mfa333@

u can put at any slot... or u can try 1 by 1 at every each slot... if all of them givin u da same stable setting... then set them gothether la...

actually... for tellin slot 1 is better than slot 2 or 3... its more like 'syirik' to me... but somehow ppl will try it...

*ops.. fogot la... wat 'syirik' in english???


for who still confuse...

i think all d43 will have SPD at CL3... but usually u can set them to CL2.5 & CL2 ( only some stick can but da fsb will limited to around 200 fsb only )

most ocer will use 2.5-4-3-X or 2.5-4-4-x

X = 11 (nf2)
= 5 (p4)
= 6/7 (a64)

2.5-3-3-x usually wont go hi... will end at around 210-235 fsb...

some can do 2-2-2-11 on nf7 on certain bios... but i think its bios wit cpc off ... can get tighest timin but u oredi decrease da bandwith... so same la...

so set ur d43 to 2.5-4-3-x ( tighest ) or 3-4-4-x & oc as hi u can go...

* for 512mb stick on nf2 platform... u need to CPC OFF to oc futher... let say for normal case u will end at 230~240 fsb... wit cpc off will cont oc till 250~260+... but again u oredi decrease da bandwith... but u got no choice... so u need to CPC OFF...


epsilon992

dats is burn in method... but as i kno... only winbond chipset can be burn in... no other chipset can go higher tru dis kind of burnin...

from u post... u say u use 3.3vdimm on ur d43??? AFAIK... d43 will make error if u put 3.0vdimm & higher... or can say 3vdimm is max da ram can tolerate...

on normal case... kenot...

but on nf7 or nf7s... got 1 bios wit cpc off ( if im not mistakenly la - im not nf7s user )...

wit dis bios... da cpc will automaticly turned off...

then can set 2-2-2-11 but with less bandwith coz of cpc off...

other brand nf2... kenot la... even u cpc off...

so da answer can & cannot la...

EDIT: there are some cases where d43 can do 2-2-2-11 not on abit board... can pass memtest but not real prime...

This post has been edited by alvarez_: Apr 12 2005, 12:30 AM

epsilon99@

u mean now at 3.3vdimm ur d43 dont have error ar???

CwL@

ur d43 oso can stand 3.2vdimm witout error???

got any improvement (fsb) after burn in or just makin da ram can 'tahan' da hi vdimm?


mfa333@

yerps... dats da best timin for nf2 wit ur d43... its not too bad thou if u can get it runnin at least 250 fsb...

thermal-trothing will let ur proc run in slower speed of the bios detect dat ur proc too hot... if im not mistaken la...

ok... actually... if u really want to waste long time to burn in ur ram... i advice u have winbond series of ram... these ram more worth to burn in than d43...

ram like bh5 or UTT will gain 5~10mhz by long burn in...

@L

short burn in are like few hours to few days... long burn in is few weeks to few months.. or maybe few years...

so strange nia... i have test few d43... all of them 'busuk2' pun can get 240~250 fsb... ( 2T if dual sided stick )...

maybe need a good bios then...

nice to hear got d43 single sided for 512mb stick... hopes it goes well like 256 stick... way up to 260+ fsb...

yup.. i agree..

D43 with a good bios ( of coz pair with good nf2 board) will easily hit around 240 fsb usin 1T or 250~260+ fsb usin 2T...