well... i used 2.5-3-3-7-1T at 2.75v for 2x1GB and it works fine so far

This post has been edited by jinaun: Jan 16 2006, 05:36 PM

i'm have TP-D43 parts

i've set default in bios to use SPD settings..

but as you can see.. the memory timings and the SPD table is different.. esp at the RAS precharge timing...




Attached thumbnail(s)

i'm using TP-D43 too (1GB per stick size)

running at DDR400 at 2.6v at 2.5-3-3-6

i can't it seems to be the limit of TP-D43

alot of ppl saying it will run at DDR500(250mhz) at 3-4-4-8,2T at 2.75-2.80v and HTT speed 250mhz at htt multiplier 4x..

but onli come out blank screen..

maybe becoz the stick size is 1GB, thats y not stable enough to run at the speed(DDR500).

some said double side better as the memory controller can access the memory banks independently, thus better memory utilization.

some said single side better coz stability in OC

can any1 clarify this?

my ctp-D43 works well with athlon64...

urs bad batch kut?