As stated in my topic, anyone of u using these 2 spec tht overclock ady?
I wanna ask ur method to oc them...
i found it damn hard to oc....
i tried like 20+ times... all failed..

This post has been edited by king_lover23: Mar 25 2010, 03:50 AM

what do you mean by fail?
what is your target?

im using msi mobo...
so i set
AMD cool n quiet --> disabled
CPU ratio ---> 13
CPU NB ratio---> 9
Advanced clock calibration---> disabled
auto overclock----> disabled (when i enabled it,i need to wait the cpu blinking like 30 sec,then only the pc will start....)(when i disabled,i dun need to wait,pc straight away boot,but there is
no change in my bus speed) WHY?
HT link control---> 9
others all i cannot changed, dunno y...

the 200mhz base clock cannot change?

i think the auto overclock is a feature from the board to auto adjust the clock speed for you when you enable it.

This post has been edited by saturn85: Mar 25 2010, 04:44 AM

ya... when i disabled the autooverclock option...
Why ah ? i saw ffrom other forum,they disabled this option also...
for my case,i only get different baseclock when i enabled the autooverclock option..
>< y ?

never use this board before, but the auto overclock should be disable la, since you are now manually overclock.

check got other item that lock the base clock?

i blur a bit here... u do overclock right... is when u leaving the bios,straight away can knw whether boot up or fail?
or like my case,need to wait like 30 sec only my monitor response and come out mSI logo ?

yes, i overclock before.

for my case (different motherboard with you), after press F10 and ENTER, pc will directly reboot, no need to wait..

hmm... ic... so i think is the auto-overclock option.... I must disabled it...
but nothing changes to my clock speed... still 200Ghz....
any idea?
the forumer from other web also put
advanced clock calibration---> disabled
multi-step OC booster---> disabled

cannot enter any number to the base clock there?

no.. cannot at all.... it is in grey colour,so i cannot change it wo... haiz

flash bios might help perhaps..
i have no idea regarding ur prob

iinm i no need other setting to make the HTT "change-able"

try change all other item to see whether got any item locked the base clock?

not sure what is ur target. i havent really oc my athlonII 620 yet coz havent get a cooler for it yet. but i manage to bump my base clock a little to get to 3GHz, all other options untouched (default).

the 200mhz base clock cannot change?

got try push further with stock vcore?

bro try take some pic...i also use this mobo and it performs very well and unlock my 550 nicely... maybe the bios ver got issue with your proc
iam using bios 1.5.. usually CnQ, auto OC and Speed spectrum need to disable to manual OC.. my experience..

have u try the easy oc switch?

no >< kind of hook up with online games lately ;p play every night and no time to push my oc.

haha, i see.. just want to know how far this cpu can go with stock vcore..

can reach 3.2ghz on stock vcore. but will be around 60C at max load 100%. 40C on average load with stock cooler (enjoy the noise).

wow, 3.2 already 60c on load?
im planning to buy a hsf for it actually, coz right now, the fan occasionally become quite loud.. btw, any idea how far this proc can go?mine i guess is 100% pure propus, no extra cache avail coz the last time i tried, it wont boot.

mine also is propus core, not deneb one. max my chip can go on 1.4v is 247BCLK x 13 = 3.2GHz. and the fan is really noisy at 60C. damnit. i'd sugest you to buy better cooler if you plan to OC it. unless you can withstand the noise. if you're not ocing it, the vcore required is only 1.26v on my system. YMMV.

hmm, i done a little research on this, found out many ppl have trouble go pass 3.2GHz..but if i remember correctly, i saw 3.8GHz cpuz in 1 review..

those are on better cooling i suppose. can probably reach higher, but i sked go above 60C liao. proc dead no money to buy new one >.<

woo, a 600MHz boost with stock vcore, not bad.
stock vcore for this cpu is 1.26v? 1.35v? 1.4v?

stock cooler, stock voltage.

stable for all benchmarks used.

so in the end, how far you wanna go la?

i think i gonna aim for 3.6GHz

good luck, you'd need very good cooler for it IMO

bro goldfries, why this cpu got such weird stock vcore 1.392v? not pretty number like 1.35v?

errr, i think he meant 1.4v.

the voltage fluctuates actually, run CPU-Z and you'll see it go up down up down. rounded up is 1.4v la.

today go jalan jalan at Mines, visit few IT shop but cant find 212+ for my athlon.. next week try my luck at lowyat plaza.. if my wife allow, tats it

i wonder why amd rate these 45nm cpu at 1.4v stock vcore?
1.4v stock vcore consider a bit high right?

last time athlon x2, 90nm windsor also rate at 1.35v stock vcore only.
and the phenom ii x4 940 is 1.2v (not sure) only.

my thought exactly.. im trying to go 3.6GHz with 1.5vcore, max is 1.55 izit?

btw, i feel kind of jeles of goldfries's access to so many hardware

wah, 3.6 very hard bro. good luck~

do report back if you can get it stable at that on air cooling. though i anticipate the temp will be around 70C. do note that max temp is 71C IINM. correct me.

tried to push it up til 13x250 last nite until nearly 3am, but it wont load windows.. felt too sleepy den go sleep. tonite gonna continue adjust NB clock and vcore, die die must load windows first, lol. seriously, now i think 3.6GHz is a bit too out of reach ;p

damn sleepy now!!!

if 3.6ghz is too high, then can reach 265x13=3445mhz should be good.

My aim is simple, over 3Ghz with low voltage, at last settled at 3.12Ghz @ 1.25V




Attached thumbnail(s)

wow, this is impressive. 1.25V.. mine at 1.4V.. mean there is some room for me to lower it down..

i gotta admit defeat.. 252x13 is the max i can go on stable, but the temp go over 60/61c and the fan like chainsaw cutting thru steal, very sharp, make my ear pain, so i lower it to 3120, load temp 58/59c.. but fan occasionally still damn noisy

its ur core speed at 3.1ghz all the time? mine flatuate between 1ghz and 3ghz but i can get to 3.45ghz with 1.4v.

sorry..just realised TS talks about MSI 770-C45, i am using TA780G+ though.

Anyway, i disabled C&Q, manually set core speed to 13 X 240, and vcore. Yeah, it's running at 3.12Ghz all the time.

mine flatuate between 3-4 speed settings. i might presume maybe that all the cores are not properly synchonized at the same speed.
anyway, i do feel that even if the cpuz give me 3.2ghz .. my load time is still the same and my cpu benchmark score slightly higher.

---

Added on April 18, 2010, 1:43 amanyway it looks like theres a bios update for c45 v1.7...
anyone gave it a try?


This post has been edited by y3ivan: Apr 18 2010, 01:43 AM

wow, mine at 1.25v can only stable 2.6Ghz. did you try to unlock the proc? maybe it's a deneb chip?

errr i dont know if this a rite place to ask, but y is this heppening..?



btw i juz formated my pc from WinXP to Win7
while in WinXP i check its ok run at 2600Mhz (Constant/Tetap)
but now its change by its self...
how can i fix this?

-------------

EDIT:
ups my bad i disable cool and quite its ok again

i hope this thread alive again xD

This post has been edited by azshahmi: May 8 2010, 03:58 PM