nov 24 2010, 05:32 AM

Thanks for the hard work, craig!

hi guys,

anyone use loctite silicone grease 51360 or technisub silicone grease before? since nyogel/kyrtox kinda difficult to source locally.

thanks

rookiedaddy is our greasy guy, let's wait for him to chime in

Use veseline is better then silicone grease.. silicone turn grey / black after use a few times. Deoxit also a good choice.

Reinstalling the forums. sorry for the downtime!

I see...but when it turn to black...is it okay? Im using not only for flashlight..sometimes at connector etc etc (using cheap ace silicon grease love its waterproof property)

but does vaseline has lubricating properties? yea.. thats what i'm experiencing currently with silicone spray lubs.

anywhere to source deoxit?

thanks

Hey guys, long time never post here!

Just now i wanted to swap my battery with my other battery which had been fully charged but i left it in the charger after it had been fully charged for around 2~3 weeks and i suspected that the charger was sucking juice out from my previous 10180 batteries!

anyway, before i put anything into my light, i usually test it with a voltmeter and was SHOCKED when i saw this!



any idea what should i do with it? These batteries are pretty rare and the only way to get it is to buy direct from AW!

anyway, thanks guys!

It is ok, just it looks dirty when u touch it.

---

Added on November 28, 2010, 4:09 amYes, veseline can lube the flashlight, should be better than the spray sillicone, can buy from LYN member polkiuj, can also look in his thread here http://thebrightsideforums.com/viewtopic.php?f=20&t=73

---

Added on November 28, 2010, 4:13 amHi, long time , really.

You missed today's gathering http://thebrightsideforums.com/viewtopic.php?f=25&t=424

Yeah, I think your charger drain the battery, and it was so low, the battery is probably dead, and most charger will not charge it. You can try charge using another li-on battery, connect + to +, - to -, for 10 seconds maybe, to bring the voltage of your 10180 to about 3V,then try charge in your charger. Hope this help.

This post has been edited by susuman: Nov 28 2010, 04:13 AM

Yeah i noticed that when i ter-read the chatbox there but even if i knew about it, i doubt i can go though, half-way through my SPM now LOL

yea i just inserted the battery into the exact same charger which drained my battery and it is able to charge it back. i left it there for 5mins and removed it and the battery reads 3.8v now. Now i'm wondering is it even safe to charge up the batteries?

Wow, your charger is able to charge something below 1V?! amazing, what charger is that. My guess is safe, bcoz over discharge will shorten the lifespan/capacity of the cell, overcharge will make the cell unstable/dangerous.

I used the nano charger than came with my Wee. Gonna charge it to full capacity tomorrow when i can actually monitor the whole process. Battery currently reads 3.65v

guys can recommend me any shop that selling medical pen torch or penlight...

Hi ebal88, looking for a small light to check throat infection, eyes and such?

Check out this website here = http://www.lelong.com.my/merchant/gadgetworld2u.htm
They have a local store in Subang and you can go over and have a look at their recommendation.

My recommendation = Fenix LD01 (3 brightness modes)

Or here: 4Sevens Flashlights: http://forum.lowyat.net/index.php?showtopi...post&p=26691765 = List of lights Polkiuj has in stock.

My recommendation = Quark Mini AA-2, Preon Revo (3 brightness modes + hidden)

This post has been edited by pseudoblue: Nov 29 2010, 09:56 AM

hi guys,

any sifu here used any pockey clip for Quark Mini 123?

Will the Fenix 1xAAA clip fits? It shorts of 6mm in diameter though.. wonder whether it fits.