Outline ·
[ Standard ] ·
Linear+
Hynix RAM Discussion
|
sjn hassan
|
 Feb 6 2006, 12:17 AM
|
|
QUOTE(mfa333 @ Jan 25 2006, 11:09 PM) my tp default timing is 3-3-3-8 but not stable.after i change to 2.5-3-3-6 then only ok...why arr?this ram got prob dual channel?? btw,what mobo do u use?i heard nf3 got incompability with this ram..nvr heard abt nf2 yet.i'm using nf2 mobo anyway... what's the problem??i'm using MSI K8N Neo2 (NF3 chipset)..now running at 250 @ 2.5-3-3-8 @ 2.7v.Mine is 2x 512mb Team XTreme DT-D43 http://valid.x86-secret.com/show_oc.php?id=69396** how high this ram can go actually??  This post has been edited by sjn hassan: Feb 6 2006, 12:19 AM |
|
|
|
|
|
sjn hassan
|
Feb 6 2006, 12:59 AM
|
|
|
QUOTE(newbieockids @ Feb 6 2006, 12:56 AM) max em out at 3-4-4-8 timing.. set ur VDimm to 2.8V..  with those setting...can get 270MHz??  |
|
|
|
|
|
sjn hassan
|
Feb 6 2006, 06:57 PM
|
|
|
QUOTE(jinaun @ Feb 6 2006, 01:04 PM) i'm using TP-D43 too (1GB per stick size) running at DDR400 at 2.6v at 2.5-3-3-6 why don't U push it higher??  |
|
|
|
|
|
sjn hassan
|
Feb 10 2006, 09:09 PM
|
|
|
QUOTE(satanhead2003 @ Feb 10 2006, 06:02 PM) yup... over 3.1v is considered high lorr... 2.9 still overload but not high. 2.7v is the highest in the whitepaper, but d43 operates best at 2.8 - 3.0 . i'm not worry to put 2.9 or 3.0 as it carries LT warranty. BUT..no more warranty for BURNED chip  |
|
|
|
|
|
sjn hassan
|
Feb 11 2006, 01:15 AM
|
|
|
QUOTE(Mr_47 @ Feb 10 2006, 10:57 PM) i never heard something like ram burn! heeheh.me to.never heard burn when OC but my friend burn his RAM when silap pasang.  which will burn 1st if overvolt?? This post has been edited by sjn hassan: Feb 11 2006, 01:16 AM |
|
|
|
|
|
sjn hassan
|
Feb 14 2006, 08:45 PM
|
|
|
QUOTE(satanhead2003 @ Feb 14 2006, 05:49 PM) have a question here.... kvr -> 250@3-2-2-5-1T ocz -> 250@3-2-2-5-1T any bandwidth different? any link to show dis? explained by KilJim..as long the speed+timing are same..then, there is no perfomance diff between both ram QUOTE(-vip3rleon9- @ Feb 14 2006, 08:11 PM) i'm still wonderin why ky dt-d43's can't run higher than 239mhz on 3-3-3-8.. hm.. a little help here guyz? =) 1. what HTT multiplier did u use??try to set to 4 or 5 2. have u try to increase the VDIMM?? |
|
|
|
|
|
sjn hassan
|
Feb 14 2006, 11:22 PM
|
|
|
QUOTE(Irishcoffee @ Feb 14 2006, 08:44 PM) OMG juz check out my ram i'm using 1 pcs DT-D43 n 1pcs BT-D43 so hav problem when OC? Supposed to be no problem..BUT eg: 1. let say DT-D43 can run 250 and BT-D43 can run 270.So one of the stick may limit the another one.U have to run at 250 only coz DT can't run up to 270. 2. both can run at 250MHz. DT can use 2.5-3-3-6 but BT 3-4-4-8.so u have to sacrife to run at loose timing can u get it?? QUOTE(-vip3rleon9- @ Feb 14 2006, 08:51 PM) 1. tried adi.. my htt is between 1800 and 2000 2. yupz.. i have tried 2.8v n it's still the same.. haha.. help ya.. what HTT multiplier did u use?? |
|
|
|
|
|
sjn hassan
|
Feb 15 2006, 08:48 AM
|
|
|
