I dont think he know any of this.. even you ask him, he will sure say no problem.. we`ll do that for you which you dont even know whetehr its done or not......

thought so...even if you tell them also they sure say can....

ya... there`s a way though.. a quite rude way...

by black and white.. ask him to come out with quoation, spec, then hold his money say 30% after finish job.. see if he do it or not.. see his bill to powder coat shop.. if no, then dont pay him 30%

Tell him straight to scare him a bit.. say your friend in other state is doing powder coat, but hard to do in KL.. so ask him to check....

Last week finally decided how the grill will like to be and informed the two contractor for quotation, but endup both also ask me to dropby and select the material myself than only provide the quote.
They indicated that will be much more ease for them.
Same goes for my gate too

may i know what paint system is that?

going to install grilled at my hse, do study now. thks!

Do you mind to paying it?

anybody using hammerite paint for their grille ?

Hi everyone,

May I know anyone had install Grille from this Delux company before?
How much they charge on wrought iron door or window?
http://mydelux.com.my/products/door/

Any feedback from the grille or their service?
Thanks in advanced.

i assign them to do skylight for my yard. Very friendly. My neighbour do wrought grille from them. Very nice. Cost them around Rm9k for the whole house.

how much for your skylight?
9k for house grill, that is expensive...

I was quoted RM19/sq ft. I sign up with them during homedec last May. I also think its a bit expensive for the wrought iron, but my neighbour say he trusted the company.

Hi guys, have a look on my quotation see ok or not ? i think abit expensive le..


Attached File(s)
 Q_0246.pdf ( 116.05k ) Number of downloads: 1084

not a bit but very expensive

its expensive...

my gate 16'x 6'-7.5', with ss track, conceal brackets cost rm3800 not include the timber(+-rm1000).



This post has been edited by skng03: Jun 20 2011, 08:26 AM

Humm, in your opinion, the quotation price should be around??

---

Added on June 19, 2011, 12:46 amWaa~ really sweat when I saw 9k! You know the price per sq ft for door grille and window?
Btw your neighbour house is terrace?semi-D or banglo? Maybe his house got alot windows or doors.

This post has been edited by Kaitlyn: Jun 19 2011, 12:46 AM

the spec is not clearly stated...

its akin like this

to supply a car with 4rubber wheel. Front wheel capable to steer, equiped with 4doors bla bla....

and I supply kancil also can, supply toyota also can, supply BMW also can.........

May I know how much they quoted your neighbor for wrought iron on door and window? I thought the per sq ft price for door & window might be vary. Hope to get ur reply soon

i din ask further, but u can calll them up and ask for site visit. Its a double storey intermediate... Quoted RM9k

Wrought iron is an incorrect description.
It is not wrought iron.
It is mild steel that looks like wrought iron.
Don't be fooled.
Only in some Western countries there are still some craftsmen who make wrought iron.
They do this by immersing red hot mild steel bar into the oven filled with charcoal
The carbon content in the steel is increased in this manner turning it into wrought iron.
He then has to hammer it into shape.
You can imagine this is such a labourious process it can be very expensive.

In Malaysia no one does that
So wrought iron is only mild steel bars that are rolled and hammered into shape.
Thats why it still rust and has to be painted.

Wrought iron because of its high carbon content does not rust.

---

Added on June 20, 2011, 1:24 amI have used hammerite for grille
It is very difficult to apply as its really tacky
And you cannot add thinner nor dilute it with spirit
If you do that you will spoil the paint
But then the finishing job is good
And lasts a long time
I used hammerite on my aluminium sliding door because i didn't like the aluminium color
Normal paint won't stick on aluminium but hammerite will
It gives it an anitique finish and that was what I was looking for
Be patient
Needs time to apply
And you probably will need more brushes too.

This post has been edited by chisel55: Jun 20 2011, 01:24 AM

I'm also using Delux for my backyard skylight - signed up during the Perfect Living in April 11. Product: Sukaiyo solid sheet at RM18 psf with mild steel structural frame.

So far I'm satisfied with their after sales service, as I've called twice to complain on the leaking of the polycarbonate. Both time, they were quick to resolve the issue. Installation quality was so so, not impressed because it shouldn't be any leaking in the first place.

But I like the Sukaiyo solid sheet (imported from Japan) which I got it at RM18 psf. The quality is better than local solid sheets which are about the same price too.

I did asked for the wrought iron grilles, but their pricing were on the high side. At the end, I engaged Ivy from Three Kim for my gate and grilles.