waa.....all nf2 user kaa??......nf3 user?....for those with dfi lp ut 250gb, need to ask sumthing here......ok first of all, my RAM also based on dtd43(kvr)........for me this RAM is good......currently running fine with 240mhz 2.5-3-3-8 1T(2.8vdimm), memtest 6loops passed and +/-7hours priming(blend mode)......the problem is here, i cant even load to windows if i set my HTT(FSB) to above 240mhz......FYI, i used divider when i try to run more than 240.....in this case, i try 250mhz HTT(FSB)......and i set the dram:fsb ratio to 6:07, thats mean my memory speed is just 214mhz......i do this becoz wanna find the highest possible speed for my proc.......so i let my dtd43 at 214mhz,3-3-3-8 1T,2.7vdimm.......for my proc.,initially i set the multiplier at stock(10x) and vcore 1.560(1.500x104%)......but i stuck at nvraid bios,then my pc reboot, then i try to increase my vcore.......my ram setting is still like i mention above (214mhz)........i try to increase the vcore untill +/- 1.900vcore(a bit high)......still stuck at nv raid bios....then i put back my vcore at 1.560 and i set the multiplier at the lowest possible....in this case i put x5......so the speed is 1250mhz......still i cant load to windows.....FYI im using A64 3000+(stock clock at 2000mhz)......in this case 1250mhz is still below my stock clock.......with above stock voltage (only 0.06v xtra) and above stock HTT(stock is 200mhz, in this case i set my HTT(FSB) to 250mhz) but at snail speed (1250mhz, below stock speed).......i cant get into windows...........my ram setting is still like what i mention above (214mhz,3-3-3-8 1T at 2.7v)even i did increasing the vdimm to 2.8........still stuck at damn nv raid bios screen.......can anybody explain to me why? b4 i try to oc my rig......i did alot of research bout A64 and my board.......every tips ive tried.....but failed......this is not my first time xperience in oc.......b4 this i did oc my axp 2000+ on nf7-s.......so is it my mobo problem or my cpu is holding me back against above 240mhz fsb???coz in dfi-street.com forums.........many forummers easily can boost their fsb(HTT) to 250mhz even can reach 300mhz........so anybody plz help me.......

xtra info:-
A64 newcastle 3000+ currently running at 240x9,2160mhz with stock vcore
KVR dtd43 240mhz, 2.5-3-3-8, 1T at 2.8vdimm
beta bios by oscar wu 31/3/05
(this setting is stable memtest86 6loops passed and priming(blend mode) for +/-7hours)

tq in advance

tq dude,
anyway ive tried it (ldt multi.) but cant work lorr......set it at 240x3.....HTT=720......DDR HTT=720x2=1440.....the optimal n safest range is 1200-1600 DDR HTT......but oscar wu said(from xtremesystem forum) certain board can max out at 1800(900HTTx2)........but the safest range is still 1200-1600 DDR HTT.....actually its a bit hard to understand bout this HTT thinggy........just follow wateva the expert says....

like what ive mentioned, i try to archieved 250 speed lor.......but i need to make sure my proc. can be push until 250fsb.......but it seems hard for me to archieve it....becoz i cant even load to windows at 250mhz HTT(fsb).........anyway try to read back my previous post for details.
for vcore, waaa yupp its really damn hot hehehe......but my rig still cant load into windows at this vcore......hehehe......waaa sure kaa the safe voltage is 1.65 only??.....hehehe didnt knew it.....tq anyway.....


off topic oso......i get the bios from dfi-street forum.....posted by angry games......bios factory subforums......check it out........but i guess this bios holding me back from archieving 250HTT hehehehe......dunno laaa......just guessing.......


tq for quick respond dude.......n can u tell me bout your setting........did u enable cpu thermal-throtling??.........how bout your dram setting(with nearly 20timing need to set ).........voltage n everything??.......mind to share buddy......tq in advance......

not sure.....jess1313 from dfi-street.com(he is one of a beta bios modifier for lp ut 250gb).......for ocing better disable this option in bios......i oso not really know what is cpu thermal throtling for.......

p/s: i guess we've already off topic......hehehe......this thread is only for kvr dtd43 ocing....hehehe......so to all moderator, im so sorry