gosh..

the 2.9v is vdimm >_>

if u guys r playing at freaking high frequency w/o going above 2.8v, the worse case scenario would be juz windows got corrupted..

but beyond 2.9v [ie goes 3.0v++] a ram cooling is recomended [blowing fan etc]

btw, my dt-d43 dont go beyong 265 @ 2.5-4-4-11 1T ~_~;;

wan to ask.. is DFI NF4 Infinity and Abit NF4 AN8-Ultra is compatible wit KVR?? 

why my bt-d43 can hit 230 only????? isit really bt-d43 dont like nf7?    

Its better to use 1:1 because nForce2 doesnt like dividers at all.

What about the cpu is running at 400MHz while the ram is running at 300MHz (Of course with divider), and another cpu is running at 250MHz while the ram is running at 250MHz, which one will be faster?

Condition: only the frequency of cpu and ram is different

How's the performance of TP-D43? Is it as good as its brothers?

instead if demanding with such emoticons perhaps u should do a little search in this thread
it's already been posted before

check post #719

i have 2x512MB Hynix Double Sided RAM @ Dual Channel

-RAM is Double Sided
-Chips on 1 side is DT-D43
-Chips on the other side is TP-D43

will this affect OCability if 1 piece of RAM has diff chips on both sides?

what exactly are u trying to point out with that statement? 

no problem burning the rams, just as long as there are no burnt marks or anything visible 

Desktop hehehe..
After Google Hyundai Electronics = Hynix 

Mine also Single Sided. 

my fsb is still low 212

, but multiplier is at 9

yeah..if ur proc did not hit the wall, u can push ur ram fsb to the highest.

but if u stuck at 212, then lower ur multi and up ur fsb la..