lol.... Mine is E revision....

Define "kind" Seriously... What do you mean by "kind"? I would sure like to get my RAMs higher.

---

Added on March 3, 2008, 9:33 pmYou still got yours to 800MHz right? Iirc...

This post has been edited by Dreamworks: Mar 3 2008, 09:33 PM

alll factory tuned rams which are 667Mhz can do 800Mhz. Only thing is how much Vdimm is needed for this bump. (too much tokyo drift)

E revision is just.... u know.. shit.

Kind ah.. kind means u have to slowly pump the Vdimm and push it up la.. not jerk it immediately...

Hahaha..... I juz rembat VDimm 2.30v @ 800mhz..... I know its very.... B4 dis, cannot reach 800mhz...

---

Added on March 3, 2008, 10:08 pmYup.... I juz play2 wit it.... Then suddenly can boot up... Yaheeww...

This post has been edited by rozz_1291: Mar 3 2008, 10:08 PM

2.30V for ddr2 800..... hmm rozz sell your ram to ebay la

Wat 2 do.... E revision... Planning 2 get a diffrnt revision... Hav 2 hunt it 1st...

Might as well just get a non-Hynix since they can generally hit at least 800MHz under 2.0v, unless you can still get your hands on Rev. A or B

This post has been edited by Dreamworks: Mar 3 2008, 11:59 PM

very true... but the rev A and B ppl wont be sellling their gems anyways, that leaves us to not even discussing the possibility of finding another revision which will do 1000Mhz easily.

2.3v+ still safe? If safe i might wanna try, i got 1 ram cooler by AllnGap one keep on blowing on the ram...

With active cooling, 2.3v should be alright. But it's best to stay 2.2v and below for Value RAMs

for rm85 a piece u can overclock the ram like me..
or if u look at xtremesystems forum, there are forumers that pushed the supertalent's fp-y5 to 1.4ghz @ 2.7v

theres no point doing an OC like 1400Mhz using 2.7V when the purpose is to use it everyday. And always remember, this voltages are only probably 1-2 hours thats it. Its suicide to run that even for 6 hours

By the way on another note, i believe your Team Elites can do 1100Mhz on 2.3V. Done it before Try it.

since u got an active cooler for the RAM, u can try to increase till 2.3v... but of course keep it as low as better lo~

wow 2.3v means +0.5v, sound risky lol. Can i open 24hrs 2.3v?

yup but the point is that the bata's supertalent fp-y5 that im currently using rite now is very good because the overclocking headroom is very high tho it sucks at cl4 overclocking...
2.2v daily it's not a problem because supertalent uses brainpower pcbs

p/s my team elite can go far with 2.2v on dividers.. but i only care about 1:1 oc

This post has been edited by ben_panced: Mar 4 2008, 02:24 PM

just tried 2.2v 900mhz still no luck lolz, scary to try higher, i wan a stable one and not riksing of burning my rams in anytime..

yalor, but u know whats the prob with rams like this ah, its like feeding a boy from young, and keep on feeding him until he is so fat, and when he is fat, u have to keep on feeding him that much, and when he want more, u feed him more, and one day, he kaboom. and u send him for RMA you got my point

Loosen the tRCD timing and try again, FP-Y5 can go higher with tRCD at 5 or 6.

Not kaboom... More like a heart attack

no lar, i trust rams with brainpower pcbs..
btw, i fed 2.1v to my previous pair of team elites for over 1 year.. yet no problem arises

bro its not about the PCB that i am worried about, its the Chip itself. 2.1V is nothing, when u say ppl have done 2.7V, now thats something for me, at the moment i am running around 2.0V.