Just finished burn-in my BT-d43 with memtest (dos) now. Before, the thightest timing i can boot to windows is 2.5-2-3-8 . After 9 hours of burn-in, guess wat. I'm now at 2-2-2-11. But, windows version of memtest giving me error around 14-15%. Not bad. will burn this baby again, tis night.



This post has been edited by satanhead2003: Jan 25 2006, 06:12 AM

memtest ( dos version ) just let it run all night, but modify the timing from memtest ( advance option--> change all ). StarNet, my proc is XP-M ( default 133Mhz), dun wan to oc the proc while burn in, just want to burn the mem, not the proc. . but if u wan sshot showing 1:1, 2-2-2-11, can give oso. i've just tried it.

actually tis is how i do it,

set the vdimm to the lowest, set the timing to the lowest can boot to dos, no need to set to boot to windows, configure memtest advanced option--->change all, set 2-2-2-2. After 9 hours, tis is the result. default my BT-D43 is cl3. Now can boot to windows at cl2, oledi very happy. Gonna push the fsb tonite, how much it can do on 2-2-2-X.

sshot on 1:1



This post has been edited by satanhead2003: Jan 25 2006, 06:43 PM

I'm not sure it's the right way to burn-in oso. But, after i changed the timing in memtest, it wont reboot / hang. Just seem to run as usual. at dos memtest, cannot change vdimm. i just set vdimm at 2.6v, which is the lowest at cl3 can boot.

I wrongly stress my ram last nigt. Looping on test4 for 6 hours. (tertidur punya hal). But, after 6 hours, i just test what improvement been done. Sadly, no improvement on higher fsb. . But after playing wif the timing, guess what? I now been able to boot to windows at timing 2-2-1-2. Hmm.... time to go to work. . will post sshot later.

sshot


This post has been edited by satanhead2003: Jan 26 2006, 07:33 PM

yaa... i know, 11 is the best for nf2. just wan to show the thightest timing i can get after burn-in.

Now ah? sadly i sold my mobo n proc n changed to 754 platform. Dis 754 mobo, lacks vdimm, cannot achieve as in NF7-S. . onli managed to get 250 at 3-3-3-8, where it's 2.5-2-2-11@250 on sc A.

This post has been edited by satanhead2003: Jan 31 2006, 08:26 PM

Yup, just standard.

both still d43.....

yup. mine best at 2.9 ( as in siggy ).

try 2T bios instead. mebe TP-D43 will limiting ur oc as it doesnt have good "reputation" here. but, it's best to try.

y? izzit supposed to? i run 2.9v... not hot oso

yup... over 3.1v is considered high lorr... 2.9 still overload but not high. 2.7v is the highest in the whitepaper, but d43 operates best at 2.8 - 3.0 . i'm not worry to put 2.9 or 3.0 as it carries LT warranty.

have a question here....

kvr -> 250@3-2-2-5-1T
ocz -> 250@3-2-2-5-1T

any bandwidth different? any link to show dis?

care to explain abit? i'm getting a new ram but wanna have some response frm experienced one.

oooo like dat.... thanks alot dude... loud n clear

what ur vdimm n timing at 231?

try to burn-in a little bit. mebe can achieve more or tighten the timing. but no guarantee tho. i posted "my way" of burn-in for d43 ram in my earlier post.

ur ram hit the wall...