Haven't yet...only 1 card so no point also

Bought here.... now there's some retailers selling the bridge only but limited lar.
Bought it for about RM50

hope you all don't mind me asking arh...if I give the UTT 3.2-3.4V for overclocking/burning in and then do some benches..then after that reduce to 2.8 back for everyday 24/7 use...will it be okay?

depend on ur luck... but again to reduce vdimm usage from 3.3 to 2.8 wit same ram speed... u will need long hours by burning... & sometime u cant see any results... burning is more like trying a luck & some ocer do got benefit from burning....;

@L

lower the voltage of cos got no problem, but u losing out all the high fsb and timing. UTT produce less heat compare with bh5 and bh6. with the ram heat spread, i think u can use it for 24/7 even in 3.4v

why do u want to use lower voltage for UTT when this baby can take more...unless u use TCCD, that's something else...

simple really.
cuz i'm afraid if i leave it 24/7 at 3.4V and above,i'm going to bust my stuff.
Why would I want to have it at 250MHz when I'm sleeping and leaving it to download CSI right?

but i'll still overclock sikit-sikit...maybe within 10% lidat lor...gila meh buy DFI and UTT but dowan to overclock at all. Hehe.....

btw,why are those guys at xtremesystems.org having soooo many dead DFI's???
this is bloody scary man.

hrmm... i got a question here, between acbel 500W and enermax noisetaker 600W, which one is more suitable for dfi ultra D? (not going for sli) acbel has 3 12v rails with 11A, 21A and 12A while enermax has 2 12v rails with 18A and 18A. for acbel, the 11A for cpu is sufficient or not? i'm running amd64 Win 3200+

i'm using galaxy 6600gt (2.0 ns series), was wondering whether it has it own power plug or not, because the third 12v rail in acbel ipower 500W is for vga.

if there's other better psu than these, please pen down that too....

hrmm... there are more than 1 question there, sorry and thanks...

unless u gonna use 6800gt/ultra...then 2 12V rails would be sufficient...i think noisetaker 600w is good for both 6600gt or 6800gt/ultra...hmmm...even running sli...but if price would be ur considering factor...then with 6600gt, acbel 500w would be enuff...mine is noisetaker 470w...still good enuff...

that's thru also...but if the stuff can take it...will not be a problem...unless u plan to use it for another two years or something which i'd 110% confident not the case ...as long as ur stuffs temp within good range and the oc is not giving ur system a headache...just leave it oc'ed...just the thought that u buy dfi and utt but 24/7 with only 10% is such a waste...
p/s: if u wanna trade off ur utt with my tccd, let me know...my tccd is still good for downloading...

acbel 500w is more than enuff if u are not going to use SLI.. if u use SLI also enuff maa.. the enermax 600w is a better choice here, but well, i guess it is quite overkill
11A for cpu only is enuff.. other hardware will use the other 2 rails rite?
the 6pin connector is for SLI.. so if u running single 6600gt, u wont need it.

other better PSU, hmm antec 550w, enermax 480w, and of coz, OCZ powerstream 600w

OCZ Powerstream 600w...other better psu???...u make it sound like it's some kinda last option...like OCZ Powerstream 600w, boleh laaa...hahaha
u got good stuffs there irenic...no intention to have a go on SLI ka???

haha my words sound like that ar? hehe
erm SLI? i dunno.. i prefer having a high end card than dual mid range card..
but to have dual 6800gt or dual 6800ultra is super duper beyond my budget lol

and i personally prefer ATi card.. after sold my x800xt PE, i bought this 6600 for temporary use while now i'm waiting for the next ATi card.. hopefully the price will be 'good' la.. huhu.. i'm not used to nvidia card and i have never do serious 3dmark benchies with this card..

This post has been edited by irenic: Apr 10 2005, 11:11 PM

thanks a lot there, remysix and irenic....

tot of going for ocz powerstream but it's not sold in malaysia, unless dinster bring it in....

any idea where can i get enermax 600W in LYP as acbel 500W still hasn't hit our local market

wait.. how bout acbel 550W??

maybe dinster will bring the ocz powerstream in super bulk v3.0
but dunno how much it will cost
i guess u can find the enermax at All IT... erm if the acbel 550w also has dual or triple rail with total +12v more than 33A, then i guess it is good la.. logically 550w > 500w hehe

This post has been edited by irenic: Apr 11 2005, 12:11 AM

remysix :

The BH6 hit 280FSB 2225 with 3.5V Vdimm
Will try to push it again when i come back from taiwan

can i have it back...same price as i sold it to you
really rocks man...if only it's 1Gb kit...there was someone asking about this ram last time...wants to know how hi can it goes...but my mobo at that time can do 2.85vdimm only...so cannot push as hi as yours...hope that guy wont regret la...i'm sure am...NOT...hahaha
you just plain lucky man...280@2225...and this baby is rated DDR333 doing DDR560...hahaha...damn lucky la u...when u came back from taiwan...try to go for DDR600 la

ya...waiting for that Hyperbulk as well...maybe next month...somebody did request for the powerstream 600w...price for bulk might range around 800...but if you cant wait...can get the noisetaker 600w la...it's around 570 at lyp...

do you guys know why so many people in xtremesystems.org are "producing" dead DFI's and dead RAMS?
those guys overclock too high or because they tak se'skill Lowyat.net people?

no lar...i think coz thet bought the system purely for oc purpose...so...oc kaw-kaw until the system die...then buy another one...filthy rich la this people...i oc but also wanna use my pc for gaming, movie, bla, bla, bla,...maybe that's why got so many dead dfi and ram...imgaine giving ur ram 4v or even more...some can take...some just die la...hahhah

wahh.. really ar, 280fsb with 3.5vdimm . i thought im hitting the wall already. my mushkin bh6 running at 250mhz 1:1 2226 with 3.5vdimm set in bios. i guess my vcore isn't stable to handle my proc to run at 2.5g. will up the vcore later and push my mushkin...