Broadband provider
ISP/package: TMNET Streamyx 1Mbps + Voice Deal Combo
Location: Taman Johor Jaya (JB)
Have you called your ISP's helpline?: No

Anyone knows how come i cannot connect to the wifi modem admin page if i am connect to the modem via WLAN connection instead of LAN connection?

i can only configure the router if I am connecting thru the cable.........why ah?

I had enable the management function via WLAN on port 23 (telnet), 80 (http) or 21 (ftp) all cannot........

I am having the same problem as well. Mind someone share some light here. Is this by default or something can be done to rectify this situation?

r u using tmnet modem?? i think there is some setting there for u to set which ip will get access to admin page.. its been a while since i using that modem...

that only apply to lan but not wireless, so annoying leh, sian!

You only can open the admin page by connecting cable only.
While you are using wlan, you cannot access to admin menu, the Innacomm W3100 style.

Use cable n keyin ur gateway ip

is that so? i can telnet using wireless to my modem router b4...

siapa pun tahu... pls refer to the question

This post has been edited by kels83: Mar 29 2010, 06:04 PM

i think MX510 is answering to what TS is asking.. use cable 1st so that u can make setting to connect via wlan..

please read the question carefully



I can confirm TS already access the router using the LAN cable, what the problem he facing is... unable to access the router using wlan instead of LAN or using CABLE, i can understand because i using the same model of modem, very troublesome. please correct me if i'm wrong

and we so far don't found any setting that let the router access by wlan inside the router setting, no matter fixing ACL IP, enable web ftp or telnet still cannot access

This post has been edited by kels83: Mar 30 2010, 09:09 AM

I do not own this modem nor does I encountered it before but I'm curious. What's the IP range for LAN & WLAN? Does it overlapped?

This post has been edited by Miokawaii: Apr 3 2010, 04:53 PM

I too have the Innacomm W3100 supplied by streamyx..its a really stupid modem, one cannot access the modem configuration page over the wireless. not only that even the bridge mode on the modem doesnt work which makes attaching your own wireless router difficult..i think even the port forwarding doesnt work properly..i am using it with an SPA 3000 and inspite of forwarding the correct ports..the router is not sending incoming requests to the SPA.

look under admin page, wlan>access control

afaik...it's for security purposes..so unauthorizes personal can't access u'r router via wireless

no use one, that one only other ppl on internet who knows ur router public/WAN ip then can access, it is for another pc on internet to access not from local wireless clients.....

---

Added on April 11, 2010, 12:53 pmthe most irritating part abt this modem is that it does not support port forwarding!!!!

This post has been edited by kindaichi: Apr 11 2010, 12:53 PM

it does. i hosting my dota all the while using this modem, just cannot remote into the admin page using wireless only... sigh

can u show us how u do it??

i want to know tat this modem.is it surf net fast..i feel surf net slow but downloading ok..how u all?

This post has been edited by Moogle Stiltzkin: Jul 14 2017, 09:46 PM

tat w3100 really slow at surf net..i replace with another modem..woo..smooth finally
moogle : is good if u can use the bridge mode..but i lack of knowledge..what i know is like this

ur w3100
connect the tel line and lan line to ur modem
dont key in username@streamyx and password..and set to bridge mode?

then ur dir 655
key in ur username@streamyx and password. and vci/vpi
mode set to bridge mode?

something like this..

This post has been edited by Moogle Stiltzkin: Jul 14 2017, 09:47 PM

haha..we both same boat .someone help..i want to learn as well.for future setup..

This post has been edited by Moogle Stiltzkin: Jul 14 2017, 09:47 PM

Just got tat modem yesterday.....does anyone know to port forward this modem?

---

Added on May 3, 2010, 6:54 pmFound internet link tat can help....anyone wan to port forward can refer this link

http://malaysia.answers.yahoo.com/question...12073320AABDTQr

This post has been edited by cffchan: May 3 2010, 06:54 PM

this modem for sure unable to login to admin page via wifi?

Yup, and it's the same with most of the modems out there as well.

yeah, i've got this modem from tm, confirmed cannot access modem setup via wireless
btw i've search the whole net for setting to get port forwarding running with this modem, and heres the only guide that works like a charm http://blog.bitcomet.com/post/182135/

This post has been edited by axxer: Sep 15 2010, 03:54 AM

today..tm technician came to my house to install modem etc2(i apply the unipack btw)

so, the 1st unit Innacomm W3400V Wireless Modem..he installed it and it works...for 3 minutes oni..after that the modem keeps disconnect/reconnect..cant access via wireless sumore..

then, he swap with another unit(same model)..it works fine now..

currently, im using a desktop n laptop connected to the unit via wireless..to my concern my hp cant connect with the modem..same goes with my bro hp..limited to 2 devices oni ka?
and my torrent is running amazingly-super-slow nau ..slower than before(before i use 512kbps nau 1Mbps)..

so, is it me only or u also think that these modem brand/model with useless?..now im thinking to buy another one..any advice?..to buy or not?if yes any recommendation on what good brand(im thinking of aztech)..

Get my expert comment: Innacomm modems are **** (fill in the blank as you wish in a negative tone). So, get a better one.

Manage to find SSID from this modem but fail to connect, error limited access, why ar? dongle for pc is tplink wn721n

Are you guys sure can't access router via wifi?.... I can access mine...using ip address.

Bro, are you using Innacomm modem and you're not connected through your LAN when you were accessing through WI-FI?
If so, may I know how did you set that and which IP address did you use to access through WI-FI?

Hello guys. I'm trying to setup this modem with my Uni's ethernet port. But unfortunately, my laptop can't detect it's signal. Anyone know what is the problem? On the modem, only LAN's led is flashing, not WLAN.

i also using Innacomm W3100. just one problem is this device very hot...can cook egg.

adapter spoil already, the original adapter not supply enough power.

Is the WLAN disabled at the modem?