Tried loosen ur trfc oledi? Timing as at 800?

How bout trfc value? Mine can achieve 900 still at 5-5-5-15 So might be due to ur trfc value..

Mine is at 195 and 2.2v No orthos from me juz use SuperPi 32M and it pass Might need a better cpu cooler if wanna orthos it as run at 2.7 the temp is reaching more than 65c

Dunno what rev and oledi wrapped it wif heatspreader Juz recently know that there are some rev of the fp-y5

This post has been edited by za_az: Mar 10 2008, 11:27 AM

@ben3003, u oc through bios or windows? If bios, there's an option in the ram section name trfc value Default for mine is 75ns or might as well for others... Need to loosen it as we oc the ram.. For value ram, should be at 127.5ns or 195ns

Try 127.5ns first, then try oc more... If not working might as well try 195ns one

@ben3003, >>HERE<< a SS of same mobo bios as me, note pic taken from tf7050-m2 review in hardware section credited to windwithme You can see got Trfc value for each ram slot..

Dunno more about intel mobo bios so might unable to help if not found the trfc value in ur bios Might as well wait for intel ocer if still din find it

Thanks for da update Any suggestion for our ocer here to oc his ram more?

When u increase the cpu fsb, then the ram clock will increase oso.. Then how bout ur current setup at 3.0 Ur ram ran at what speed? Or u juz messing wif the multiplier, then ram speed wont increase i guess..

Tho, i'm not really know how intel oc works So might cant help much

Try adding more vdimm

2.3v is not normal 2.2v is oledi on high side for da kvr

Agreed @ben3003, any MAL setting on ur bios or should i say intel bios?

Default MAL is 6, and if ur bios got it try either 8 or 10 Better if the vdimm is lower than 2.2v to prolong its lifespan

@ben3003, 5-5-5-15 not stable one ah?

Bumping this thread, still wif my fp-y5 and wif an oc by me Its not impressive tho

Dun remember edi But should be at 2.1-2.2v as i never pumped more than that