QUOTE(Hoodlums @ Feb 15 2006, 08:37 AM) Mine is Hynix TP-D43.. Good as Hynix DT-D43 or not? Hehehe at this time don't try push the RAM because I'm waiting for new PSU TruePower. If not mistaken...for previous test..old batch is better than TP lorr..normally u can get 10-30MHz without increase the vdimm |
|
|
|
|
|
sjn hassan
|
Feb 15 2006, 10:52 PM
|
|
|
QUOTE(syapl @ Feb 15 2006, 04:56 PM) my dt-d43 cant run with my bt-d43 on dual channel.......  sad  give me u'r BT-D43.then i'll try it |
|
|
|
|
|
sjn hassan
|
Feb 16 2006, 08:31 PM
|
|
|
QUOTE(tAmp0i @ Feb 16 2006, 08:11 PM) I've got some spare time just now to test out the Kingston TP-D43 512MB single sided (which is only one side loaded with the chips) on a nForce2 platform. Ran out that 240MHz 2.5-3-3-11 is error free at 2.8v and still going, doubt that it could do better on A64 platform  kasik "dera" itu ram kaw2 |
|
|
|
|
|
sjn hassan
|
Feb 19 2006, 06:24 PM
|
|
|
QUOTE(soulfly @ Feb 19 2006, 05:35 PM) Command per clock (CPC) ON = 1T Command per clock (CPC) OFF = 2T not sure if the Intel's PAT enabled/disabled is the same thing or not 1T or 2T is only for AMD64 right?? |
|
|
|
|
|
sjn hassan
|
Feb 22 2006, 12:43 AM
|
|
|
QUOTE(Mr_47 @ Feb 22 2006, 12:03 AM) mine all 3x 512 doublesided! why??mine also double sided.So far can get 250 @ 2.5-3-3-6 with 2.8v.I think can get higher if i can increase the vdimm This post has been edited by sjn hassan: Feb 25 2006, 12:29 PM |
|
|
|
|
|
sjn hassan
|
Feb 24 2006, 09:50 PM
|
|
|
QUOTE(zahri @ Feb 24 2006, 04:52 PM) just checking out, KVR BT-D43 selling for RM 180 ? is it worth it ? thanks. 2nd err??If can achieve more than 260MHz..than is OK laa.but quite xpensive |
|
|
|
|
|
sjn hassan
|
Mar 2 2006, 12:44 PM
|
|
|
QUOTE(nuox @ Mar 2 2006, 02:10 AM) i do not understand,,, mine is HY5DU12822CTP-D43,,, Dt OR BT? another thing is how come my ram is KVR400X64C3A/512 ... is it new type of ram,, what i notice the X32 is dua dua side ada chip while mine is only one side,, got any ideas? u'r is new batch..it's CTP not BT or DT. KVR...is Kingston Code.telling that it's Value ram.64mb per 1 chip.total size is 512MB.and it's CL3 yer laa... 512 / 64 = 8.SO only 8 chip (single sided) 512 / 32 = 16.16 chip is used.So it's double sided |
|
|
|
|
|
sjn hassan
|
Mar 29 2006, 08:42 PM
|
|
|
QUOTE(zahri @ Mar 28 2006, 11:29 PM)
i am planning to get another 256mb Dt-d43 , but i cud only find bt-d43,
Wud it work well with my existing dt-d43, and cud i achieve 250 with both rams ?
Perhaps.But better get another DT-D43  |
|
|
|
|
|
sjn hassan
|
Apr 24 2006, 10:54 PM
|
|
|
QUOTE(raymond5105 @ Apr 22 2006, 09:28 PM) Anyone using the BT-J chip here?Heard that it is also quite o/cable. last time i'm using the chip..not bad..can get DDR4xx (can't remember) even it's DDR333  |
|
|
|
|
|
sjn hassan
|
Jul 19 2006, 12:36 AM
|
|
|
QUOTE(QD_buyer @ Jul 17 2006, 09:26 PM) Hi! Proud owner of 2 sticks of Infineon Hynix 512MB! Anyway,can i OC using this? Proud??how high it can OC??try lorr |
|
|
|
|
Quote
0.0186sec
0.60
7 queries
GZIP Disabled