those colored in red are d values that i altered. another thing is vdimm, tccd is kinda picky when it comes to d amount of juice we pump, no a 'lil bit more or less, must be exact...

This post has been edited by ah_khoo: Jun 18 2006, 10:04 AM


Attached File(s)
 300_2.5_4_3_7.doc ( 22k ) Number of downloads: 14

exactly

It's kinda sad that DFI doesn't have any 'lower-end' LANparty AM2 at the moment.

fast lah....

this few week will log DFI infinity Series AM2 board...

lanParty series always expensive

This post has been edited by fantasy_kenny: Jun 18 2006, 11:40 AM

Have you tried 4708 for the tref? It seems the best for chage-n-go's TCCD, but you have to change drive strength and data strength too.

yup, 3120 & 4708 are the best setting for tccd (in my case), any others will give tonnes of errors...

at the moment 3120 is d best, might try 4708 again when i hit d wall w/ current setting.

i really hate tryin drive strength & data strength, especially in 0406 bios, 4 level data strength for each level of drive strength...

lol i understand how you feel. I tweaked my system for a month when i got my expert. The higher level of data strength usually leads to instability faster. So i suggest you try from level 1 to level 4. THis should saves you some time. Drive STrength.....Level 1(weak) is the weakest, Level 7(weak) is the closest to Normal, so i suggest you try from level 1.

surprisinly i always have luck on tccd, i took 2weeks plus played w/ my ex gskill fc & 1 week plus (my target) for this patriot tccd.

but for the ocz premier series (psc chippy if i'm not mistaken) & team's utt bh-5 took me atleast a month... sumore d result not so encouragin...

thanks for d tips bro...

man..... this geil emperor ic sure kicka**. 2-3-3-0 @ 270 . i'll post some benchmark later.

u gonna score big in sandra w/ 2-3-3-x @ 270...

superb chippy there...

Is it stable in Prime95? Or just super PI?

Presenting for u guys..... 2-3-3-0.. .Geil Emperor IC.... This is the most flexible ram i ever get.....

2-4-4-7 @ 270 at 2.7v
2.5-4-4-7 @ 300 at 3.0v
2-3-3-0 @ 270 @ 3.0v

Nice kick a$$ ram you have.

This post has been edited by kingmaker_20: Jun 18 2006, 09:32 PM

good RAM...

but can't run as 2.5-3-3-6@300??

my FF can do 2.5-3-3-6@300 at 2.9v....

but the price of RAM......

Yeah.. .cannot run 2.5-3-3-6 @ 300. But this one only cost RM610. I'll say... it's a good bargain...

yup...

this price can get the performance like this is so best.....

Anyone know how to fix the 140 and 150 divider?my BH5 doing DDR600 on those dividers.

Try to disable ODC (Odd Divisor Correct) in bios.

Btw, i played with my bh-5 team xtreem and twinmos SP. Weird thing is, i hit 263 for both set. It's like something is limiting my OC. Anyone have any idea? And, izzit true that, With Opty SIngle Core Vdimm exceeding 3.5v will produced more error in memtest (dos)?

It's really weird that, i can memtest 18 loop error free, but failed superpi.

that means your ram is okay, but your processor/memcontroller needs tweaking

err....izzit those dram setting in bios?

Yes, trfc, tref, dram drive strength, data strength...

Those above are the important ones, so spend more time on those settings...