good advice pccrazy,

thanks...

will loosen the timings and retry

but do i need to lower my multiplier as it is at 9 ??

yes lower the multiplier and hook up some fsb is better than low fsb + high multiplier as 11 or 12

of couse..bandwith man..bandwith

my fsb is still low 212

, but multiplier is at 9

lower ur multi to 8..and up ur fsb

stay at 9

but pump more vcore then crank up the fsb to 220-250!

yeah..if ur proc did not hit the wall, u can push ur ram fsb to the highest.

but if u stuck at 212, then lower ur multi and up ur fsb la..

what a good combo from me and old kulus hehe!

BTW: if still stuck stay at 212 then push more ram voltage to 2.9 max and set the ram timming to 2-2-2-11 and lower till get the best fit!

This post has been edited by Mr_47: Apr 18 2006, 10:35 AM

can DT-D43 do a 2-2-2-5 timing?

yeh im running mine

2.9 (2-2-2-11) with 220 fsb!

see my siggy !

yours 2-2-2-11 but not 2-2-2-5... can it do a 2-2-2-5?

okok sorry!

btw the best for nforce 2 board is 2-2-2-11

but for amd 64 board i dont know la bro...

again sorry.

erm...
i tried doing 2 - 2 - 2 - 11

but only managed to do 2 - 3 - 3 - 11

pump more voltage!

i want to find the 1gb ramm kvr dt-d43 dual side.
cause mine got ct-d43

how to i improve my oc
timing 3-4-4-9 at 1t
268 x 9=2.4ghz
proc amd 64 2800 754(2.4ghz)
9 is max multiplier provide in my mobo..

so my target to get 2.5 to 2.6 ghz any suggestion...
i allready try to get 2.35 to 2.5ghz
but when play games would be hang...plzzzz

always pump more voltage!

Perhaps we should stick to the topic, if you want some help overclocking the proc why not try the AMD64 ocing thread instead. You will get better reponse I believe.

i have pumped 2.9 volts

or do i need to pump more ?

can you pump more?

my max only 2.9 loh!

my max also 2.9v

maybe get the ocz booster, and boost the volt up